Items 1 - 50 of 457
1-channel incremental encoder interface, 32 bit
1-channel pulse train output terminal, 2 RS422 outputs (5 V level)
ABL Sursum Steckdose Schutzkontakt Frontplattenmontage 1-fach Außen Thermoplast Schwarz, 2-polig / 16A
Guardmaster Tls-Gd2 Guardlock
Bremswiderstand, 450 W, 50 R, IP20, Reihenklemmen
Line filter, passive, 30 A, 3x 520 VAC, 50/60 Hz, IP20
2003 digital input module, 16 inputs 24 VDC, 1 ms, sink/source, order 3x TB718 terminal blocks separately.
2003 terminal block, 36-pin, cage clamps
2003 interface module, 1 RS232 interface, screw-in module
X20 Power supply bus module, 24 VDC keyed, internal I/O supply interrupted to the left
POWERLINK/Ethernet-Verbindungskabel, RJ45 auf RJ45, 0,35 m
POWERLINK/Ethernet-Verbindungskabel, RJ45 auf RJ45, 1,5 m
POWERLINK/Ethernet-Verbindungskabel, RJ45 auf RJ45, 2,0 m
12 digital inputs 24 VDC for 1-wire connections
12 digital outputs 24 VDC for 1-wire connections
Zubehör Feldklemme, 2-polig (3,81), Federzugklemme 1,5 mm²
Balluff Sensor BES Q40KFU-GNX35F-S92G-EEX für explosionsgefährdete Bereiche
Balluff BLE 18K-UU-1K-E5-C-S4 Photoelektrischer Sensor
TwinSAFE drive option card for AX5000 up to 40 A, HW 2.0: Safe Motion
8-channel digital input terminal 24 V DC, filter 3.0 ms, 1-wire system
USB Extender 2.0 Tx for CP29xx-0000 and CP39xx-0000
– USB Extended 2.0 transmitter box
– 1 USB input with USB B socket to be connected to the PC in maximum 1 m distance
– 1 USB Extended 2.0 output with RJ45 socket for up to 50 m CAT5 cable for connecting a Control Panel
with DVI/USB Extended interface CP29xx-0000 or CP39xx-0000
– plastic housing for DIN rail installation
– USB transfer rate up to 480 Mbit/s for USB 2.0
– protection class IP 20
– operating temperature 0…55 °C
– dimensions (W x H x D) 34 x 98 x 77 mm (1.3“ x 3.9“ x 3“)
– power supply via USB
– 1 m USB connector cable
EtherCAT P Coupler for E-bus terminals (ELxxxx)
EtherCAT P extension
4-channel digital output terminal 12 V DC, 2 A, 2-wire system
EL2068 | EtherCAT Terminal, 8-channel digital output, 24 V DC, 0.5 A, with channel diagnostics
16-channel digital output terminal 24 V DC, 0.5 A, 1-wire system
16-channel digital output terminal 24 V DC, 0.5 A, 1-wire system
Potential supply terminal, TwinSAFE Logic, 24 V DC, 10 A, 4 safe inputs, 1 safe output
4-channel analog input terminal 0…20 mA, differential input, 16 bit
IO-Link terminal
Potential distribution terminal, 4 x 24 V DC, 4 x 0 V DC
AS interface potential feed terminal with filter
PROFIsafe segment end terminal
EtherCAT Box mit ID-Switch
EtherCAT P Box, industrial housing, 4 digital inputs 24 V DC, 3.0 ms, 4 digital outputs 24 V DC, Imax = 0.5 A, 8 x M8; I/O connection with connector: M8, screw-type
EtherCAT P cable, PUR, flex, M8, plug, straight, male, 4-pin, P-coded – M8, plug, straight, male, 4-pin, P-coded, 3.00 m
EtherCAT P cable, PUR, flex, M8, plug, straight, male, 4-pin, P-coded – M8, plug, straight, male, 4-pin, P-coded, 5.00 m
EtherCAT P cable, PUR, flex, M8, plug, straight, male, 4-pin, P-coded – M8, plug, straight, male, 4-pin, P-coded, 8.00 m
8-channel digital input terminals 24 V DC
external braking resistor, 10 Ohm, 100 W, for EL9576 brake chopper terminal and for KL9570 Bus Terminal
highly flexible, drag-chain suitable cable with 5 mio. bending cycles, max. 240 m/min, max. 30 m/s²,
min. bending radius = 89 mm (7 x OD), max. drag-chain length horizontal 20 m, vertical 5 m,
(4 x 1.5 mm² + (2 x 0.75 mm²) + (2 x AWG22)), from 25 m motor choke required
The cable is UL and CSA listed.
xxxx = ordering indication of the length of the motor cable in decimetres
highly flexible, drag-chain suitable cable with 5 mio. bending cycles, max. 240 m/min, max. 30 m/s²,
min. bending radius = 81 mm (7 x OD), max. drag-chain length horizontal 20 m, vertical 5 m,
(4 x 1 mm² + (2 x 0.75 mm²) + (2 x AWG22)), from 25 m motor choke required
The cable is UL and CSA listed.
xxxx = ordering indication of the length of the motor cable in decimetres
highly flexible, drag-chain suitable cable with 5 million bending cycles, max. 240 m/min, max. 30 m/s²,
min. bending radius = 81 mm (7 x OD), max. drag-chain length horizontal 20 m, vertical 5 m,
(4 x 1 mm² + (2 x 0.75 mm²) + (2 x AWG22))
The cable is UL and CSA listed.
xxxx = ordering indication of the length of the motor cable in decimetres
EtherCAT-P-Leitung, PUR, flex, M8, Stecker, gerade, Stift, 4‑polig, P‑kodiert – M8, Stecker, gerade, Stift, 4‑polig, P-kodiert, 3,50 m
MULTI digital output module 24 transistor outputs 24 VDC, 0.5 A
MULTI digital input module 24 inputs 24 VDC, 10 msec, sink 2 electrically isolated input groups
MULTI application memory For type B CPUs and PPs 128 KB EPROM for 42 KB instructions and 34 KB system module
MULTI expansion receiver module For connection of an expansion rack to the main rack Can be used in MULTI module racks
Expansion cable for connecting an expansion rack to the main rack Length 0.5 m
MULTI expansion sender module For connection of up to 3 expansion racks Can be used in MULTI module racks
Items 1 - 50 of 457