Items 41 - 80 of 1284
New sealed
Used
Defective
New
New No Box
memory card
as shown on photo
Manual (pdf Download)
12 months from delivery to the buyer
Reset all filters
ACOPOS P3 Servoverstärker, 1 digitale Multistandard Geberschnittstelle je Achse, 3x 200-480 VAC, 1,6 A, 1 Achse, Wandmontage, Stecke rsatz einreihig, Abdeckung
X20 Analog input module, 4 inputs, ±10 V or 0 to 20 mA / 4 to 20 mA, 13-bit converter resolution, input filter configurable
2003 digital input module, 8 inputs 24 VDC, 1 ms, sink/source, order 3x 7TB710 terminal blocks separately.
2003 digital input module, 8 inputs 24 VDC, 1 ms, sink/source, order 3x 7TB710 terminal blocks separately.
Bremswiderstand, 450 W, 50 R, IP20, Reihenklemmen
ACOPOSmulti shielding component set: 1x single shielding plate type 0; 1x hose clamp, B 9 mm, D 12-22 mm
ACOPOS P3 motor hybrid cable, length 15 m, 4x 1.5 mm² + 2x 0.75 mm² + 2x 0.30 mm² + 2x 2x 0.15 mm², motor hybrid connector SpeedTec 13-pin female size 1, suitable for drag chains
ACOPOS P3 motor hybrid cable, length 17 m, 4x 1.5 mm² + 2x 0.75 mm² + 2x 0.30 mm² + 2x 2x 0.15 mm², motor hybrid connector SpeedTec 13-pin female size 1, suitable for drag chains
ACOPOS P3 motor hybrid cable, length 9 m, 4x 1.5 mm² + 2x 0.75 mm² + 2x 0.30 mm² + 2x 2x 0.15 mm², motor hybrid connector SpeedTec 13-pin female size 1, suitable for drag chains
Line filter, passive, 30 A, 3x 520 VAC, 50/60 Hz, IP20
B&R Automation bus module X20 BM 33 (X20BM33)
B&R Automation bus module X20 BM 33 (X20BM33)
B&R Automation digital input module X67 DI 1371.L12 (X67DI1371.L12
2003 digital output module, 8 relay outputs 240 VAC / 30 VDC, 2 A
2-phase hybrid stepper motor, 60 mm flange, 62 mm length, 2.5 A serial / 5 A parallel, 1.7 Nm holding torque, 1.2 Nm stall torque
2003 analog input module, 1 input, ±10 V or 0 to 20 mA, 12-bit + sign, screw-in module, order 1x TB712 terminal block separately.
2003 analog input module, 1 input, ±10 V or 0 to 20 mA, 12-bit + sign, screw-in module, order 1x TB712 terminal block separately.
2003 analog output module 2 outputs, ±10 V or 0 to 20 mA, 12-bit, screw-in module, order 1x terminal block TB712 separately!
2003 analog input module, 4 inputs, thermocouple, -270 to +1372°C, screw-in module, order 1x TB712 terminal block separately.
2003 CPU 100 KB SRAM, 512 KB FlashPROM 24 VDC, 12,6 W supply 1 RS232 interface 1 CAN interface CAN: elec. isolated, network-capable 4 slots for screw-in modules max. 208 digital / 80 analog EAs
2003 CPU, 100 KB SRAM, 256 KB FlashPROM, 24 VDC, 7 W supply, 1 RS232 interface, 1 CAN interface, CAN: electrically isolated, network-capable
2003 digital output module, 8 FET outputs 24 VDC, 2 A, outputs can be optionally used as inputs, order 3x 7TB710 terminal blocks separately.
2003 digital output module, , 4X1 SSR 5A/...240VAC
2003 remote I/O bus controller 24 VDC, 14 W power supply 1 electrically isolated RS485 interface for connecting to remote I/O bus
2003 remote I/O bus controller 24 VDC, 14 W power supply 1 electrically isolated RS485 interface for connecting to remote I/O bus
2003 POWERLINK bus controller, 4 POWERLINK interfaces, 24 VDC, electrically isolated, order 1x TB704 terminal block separately.
2003 interface module, 1 RS232 interface, screw-in module
2005 analog mixed module, 4 inputs, 0 to 20 mA, 12-bit, 4 outputs, 0 to 20 mA, 12-bit, order 1x terminal block TB170 separately!
2005 digital output module, 16 relay outputs 120 VAC / 24 VDC, 2 A, 4 electrically isolated output groups, order 1x TB170 terminal block separately.
2005 interface module, 1 RS232 interface, 2 RS485/RS422 interfaces, electrically isolated, network-capable, CPU and interface module insert
4 digitale Eingänge, 2 digitale Ausgänge, 1 analoger Eingang, 1 analoger Ausgang, Sonderfunktionen
The X20SP1130 is a power supply module from the B&R X20 series with an integrated safe digital output. It provides 24 V DC I/O voltage for a potential group and can selectively shut it down in the event of a safety event.
B&R ECPU10-0 Zentraleinheit CPU10.
B&R digital input module X20DIF371 X20 DI F371
MULTI Anwenderspeicher für Typ B CPUs und PPs 384 KB FlashPROM für 42 KB Anweisungen, 34 KB Systemmodul und 296 KB Anwenderdaten
MULTI Netzteilmodul 24 VDC, 50 W einsetzbar in MULTI/MIDI Baugruppentr.
MULTI NETZGERÄTEMODUL 24 V
MULTI Zählmodul (positionieren) 1 Eingang für Inkrementalgeber, 24 Bit Eingangsfrequenz 50 kHz 1 analoger Ausgang +/- 10 V, 11 Bit Gebereingang nicht potentialgetrennt Geberversorgung 5 bis 15 VDC 6stellige 7-Segmentanzeige
POWERLINK/Ethernet-Verbindungskabel, RJ45 auf RJ45, 0,35 m
POWERLINK/Ethernet connection cable, RJ45 to RJ45, 0.50 m
Items 41 - 80 of 1284