Beckhoff
Items 31 - 57 of 57
In stock
Potential distribution terminal, 4 x 24 V DC, 4 x 0 V DC
In stock
Power supply terminal for E-bus, 24 V DC, 2 A
In stock
AS interface potential feed terminal with filter
In stock
PROFIsafe segment end terminal
In stock
EtherCAT Box mit ID-Switch
In stock
EtherCAT Box, industrial housing, 24 digital outputs, 24 V DC, Imax = 0.5 A (? 4 A), D-sub, 25-pin
In stock
EtherCAT P Box, industrial housing, 4 digital inputs 24 V DC, 3.0 ms, 4 digital outputs 24 V DC, Imax = 0.5 A, 8 x M8; I/O connection with connector: M8, screw-type
In stock
Extension Box, 4 digital inputs 24 V DC, 0.2 ms, 4 digital outputs 24 V DC, IMAX = 2 A (? 4 A), M8, I/O connection with connector: M8, 3-pin, screw-type
In stock
2-channel digital input terminal 24 V DC, filter 0.2 ms, 4-wire system
In stock
2-channel digital input terminal 24 V DC with short-circuit protected sensor supply and diagnostics
In stock
8-channel digital input terminals 24 V DC
In stock
2-channel digital output terminals 24 V DC
In stock
1-channel pulse train output terminal, 2 RS422 outputs (5 V level)
In stock
2-channel relay module 230 V AC, 6 A, manual/automatic operation, switch and relay state readable
In stock
2-channel relay module 230 V AC, 6 A, manual/automatic operation, switch and relay state readable
In stock
2-channel analog output terminal 0-10 V, manual/automatic operation
In stock
2-channel loop-powered input terminals 4…20 mA
In stock
9-pin D-sub connector for PROFIBUS (12 Mbaud) with switchable termination resistor and programming interface
In stock
external braking resistor, 10 Ohm, 100 W, for EL9576 brake chopper terminal and for KL9570 Bus Terminal
In stock
EtherCAT/Ethernet cable, PUR, highflex, M8, plug, straight, male, 4-pin, A?coded – M8, plug, straight, male, 4-pin, A-coded, 5.00 m
In stock
highly flexible, drag-chain suitable cable with 5 mio. bending cycles, max. 240 m/min, max. 30 m/s²,
min. bending radius = 81 mm (7 x OD), max. drag-chain length horizontal 20 m, vertical 5 m,
(4 x 1 mm² + (2 x 0.75 mm²) + (2 x AWG22)), from 25 m motor choke required
The cable is UL and CSA listed.
xxxx = ordering indication of the length of the motor cable in decimetres
In stock
highly flexible, drag-chain suitable cable with 5 mio. bending cycles, max. 240 m/min, max. 30 m/s²,
min. bending radius = 89 mm (7 x OD), max. drag-chain length horizontal 20 m, vertical 5 m,
(4 x 1.5 mm² + (2 x 0.75 mm²) + (2 x AWG22)), from 25 m motor choke required
The cable is UL and CSA listed.
xxxx = ordering indication of the length of the motor cable in decimetres
In stock
highly flexible, drag-chain suitable cable with 5 million bending cycles, max. 240 m/min, max. 30 m/s²,
min. bending radius = 81 mm (7 x OD), max. drag-chain length horizontal 20 m, vertical 5 m,
(4 x 1 mm² + (2 x 0.75 mm²) + (2 x AWG22))
The cable is UL and CSA listed.
xxxx = ordering indication of the length of the motor cable in decimetres
In stock
EtherCAT P cable, PUR, flex, M8, plug, straight, male, 4-pin, P-coded – M8, plug, straight, male, 4-pin, P-coded, 3.00 m
In stock
EtherCAT-P-Leitung, PUR, flex, M8, Stecker, gerade, Stift, 4‑polig, P‑kodiert – M8, Stecker, gerade, Stift, 4‑polig, P-kodiert, 3,50 m
In stock
EtherCAT P cable, PUR, flex, M8, plug, straight, male, 4-pin, P-coded – M8, plug, straight, male, 4-pin, P-coded, 5.00 m
In stock
EtherCAT P cable, PUR, flex, M8, plug, straight, male, 4-pin, P-coded – M8, plug, straight, male, 4-pin, P-coded, 8.00 m
Items 31 - 57 of 57