Items 1 - 20 of 42
Passive potential feed terminal, 24 V DC
Potential distribution terminal, 4 x 24 V DC, 4 x 0 V DC
8-channel digital input terminals 24 V DC
EtherCAT P cable, PUR, flex, M8, plug, straight, male, 4-pin, P-coded – M8, plug, straight, male, 4-pin, P-coded, 3.00 m
EtherCAT P cable, PUR, flex, M8, plug, straight, male, 4-pin, P-coded – M8, plug, straight, male, 4-pin, P-coded, 5.00 m
external braking resistor, 10 Ohm, 100 W, for EL9576 brake chopper terminal and for KL9570 Bus Terminal
EtherCAT-P-Leitung, PUR, flex, M8, Stecker, gerade, Stift, 4‑polig, P‑kodiert – M8, Stecker, gerade, Stift, 4‑polig, P-kodiert, 3,50 m
4-channel digital output terminal 12 V DC, 2 A, 2-wire system
EL2068 | EtherCAT Terminal, 8-channel digital output, 24 V DC, 0.5 A, with channel diagnostics
EtherCAT/Ethernet cable, PUR, highflex, M8, plug, straight, male, 4-pin, A?coded – M8, plug, straight, male, 4-pin, A-coded, 5.00 m
EtherCAT P cable, PUR, flex, M8, plug, straight, male, 4-pin, P-coded – M8, plug, straight, male, 4-pin, P-coded, 8.00 m
16-channel digital output terminal 24 V DC, 0.5 A, 1-wire system
16-channel digital output terminal 24 V DC, 0.5 A, 1-wire system
highly flexible, drag-chain suitable cable with 5 million bending cycles, max. 240 m/min, max. 30 m/s²,
min. bending radius = 81 mm (7 x OD), max. drag-chain length horizontal 20 m, vertical 5 m,
(4 x 1 mm² + (2 x 0.75 mm²) + (2 x AWG22))
The cable is UL and CSA listed.
xxxx = ordering indication of the length of the motor cable in decimetres
AS interface potential feed terminal with filter
Power supply terminal for E-bus, 24 V DC, 2 A
8-channel digital input terminal 24 V DC, filter 3.0 ms, 1-wire system
EtherCAT P Box, industrial housing, 4 digital inputs 24 V DC, 3.0 ms, 4 digital outputs 24 V DC, Imax = 0.5 A, 8 x M8; I/O connection with connector: M8, screw-type
IO-Link terminal
USB Extender 2.0 Tx for CP29xx-0000 and CP39xx-0000
– USB Extended 2.0 transmitter box
– 1 USB input with USB B socket to be connected to the PC in maximum 1 m distance
– 1 USB Extended 2.0 output with RJ45 socket for up to 50 m CAT5 cable for connecting a Control Panel
with DVI/USB Extended interface CP29xx-0000 or CP39xx-0000
– plastic housing for DIN rail installation
– USB transfer rate up to 480 Mbit/s for USB 2.0
– protection class IP 20
– operating temperature 0…55 °C
– dimensions (W x H x D) 34 x 98 x 77 mm (1.3“ x 3.9“ x 3“)
– power supply via USB
– 1 m USB connector cable
Items 1 - 20 of 42