12 months from delivery to the buyer
Items 81 - 120 of 827
In stock
Modbus TCP Bus Coupler for EtherCAT Terminals (ELxxxx)
In stock
IoT Bus Coupler for EtherCAT Terminals (ELxxxx)
In stock
4-channel digital output terminal 12 V DC, 2 A, 2-wire system
In stock
EL2068 | EtherCAT Terminal, 8-channel digital output, 24 V DC, 0.5 A, with channel diagnostics
In stock
16-channel digital output terminal 24 V DC, 0.5 A, 1-wire system
In stock
16-channel digital output terminal 24 V DC, 0.5 A, 1-wire system
In stock
Potential supply terminal, TwinSAFE Logic, 24 V DC, 10 A, 4 safe inputs, 1 safe output
In stock
4-channel analog input terminal 0…20 mA, differential input, 16 bit
In stock
License key EtherCAT Terminal for TwinCAT 3.1 (with factory-installed licences)
In stock
IO-Link terminal
In stock
TwinSAFE Logic, PROFIsafe master and slave support
In stock
Potential distribution terminal, 4 x 24 V DC, 4 x 0 V DC
In stock
AS interface potential feed terminal with filter
In stock
PROFIsafe segment end terminal
In stock
EtherCAT Box, industrial housing, 24 digital outputs, 24 V DC, Imax = 0.5 A (? 4 A), D-sub, 25-pin
In stock
EtherCAT P Box, industrial housing, 4 digital inputs 24 V DC, 3.0 ms, 4 digital outputs 24 V DC, Imax = 0.5 A, 8 x M8; I/O connection with connector: M8, screw-type
In stock
EtherCAT P cable, PUR, flex, M8, plug, straight, male, 4-pin, P-coded – M8, plug, straight, male, 4-pin, P-coded, 3.00 m
In stock
EtherCAT P cable, PUR, flex, M8, plug, straight, male, 4-pin, P-coded – M8, plug, straight, male, 4-pin, P-coded, 5.00 m
In stock
EtherCAT P cable, PUR, flex, M8, plug, straight, male, 4-pin, P-coded – M8, plug, straight, male, 4-pin, P-coded, 8.00 m
In stock
The Industrial PC C6330 is designed for the installation in a control cabinet in combination with a Control Panel as operating unit. The PC is equipped with a slot motherboard on a passive backplane.
In stock
8-channel digital input terminals 24 V DC
In stock
The CB1050 is a computer motherboard for industrial applications. Complying to the ATX form factor, it is
equipped with an mPGA479M socket which can accomodate Intel® CPUs of the Celeron® M and
Pentium® M types. With its two DIMM184 sockets memory can be added up to 2 GByte (DDR-333 max.).
Expansion cards can be added into six PCI slots and one AGP slot. The CB1050 also offers a wide range
of internal and external connectors, such as four serial ports, two LAN connectors, six USB channels, two
IDE connectors, digital and analogue audio, CRT/LCD connector etc.
In stock
The CB1050 is a computer motherboard for industrial applications. Complying to the ATX form factor, it is
equipped with an mPGA479M socket which can accomodate Intel® CPUs of the Celeron® M and
Pentium® M types. With its two DIMM184 sockets memory can be added up to 2 GByte (DDR-333 max.).
Expansion cards can be added into six PCI slots and one AGP slot. The CB1050 also offers a wide range
of internal and external connectors, such as four serial ports, two LAN connectors, six USB channels, two
IDE connectors, digital and analogue audio, CRT/LCD connector etc.
In stock
Multi-touch Control Panel CP39xx-0010 with CP-Link 4 – The One Cable Display Link, 12.1-inch display 1280 x 800, Display only, multi-finger touch screen with CP-Link 4
In stock
Standard connector for 1,000 µm plastic fibre
In stock
highly flexible, drag-chain suitable cable with 5 mio. bending cycles, max. 240 m/min, max. 30 m/s²,
min. bending radius = 89 mm (7 x OD), max. drag-chain length horizontal 20 m, vertical 5 m,
(4 x 1.5 mm² + (2 x 0.75 mm²) + (2 x AWG22)), from 25 m motor choke required
The cable is UL and CSA listed.
xxxx = ordering indication of the length of the motor cable in decimetres
In stock
highly flexible, drag-chain suitable cable with 5 mio. bending cycles, max. 240 m/min, max. 30 m/s²,
min. bending radius = 81 mm (7 x OD), max. drag-chain length horizontal 20 m, vertical 5 m,
(4 x 1 mm² + (2 x 0.75 mm²) + (2 x AWG22)), from 25 m motor choke required
The cable is UL and CSA listed.
xxxx = ordering indication of the length of the motor cable in decimetres
In stock
highly flexible, drag-chain suitable cable with 5 million bending cycles, max. 240 m/min, max. 30 m/s²,
min. bending radius = 81 mm (7 x OD), max. drag-chain length horizontal 20 m, vertical 5 m,
(4 x 1 mm² + (2 x 0.75 mm²) + (2 x AWG22))
The cable is UL and CSA listed.
xxxx = ordering indication of the length of the motor cable in decimetres
In stock
EtherCAT-P-Leitung, PUR, flex, M8, Stecker, gerade, Stift, 4‑polig, P‑kodiert – M8, Stecker, gerade, Stift, 4‑polig, P-kodiert, 3,50 m
In stock
MULTI digital output module 24 transistor outputs 24 VDC, 0.5 A
In stock
MULTI digital input module 24 inputs 24 VDC, 10 msec, sink 2 electrically isolated input groups
In stock
MULTI application memory For type B CPUs and PPs 128 KB EPROM for 42 KB instructions and 34 KB system module
In stock
MULTI expansion receiver module For connection of an expansion rack to the main rack Can be used in MULTI module racks
In stock
Expansion cable for connecting an expansion rack to the main rack Length 0.5 m
In stock
MULTI expansion sender module For connection of up to 3 expansion racks Can be used in MULTI module racks
In stock
Bernecker & Rainer ECINT1-11 interface converter RS232 RS485 RS422 B&R
In stock
MULTI power supply module 24 VDC, 100 W With extended diagnostics functions Can be used in MULTI/MIDI module racks
In stock
MULTI power supply module 240 VAC, 100 W With extended diagnostics functions Can be used in MULTI/MIDI module racks
In stock
MULTI analog output module 8 outputs, 0 to 20 mA, 11 bit
In stock
MULTI analog input module 16 inputs, 16 bit 0 to 10 V, 0 to 50 mA PT100 2- or 3-line connection NTC resistance measurement (1 - 50 kOhm) PTC resistance measurement (0 - 2 kOhm)
Items 81 - 120 of 827