Beckhoff
Items 1 - 20 of 130
In stock
Siemens Sinamics Control Unit 6SL3544-0FA20-1FA0 G120D CU240D PN
In stock
The AM2000 series of brushless Synchronous Servomotors are of outstanding Quality, they are highly dynamic, the rotors have low moments of inertia, they have excellent rotational characteristics and impressive overload capacity. The Synchronous Servomotors, in connection with digital Servo Drives from the AX2000/AX2500 series, are excellently suited for positioning tasks that make high demands on dynamics and stability. The servomotor rotors are fitted with neodymium permanent magnets. This magnetic material is an important factor in making it possible to drive these motors in a highly dynamic fashion. The motors are fitted with two-pole hollow shaft resolvers and as an option may be obtained with an holding brake.
In stock
Beckhoff AX2003-AS S60301-520 servo drive digital + AX2090-B900 Ethernet adapter
In stock
TwinSAFE drive option card for AX5000 up to 40 A, HW 2.0: Safe Motion
In stock
Lightbus Bus Coupler for up to 64 Bus Terminals
In stock
PROFIBUS Bus Coupler for up to 64 digital Bus Terminals, 12 Mbaud
In stock
PROFIBUS “Economy plus“ Bus Coupler for up to 64 Bus Terminals (255 with K-bus extension), 12 Mbaud
In stock
SERCOS interface Bus Coupler for up to 64 Bus Terminals, 2.4 Mbaud
In stock
Ethernet TCP/IP Bus Coupler for up to 64 Bus Terminals; Ethernet protocols TwinCAT ADS, Modbus TCP,
Beckhoff real-time Ethernet
In stock
Ethernet TCP/IP Bus Coupler for up to 64 Bus Terminals (with integrated 2-channel switch);
Ethernet protocols TwinCAT ADS, Modbus TCP, Beckhoff real-time Ethernet
In stock
Beckhoff CP6900 Control Panel CP6900-1400-0000 10 Zoll Edelstahlfront mit DVI/USB-Extended-Anschluss
In stock
USB Extender 2.0 Tx for CP29xx-0000 and CP39xx-0000
– USB Extended 2.0 transmitter box
– 1 USB input with USB B socket to be connected to the PC in maximum 1 m distance
– 1 USB Extended 2.0 output with RJ45 socket for up to 50 m CAT5 cable for connecting a Control Panel
with DVI/USB Extended interface CP29xx-0000 or CP39xx-0000
– plastic housing for DIN rail installation
– USB transfer rate up to 480 Mbit/s for USB 2.0
– protection class IP 20
– operating temperature 0…55 °C
– dimensions (W x H x D) 34 x 98 x 77 mm (1.3“ x 3.9“ x 3“)
– power supply via USB
– 1 m USB connector cable
In stock
Basic CPU module CX1000, 128 Mbyte RAM, Free DOS, no TwinCAT
In stock
CPU-Module CX1010, 256 MByte RAM, operating system Free DOS on Compact Flash CX1900-0013
In stock
Basic CPU module CX1010, 256 Mbyte RAM, DVI/USB, Free Dos
In stock
Interface module for 2 x RS232 connections (COM3 + COM4)
– can only be used instead and not simultaneously with system interface CX1010-N041
– full 115 kbaud on both channels
– electrically isolated interfaces (optically isolated)
– pre-assembled ex factory, no field modification possible
– protection class IP 20
– operating/storage temperature 0 °C ... +55 °C/-25 °C ... +85 °C
– weight approx. 80 g
– dimensions (W x H x D) 19 x 100 x 51 mm
In stock
Interface module for 10/100 Mbit Ethernet at CX1010 CPUs
In stock
Power supply unit for CX1000, CX1010 and CX1020 core with K-bus capability
– 24 V DC (-15 %/+20 %)
– integrated K-bus controller
– K-bus power supply up to max. 1.75 A
– 8 kB NOVRAM
– 2 kB DPRAM I/O memory for K-bus process data
– FSTN display 2 lines x 16 characters of text, lighted, Navi switch 4+1
– protection class IP 20
– operating/storage temperature 0 °C ... +55 °C/-25 °C ... +85 °C
– weight approx. 250 g
– dimensions (W x H x D) 40 x 100 x 91 mm
In stock
Power supply unit for CX1000, CX1010 and CX1020 core with K-bus capability
In stock
DIN rail Industrial PC
– 32 bit, 400 MHz CPU
– 512 MB microSD flash memory (optionally 1 GB, 2 GB, 4 GB or 8 GB)
– 64 MB internal main memory
– protocol: CANopen master, CAN Layer 2 Kommunikation
– operating system: Microsoft Windows Embedded CE 6.0
– programming: TwinCAT 2 PLC
– interfaces: 1 x Ethernet 10/100 Mbit/s (RJ45), 1 x USB device (behind the front flap)
– bus interface: D-sub connector, 9-pin according to CANopen specification, galvanically decoupled
– I/O connection: E-bus (EtherCAT Terminals) or K-bus (Bus Terminals), automatic detection
– clock: internal battery-backed clock for time and date (battery behind the front flap, exchangeable)
– UPS: 1-second UPS (for 1 MB of persistent data)
– protection class: IP 20
– weight approx. 180 g
– dimensions (W x H x D) 64 x 100 x 73 mm
Items 1 - 20 of 130