Beckhoff
Items 1 - 50 of 81
In stock
1-channel incremental encoder interface, 32 bit
In stock
1-channel loop-powered input terminal 4…20 mA, with power supply for transducers via power contacts, 12 bit
In stock
1-channel pulse train output terminal, 2 RS422 outputs (5 V level)
In stock
Basic CPU module CX1010, 256 Mbyte RAM, DVI/USB, Windows CE, TwinCAT 2 PLC run-time
In stock
The AM2000 series of brushless Synchronous Servomotors are of outstanding Quality, they are highly dynamic, the rotors have low moments of inertia, they have excellent rotational characteristics and impressive overload capacity. The Synchronous Servomotors, in connection with digital Servo Drives from the AX2000/AX2500 series, are excellently suited for positioning tasks that make high demands on dynamics and stability. The servomotor rotors are fitted with neodymium permanent magnets. This magnetic material is an important factor in making it possible to drive these motors in a highly dynamic fashion. The motors are fitted with two-pole hollow shaft resolvers and as an option may be obtained with an holding brake.
In stock
Servomotor, 400 V AC, Mo = 2.37 Nm, Io = 2.95 A, nn = 6000 min-1
In stock
Servomotor, 400 V AC, Mo = 2.45 Nm, Io = 3.00 A, nn = 6000 min-1
In stock
Beckhoff AX2003-AS S60301-520 servo drive digital + AX2090-B900 Ethernet adapter
In stock
TwinSAFE drive option card for AX5000 up to 40 A, HW 2.0: Safe Motion
In stock
PROFIBUS Bus Coupler for up to 64 digital Bus Terminals, 12 Mbaud
In stock
8-channel digital input terminal 24 V DC, filter 3.0 ms, 1-wire system
In stock
8-channel digital input terminal 24 V DC, filter 3.0 ms, 1-wire system
In stock
4-channel digital input terminal, TwinSAFE, 24 V DC
In stock
8-channel digital output terminal 24 V DC, 0.5 A, total current 3 A, 1-wire system
In stock
4-channel digital output terminal, TwinSAFE, 24 V DC, 0.5 A
In stock
Bus end cap
In stock
4-channel digital input terminals 24 V DC
In stock
8-channel digital input terminal 24 V DC, IEC 61131-2, type 3, filter 3.0 ms, 1-wire system
In stock
2-channel digital output terminal 24 V DC
In stock
2-channel input terminal PT100 (RTD) for resistance sensors, 16 bit, 3-wire system
In stock
Serial interface RS232
In stock
TwinSAFE Logic Bus Terminal
In stock
Potential supply terminal, 24 V DC
In stock
Lightbus Bus Coupler for up to 64 Bus Terminals
In stock
Beckhoff CP6900 Control Panel CP6900-1400-0000 10 Zoll Edelstahlfront mit DVI/USB-Extended-Anschluss
In stock
Basic CPU module CX2040, Microsoft Windows 10 IoT Enterprise 2016 LTSB, 64 bit, TwinCAT 3 runtime (XAR), no licenses included
In stock
Basic CPU module CX5240, Microsoft Windows 10 IoT Enterprise 2019 LTSC, 64 bit, TwinCAT 3 runtime (XAR), no licenses included
In stock
USB Extender 2.0 Tx for CP29xx-0000 and CP39xx-0000
– USB Extended 2.0 transmitter box
– 1 USB input with USB B socket to be connected to the PC in maximum 1 m distance
– 1 USB Extended 2.0 output with RJ45 socket for up to 50 m CAT5 cable for connecting a Control Panel
with DVI/USB Extended interface CP29xx-0000 or CP39xx-0000
– plastic housing for DIN rail installation
– USB transfer rate up to 480 Mbit/s for USB 2.0
– protection class IP 20
– operating temperature 0…55 °C
– dimensions (W x H x D) 34 x 98 x 77 mm (1.3“ x 3.9“ x 3“)
– power supply via USB
– 1 m USB connector cable
In stock
Basic CPU module CX1000, 128 Mbyte RAM, Free DOS, no TwinCAT
In stock
Basic CPU module CX1010, 256 Mbyte RAM, DVI/USB, Free Dos
In stock
Interface module for 10/100 Mbit Ethernet at CX1010 CPUs
In stock
Power supply unit for CX1000, CX1010 and CX1020 core with K-bus capability
In stock
DIN rail Industrial PC
– 800 MHz ARM Cortex™-A9 processor (TC3: 20)
– 512 MB DDR3 RAM internal memory (not expandable)
– flash memory: slot for microSD card, 512 MB included (expandable)
– protocol: real-time Ethernet, ADS UDP, ADS TCP, EAP (EtherCAT Automation Protocol)
– programming: TwinCAT 3 (see TwinCAT Price List)
– interfaces: 1 x Ethernet 10/100 Mbit/s (RJ45)
– bus interface: 2 x Ethernet RJ45 (switched)
– I/O connection: E-bus (EtherCAT Terminals) or K-bus (Bus Terminals), automatic detection
– clock: internal battery-backed clock for time and date (battery behind the front flap, exchangeable)
– UPS: 1-second UPS (for 1 MB of persistent data)
– operating system: Microsoft Windows Embedded Compact 7
– max. power consumption: 4 W
– max. power consumption (with loading UPS): 9 W
– protection class: IP 20
– operating/storage temperature: -25...+60 °C/-40...+85 °C
– weight approx. 230 g
– dimensions (W x H x D) 71 x 100 x 73 mm
In stock
EtherCAT P Coupler for E-bus terminals (ELxxxx)
In stock
EtherCAT P extension
In stock
1-port EtherCAT multi-mode fibre optic junction
In stock
IoT Bus Coupler for EtherCAT Terminals (ELxxxx)
In stock
8-channel digital input terminal, TwinSAFE Logic, 24 V DC
In stock
4-channel digital output terminal 12 V DC, 2 A, 2-wire system
In stock
EL2068 | EtherCAT Terminal, 8-channel digital output, 24 V DC, 0.5 A, with channel diagnostics
In stock
16-channel digital output terminal 24 V DC, 0.5 A, 1-wire system
In stock
16-channel digital output terminal 24 V DC, 0.5 A, 1-wire system
In stock
Potential supply terminal, TwinSAFE Logic, 24 V DC, 10 A, 4 safe inputs, 1 safe output
In stock
4-channel analog input terminal 0…20 mA, differential input, 16 bit
In stock
License key EtherCAT Terminal for TwinCAT 3.1 (with factory-installed licences)
In stock
IO-Link terminal
In stock
TwinSAFE Logic, PROFIsafe master and slave support
In stock
Potential distribution terminal, 4 x 24 V DC, 4 x 0 V DC
In stock
AS interface potential feed terminal with filter
In stock
PROFIsafe segment end terminal
Items 1 - 50 of 81