Items 81 - 100 of 145
EtherCAT Box mit ID-Switch
EtherCAT Box, industrial housing, 24 digital outputs, 24 V DC, Imax = 0.5 A (? 4 A), D-sub, 25-pin
EtherCAT Box, industrial housing, 4 analog inputs for thermocouples, type J, K, L…U, 16 bit, 4 x M12; I/O connection with connector: M12, screw-type
EtherCAT P Box, industrial housing, 4 digital inputs 24 V DC, 3.0 ms, 4 digital outputs 24 V DC, Imax = 0.5 A, 8 x M8; I/O connection with connector: M8, screw-type
EtherCAT P Box, industrial housing, 8 digital inputs 24 V DC, 10 µs, or outputs 24 V DC, Imax = 0.5 A, 8 x M8
EtherCAT P cable, PUR, flex, M8, plug, straight, male, 4-pin, P-coded – M8, plug, straight, male, 4-pin, P-coded, 3.00 m
EtherCAT P cable, PUR, flex, M8, plug, straight, male, 4-pin, P-coded – M8, plug, straight, male, 4-pin, P-coded, 5.00 m
EtherCAT P cable, PUR, flex, M8, plug, straight, male, 4-pin, P-coded – M8, plug, straight, male, 4-pin, P-coded, 8.00 m
Extension Box, 4 digital inputs 24 V DC, 0.2 ms, 4 digital outputs 24 V DC, IMAX = 2 A (? 4 A), M8, I/O connection with connector: M8, 3-pin, screw-type
The Industrial PC C6330 is designed for the installation in a control cabinet in combination with a Control Panel as operating unit. The PC is equipped with a slot motherboard on a passive backplane.
2-channel digital input terminal 24 V DC, filter 3.0 ms, 4-wire system
8-channel digital input terminals 24 V DC
2-channel digital output terminals 24 V DC
2-channel digital output terminals 24 V DC
4-channel digital output terminal 24 V DC
KL3362 | Busklemme, 2-Kanal-Analog-Eingang, Spannung, ±10 V, 15 Bit, Oszilloskopfunktion
Beckhoff KL9010 bus end terminal
Potential distribution terminal, 8 x 24 V DC
Power supply terminal for any voltage up to 230 V, without LED
AS interface potential feed terminal with filter
Items 81 - 100 of 145