Artikel 1 - 20 von 59
1-Kanal-Inkremental-Encoder-Interface, 32 Bit
1-Kanal-Pulse-Train-Ausgangsklemme, 2 RS422-Ausgänge (5 V Pegel)
Servomotor 2,06 kW mit Haltebremse, Multiturn-Absolutwertgeber, EnDat 2.1, glatte Welle
Servomotor, 400 V AC, Mo = 2,37 Nm, Io = 2,95 A, nn = 6000 min-1
Servomotor, 400 V AC, Mo = 2,45 Nm, Io = 3,00 A, nn = 6000 min-1
Beckhoff AX2003-AS S60301-520 Servoverstärker digital + AX2090-B900 Ethernet Schnittstellenkarte
TwinSAFE-Drive-Optionskarte für AX5000 bis 40 A, HW 2.0: Safe Motion
8-Kanal-Digital-Eingangsklemme 24 V DC, Filter 3,0 ms, 1-Leitertechnik
8-Kanal-Digital-Eingangsklemme 24 V DC, Filter 3,0 ms, 1-Leitertechnik
4-Kanal-Digital-Eingangsklemme, TwinSAFE, 24 V DC
8-Kanal-Digital-Ausgangsklemme 24 V DC, 0,5 A, 1-Leitertechnik
4-Kanal-Digital-Ausgangsklemme, TwinSAFE, 24 V DC, 0,5 A
Busendkappe
Lightbus-Buskoppler für bis zu 64 Busklemmen
Beckhoff CP6900 Control Panel CP6900-1400-0000 10 Zoll Edelstahlfront mit DVI/USB-Extended-Anschluss
CPU-Modul CX2040, Microsoft Windows 10 IoT Enterprise 2016 LTSB, 64 Bit, TwinCAT-3-Runtime (XAR), keine Lizenzen enthalten
CPU-Modul CX5240, Microsoft Windows 10 IoT Enterprise 2019 LTSC, 64 Bit, TwinCAT-3-Runtime (XAR), keine Lizenzen enthalten
USB-Extender-2.0-Tx für CP29xx-0000 und CP39xx-0000
– USB-Extended-2.0-Senderbox
– 1 USB-Eingang mit USB-B-Buchse zum Anschluss am PC in maximal 1 m Entfernung
– 1 USB-Extended-2.0-Ausgang mit RJ45-Buchse für bis zu 50 m CAT-5-Kabel zum Anschluss eines
Control Panels mit DVI/USB-Extended-Interface CP29xx-0000 oder CP39xx-0000
– Kunststoffgehäuse zur Hutschienenmontage
– USB-Übertragungsrate bis 480 MBit/s entsprechend USB 2.0
– Schutzart IP 20
– Betriebstemperaturbereich 0…55 °C
– Abmessungen (B x H x T) 34 x 98 x 77 mm
– Stromversorgung über USB
– 1 m USB-Anschlusskabel
Hutschienen-Industrie-PC
– 800-MHz-ARM-Cortex™-A9-Prozessor (TC3: 20)
– 512 MB DDR3-RAM interner Arbeitsspeicher (nicht erweiterbar)
– Flash-Speicher: Einschub für MicroSD-Karte, 512-MB-Karte enthalten (erweiterbar)
– Protokoll: Realtime-Ethernet, ADS UDP, ADS TCP, EAP (EtherCAT Automation Protocol)
– Programmierung: TwinCAT 3 (siehe Preisliste TwinCAT)
– Schnittstellen: 1 x Ethernet 10/100 MBit/s (RJ45)
– Businterface: 2 x Ethernet RJ45 (switched)
– I/O-Anschluss: E-Bus (EtherCAT-Klemmen) oder K-Bus (Busklemmen), automatische Erkennung
– Uhr: interne, batteriegepufferte Uhr für Zeit und Datum (Batterie hinter der Frontklappe, wechselbar)
– USV: 1-Sekunden-USV (für 1 MB persistente Daten)
– Betriebssystem: Microsoft Windows Embedded Compact 7
– max. Leistungsaufnahme: 4 W
– max. Leistungsaufnahme (mit USV laden): 9 W
– Schutzart: IP 20
– Betriebs-/Lagertemperatur: -25...+60 °C/-40...+85 °C
– Gewicht: ca. 230 g
– Abmessungen (B x H x T): 71 x 100 x 73 mm
EtherCAT-P-Koppler für E-Bus-Klemmen (ELxxxx)
Artikel 1 - 20 von 59