Beckhoff
Items 1 - 20 of 120
In stock
Basic CPU module CX1000, 128 Mbyte RAM, Free DOS, no TwinCAT
In stock
8-channel digital input terminal, TwinSAFE Logic, 24 V DC
In stock
EtherCAT Box, industrial housing, 4 analog inputs for thermocouples, type J, K, L…U, 16 bit, 4 x M12; I/O connection with connector: M12, screw-type
In stock
EtherCAT Box, industrial housing, 8-channel digital input, TwinSAFE, 24 V DC
In stock
Siemens Sinamics Control Unit 6SL3544-0FA20-1FA0 G120D CU240D PN
In stock
Ethernet TCP/IP Bus Coupler for up to 64 Bus Terminals (with integrated 2-channel switch);
Ethernet protocols TwinCAT ADS, Modbus TCP, Beckhoff real-time Ethernet
In stock
8-channel digital input terminal, TwinSAFE Logic, 24 V DC
In stock
4-channel input terminal PT100 (RTD) for resistance sensors, 16 bit, 2-wire system
In stock
KL3362 | Busklemme, 2-Kanal-Analog-Eingang, Spannung, ±10 V, 15 Bit, Oszilloskopfunktion
In stock
1-channel incremental encoder interface, 32 bit
In stock
1-channel loop-powered input terminal 4…20 mA, with power supply for transducers via power contacts, 12 bit
In stock
Potential supply terminal, TwinSAFE Logic, 24 V DC, 10 A, 4 safe inputs, 1 safe output
In stock
EtherCAT bridge terminal
In stock
TwinSAFE Logic, PROFIsafe master and slave support
In stock
PROFIsafe segment end terminal
In stock
4-channel digital output terminal, TwinSAFE, 24 V DC, 0.5 A
In stock
4-channel input terminal PT100 (RTD) for resistance sensors, 16 bit, 3-wire system
In stock
EtherCAT P Box, industrial housing, 8 digital inputs 24 V DC, 10 µs, or outputs 24 V DC, Imax = 0.5 A, 8 x M8
In stock
highly flexible, drag-chain suitable cable with 5 mio. bending cycles, max. 240 m/min, max. 30 m/s²,
min. bending radius = 89 mm (7 x OD), max. drag-chain length horizontal 20 m, vertical 5 m,
(4 x 1.5 mm² + (2 x 0.75 mm²) + (2 x AWG22)), from 25 m motor choke required
The cable is UL and CSA listed.
xxxx = ordering indication of the length of the motor cable in decimetres
In stock
highly flexible, drag-chain suitable cable with 5 mio. bending cycles, max. 240 m/min, max. 30 m/s²,
min. bending radius = 81 mm (7 x OD), max. drag-chain length horizontal 20 m, vertical 5 m,
(4 x 1 mm² + (2 x 0.75 mm²) + (2 x AWG22)), from 25 m motor choke required
The cable is UL and CSA listed.
xxxx = ordering indication of the length of the motor cable in decimetres
Items 1 - 20 of 120