12 months from delivery to the buyer
Items 61 - 80 of 104
In stock
EtherCAT P Box, industrial housing, 8 digital inputs 24 V DC, 10 µs, or outputs 24 V DC, Imax = 0.5 A, 8 x M8
In stock
EtherCAT P cable, PUR, flex, M8, plug, straight, male, 4-pin, P-coded – M8, plug, straight, male, 4-pin, P-coded, 3.00 m
In stock
EtherCAT P cable, PUR, flex, M8, plug, straight, male, 4-pin, P-coded – M8, plug, straight, male, 4-pin, P-coded, 5.00 m
In stock
EtherCAT P cable, PUR, flex, M8, plug, straight, male, 4-pin, P-coded – M8, plug, straight, male, 4-pin, P-coded, 8.00 m
In stock
The Industrial PC C6330 is designed for the installation in a control cabinet in combination with a Control Panel as operating unit. The PC is equipped with a slot motherboard on a passive backplane.
In stock
8-channel digital input terminals 24 V DC
In stock
Potential distribution terminal, 8 x 24 V DC
In stock
Power supply terminal for any voltage up to 230 V, without LED
In stock
The CB1050 is a computer motherboard for industrial applications. Complying to the ATX form factor, it is
equipped with an mPGA479M socket which can accomodate Intel® CPUs of the Celeron® M and
Pentium® M types. With its two DIMM184 sockets memory can be added up to 2 GByte (DDR-333 max.).
Expansion cards can be added into six PCI slots and one AGP slot. The CB1050 also offers a wide range
of internal and external connectors, such as four serial ports, two LAN connectors, six USB channels, two
IDE connectors, digital and analogue audio, CRT/LCD connector etc.
In stock
The CB1050 is a computer motherboard for industrial applications. Complying to the ATX form factor, it is
equipped with an mPGA479M socket which can accomodate Intel® CPUs of the Celeron® M and
Pentium® M types. With its two DIMM184 sockets memory can be added up to 2 GByte (DDR-333 max.).
Expansion cards can be added into six PCI slots and one AGP slot. The CB1050 also offers a wide range
of internal and external connectors, such as four serial ports, two LAN connectors, six USB channels, two
IDE connectors, digital and analogue audio, CRT/LCD connector etc.
In stock
Multi-touch Control Panel CP39xx-0010 with CP-Link 4 – The One Cable Display Link, 12.1-inch display 1280 x 800, Display only, multi-finger touch screen with CP-Link 4
In stock
Standard connector for 1,000 µm plastic fibre
In stock
Fan cartridge for EtherCAT and Bus Terminals
In stock
external braking resistor, 10 Ohm, 100 W, for EL9576 brake chopper terminal and for KL9570 Bus Terminal
In stock
EtherCAT/Ethernet cable, PUR, flex, M8, plug, straight, male, 4-pin, A-coded – M12, flange, straight, female, 4-pin, D-coded, 2.00 m
In stock
EtherCAT/Ethernet patch cable, PUR, RJ45, plug, straight, male, 8-pin – RJ45, plug, straight, male, 8-pin, 0.26 m
In stock
highly flexible, drag-chain suitable cable with 5 mio. bending cycles, max. 240 m/min, max. 30 m/s²,
min. bending radius = 89 mm (7 x OD), max. drag-chain length horizontal 20 m, vertical 5 m,
(4 x 1.5 mm² + (2 x 0.75 mm²) + (2 x AWG22)), from 25 m motor choke required
The cable is UL and CSA listed.
xxxx = ordering indication of the length of the motor cable in decimetres
In stock
highly flexible, drag-chain suitable cable with 5 mio. bending cycles, max. 240 m/min, max. 30 m/s²,
min. bending radius = 81 mm (7 x OD), max. drag-chain length horizontal 20 m, vertical 5 m,
(4 x 1 mm² + (2 x 0.75 mm²) + (2 x AWG22)), from 25 m motor choke required
The cable is UL and CSA listed.
xxxx = ordering indication of the length of the motor cable in decimetres
In stock
highly flexible, drag-chain suitable cable with 5 million bending cycles, max. 240 m/min, max. 30 m/s²,
min. bending radius = 81 mm (7 x OD), max. drag-chain length horizontal 20 m, vertical 5 m,
(4 x 1 mm² + (2 x 0.75 mm²) + (2 x AWG22))
The cable is UL and CSA listed.
xxxx = ordering indication of the length of the motor cable in decimetres
In stock
EtherCAT P cable, PUR, flex, M8, plug, straight, male, 4-pin, P-coded – M8, plug, straight, male, 4-pin, P-coded, 1.50 m
Items 61 - 80 of 104