Items 1 - 20 of 47
Up/down counter 24 V DC, 1 kHz, 32 bit counter depth
Power supply unit for CX1000, CX1010 and CX1020 core with K-bus capability
– 24 V DC (-15 %/+20 %)
– integrated K-bus controller
– K-bus power supply up to max. 1.75 A
– 8 kB NOVRAM
– 2 kB DPRAM I/O memory for K-bus process data
– FSTN display 2 lines x 16 characters of text, lighted, Navi switch 4+1
– protection class IP 20
– operating/storage temperature 0 °C ... +55 °C/-25 °C ... +85 °C
– weight approx. 250 g
– dimensions (W x H x D) 40 x 100 x 91 mm
Power supply terminal for E-bus, 24 V DC, 2 A
Passive potential feed terminal, 24 V DC
EtherCAT/Ethernet cable, PUR, highflex, M8, plug, straight, male, 4-pin, A?coded – M8, plug, straight, male, 4-pin, A-coded, 5.00 m
DIN rail Industrial PC
– 32 bit, 400 MHz CPU
– 512 MB microSD flash memory (optionally 1 GB, 2 GB, 4 GB or 8 GB)
– 64 MB internal main memory
– protocol: CANopen master, CAN Layer 2 Kommunikation
– operating system: Microsoft Windows Embedded CE 6.0
– programming: TwinCAT 2 PLC
– interfaces: 1 x Ethernet 10/100 Mbit/s (RJ45), 1 x USB device (behind the front flap)
– bus interface: D-sub connector, 9-pin according to CANopen specification, galvanically decoupled
– I/O connection: E-bus (EtherCAT Terminals) or K-bus (Bus Terminals), automatic detection
– clock: internal battery-backed clock for time and date (battery behind the front flap, exchangeable)
– UPS: 1-second UPS (for 1 MB of persistent data)
– protection class: IP 20
– weight approx. 180 g
– dimensions (W x H x D) 64 x 100 x 73 mm
Bus end cover for ELxxxx, cover for power and E-bus contacts, grey
EtherCAT-P-Leitung, PUR, flex, M8, Stecker, gerade, Stift, 4‑polig, P‑kodiert – M8, Stecker, gerade, Stift, 4‑polig, P-kodiert, 3,50 m
highly flexible, drag-chain suitable cable with 5 million bending cycles, max. 240 m/min, max. 30 m/s²,
min. bending radius = 81 mm (7 x OD), max. drag-chain length horizontal 20 m, vertical 5 m,
(4 x 1 mm² + (2 x 0.75 mm²) + (2 x AWG22))
The cable is UL and CSA listed.
xxxx = ordering indication of the length of the motor cable in decimetres
highly flexible, drag-chain suitable cable with 5 mio. bending cycles, max. 240 m/min, max. 30 m/s²,
min. bending radius = 81 mm (7 x OD), max. drag-chain length horizontal 20 m, vertical 5 m,
(4 x 1 mm² + (2 x 0.75 mm²) + (2 x AWG22)), from 25 m motor choke required
The cable is UL and CSA listed.
xxxx = ordering indication of the length of the motor cable in decimetres
highly flexible, drag-chain suitable cable with 5 mio. bending cycles, max. 240 m/min, max. 30 m/s²,
min. bending radius = 89 mm (7 x OD), max. drag-chain length horizontal 20 m, vertical 5 m,
(4 x 1.5 mm² + (2 x 0.75 mm²) + (2 x AWG22)), from 25 m motor choke required
The cable is UL and CSA listed.
xxxx = ordering indication of the length of the motor cable in decimetres
2-channel analog output terminal 0-10 V, manual/automatic operation
2-channel relay module 230 V AC, 6 A, manual/automatic operation, switch and relay state readable
2-channel relay module 230 V AC, 6 A, manual/automatic operation, switch and relay state readable
2-channel digital output terminals 24 V DC
8-channel digital input terminals 24 V DC
Extension Box, 4 digital inputs 24 V DC, 0.2 ms, 4 digital outputs 24 V DC, IMAX = 2 A (? 4 A), M8, I/O connection with connector: M8, 3-pin, screw-type
EtherCAT P cable, PUR, flex, M8, plug, straight, male, 4-pin, P-coded – M8, plug, straight, male, 4-pin, P-coded, 8.00 m
EtherCAT P cable, PUR, flex, M8, plug, straight, male, 4-pin, P-coded – M8, plug, straight, male, 4-pin, P-coded, 5.00 m
EtherCAT P cable, PUR, flex, M8, plug, straight, male, 4-pin, P-coded – M8, plug, straight, male, 4-pin, P-coded, 3.00 m
Items 1 - 20 of 47