Beckhoff
Items 1 - 40 of 120
In stock
1-channel incremental encoder interface, 32 bit
In stock
1-channel loop-powered input terminal 4…20 mA, with power supply for transducers via power contacts, 12 bit
In stock
1-channel pulse train output terminal, 2 RS422 outputs (5 V level)
In stock
2-channel digital input terminal 24 V DC, filter 0.2 ms, 4-wire system
In stock
4-channel analog input terminal 0…10 V, single-ended, 12 bit, 4 x 2-wire system
In stock
8-channel digital input terminal 24 V DC, filter 3.0 ms, 1-wire system
In stock
4-channel digital input terminal, TwinSAFE, 24 V DC
In stock
4-channel input terminal PT100 (RTD) for resistance sensors, 16 bit, 2-wire system
In stock
8-channel digital input terminal 24 V DC, filter 10 µs, 1-wire system
In stock
9-pin D-sub connector for PROFIBUS (12 Mbaud) with switchable termination resistor and programming interface
In stock
TwinSAFE drive option card for AX5000 up to 40 A, HW 2.0: Safe Motion
In stock
PROFIBUS Bus Coupler for up to 64 digital Bus Terminals, 12 Mbaud
In stock
Ethernet TCP/IP Bus Coupler for up to 64 Bus Terminals (with integrated 2-channel switch);
Ethernet protocols TwinCAT ADS, Modbus TCP, Beckhoff real-time Ethernet
In stock
8-channel digital input terminal 24 V DC, filter 3.0 ms, 1-wire system
In stock
8-channel digital input terminal 24 V DC, filter 3.0 ms, 1-wire system
In stock
4-channel digital input terminal, TwinSAFE, 24 V DC
In stock
8-channel digital output terminal 24 V DC, 0.5 A, total current 3 A, 1-wire system
In stock
8-channel digital output terminal 24 V DC, 0.5 A, total current 3 A, 1-wire system
In stock
4-channel digital output terminal, TwinSAFE, 24 V DC, 0.5 A
In stock
4-channel digital output terminal, TwinSAFE, 24 V DC, 0.5 A
In stock
Bus end cap
In stock
4-channel digital input terminals 24 V DC
In stock
2-channel digital input terminal 24 V DC with short-circuit protected sensor supply and diagnostics
In stock
8-channel digital input terminal 24 V DC, IEC 61131-2, type 3, filter 3.0 ms, 1-wire system
In stock
2-channel digital output terminal 24 V DC
In stock
2-channel input terminal PT100 (RTD) for resistance sensors, 16 bit, 3-wire system
In stock
Serial interface RS232
In stock
TwinSAFE Logic Bus Terminal
In stock
Potential supply terminal, 24 V DC
In stock
2-channel loop-powered input terminals 4…20 mA
In stock
Lightbus Bus Coupler for up to 64 Bus Terminals
In stock
CPU-Module CX1010, 256 MByte RAM, operating system Free DOS on Compact Flash CX1900-0013
In stock
USB Extender 2.0 Tx for CP29xx-0000 and CP39xx-0000
– USB Extended 2.0 transmitter box
– 1 USB input with USB B socket to be connected to the PC in maximum 1 m distance
– 1 USB Extended 2.0 output with RJ45 socket for up to 50 m CAT5 cable for connecting a Control Panel
with DVI/USB Extended interface CP29xx-0000 or CP39xx-0000
– plastic housing for DIN rail installation
– USB transfer rate up to 480 Mbit/s for USB 2.0
– protection class IP 20
– operating temperature 0…55 °C
– dimensions (W x H x D) 34 x 98 x 77 mm (1.3“ x 3.9“ x 3“)
– power supply via USB
– 1 m USB connector cable
In stock
Basic CPU module CX1000, 128 Mbyte RAM, Free DOS, no TwinCAT
In stock
Interface module for 10/100 Mbit Ethernet at CX1010 CPUs
In stock
Power supply unit for CX1000, CX1010 and CX1020 core with K-bus capability
In stock
EtherCAT Coupler for E-bus terminals (ELxxxx), with M8 screw-type connectors
In stock
EtherCAT P Coupler for E-bus terminals (ELxxxx)
In stock
EtherCAT P extension
In stock
1-port EtherCAT multi-mode fibre optic junction
Items 1 - 40 of 120