Items 141 - 160 of 969
New surplus
Defective
New
bus plug
holding clamps
sealing
supply plug
as shown on photo
Reset all filters
Powerflex Component Class DSI CopyCat Hand Held HIM
Eaton NZM4-XTDVR Neu
ELREST 201500001 CM. REV.2 - Neu
ELREST 203100004 modulo - DIO16.1 OG Neu
ELREST 204200004A modulo - AIO8.11, 12/8BIT analog 12Bit In V1.1/12 Neu
Endress+Hauser ATT11 -A11D31A4D1 Automatisierungsteil Neu (Restposten)
Schneider Electric M200 40I/O,Ac220, 24 TM200C40R SPS-Grundgeräte M200
Sew BW050-008-01 Bremswiderstand 17962242 Neu, unbenutzt
Vega SWING63.XXGBVXPR Neu (ungenutzt) Prozesstemp. -50...+150°C Länge 200mm
Sew DFS21B Kit | Neu | 18238637
Eaton XN-2AO-U(-10/0...10VDC) Analog Ausgangsmodul 140066 Neu, unbenutzt
ACOPOS P3 motor hybrid cable, length 25 m, 4x 1.5 mm² + 2x 0.75 mm² + 2x 0.30 mm² + 2x 2x 0.15 mm², motor hybrid connector SpeedTec 13-pin female size 1, suitable for drag chains
SIMATIC S7-300 Geregelte Stromversorgung PS307 Eingang: AC 120/230 V Ausgang: DC 24 V/5 A
Safety switch: locked; XCSLF; NC x2 + NO; IP66; metal
Powerflex Component Class DSI CopyCat Hand Held HIM
ACOPOSmulti plug-in module, EnDat 2.1 interface
Sanftanlasser für Asynchronmotor, ATS01, 9A, 380-415 V, 4 KW
Sanftanlasser für Asynchronmotor, ATS01, 12A, 380-415V, 5,5 KW
SINAMICS Power Module PM240-2 with integrated class A filter with integrated brake chopper 3AC380-480V+10/-10% 47-63Hz power high overload: 0.37kW at 200% 3S, 150% 57S, 100% 240S; Ambient temperature -10 to +50°C; Low overload power: 0.55kW at 150% 3S, 110% 57S, 100% 240S; Ambient temperature -10 to +40°C 196x 73x 165 (HxWxD), FSA protection class IP20 without control unit and operating unit released from CU firmware version V4.6
SIMATIC S7-1500, digital output module DQ16x24 V DC/0.5A HF; 16 channels in groups of 8; 4 A per group; single-channel diagnostics; substitute value: switching cycle counter for connected actuators. the module supports the safety-oriented shutdown of load groups up to SIL2 according to EN IEC 62061:2021 and Category 3 / PL d according to EN ISO 13849-1:2015. front connector (screw terminals or push-in) to be ordered separately
Items 141 - 160 of 969