Items 1 - 50 of 74
Bus end cap
4-channel digital input terminals 24 V DC
2-channel digital output terminal 24 V DC
2-channel digital input terminal 24 V DC, filter 3.0 ms, 4-wire system
4-channel digital output terminal 24 V DC
Beckhoff KL9010 bus end terminal
Potential distribution terminal, 8 x 24 V DC
Power supply terminal for any voltage up to 230 V, without LED
Potential supply terminal, 24 V DC
Serial interface RS232
2-channel digital output terminals 24 V DC
Passive potential feed terminal, 24 V DC
8-channel digital input terminal 24 V DC, IEC 61131-2, type 3, filter 3.0 ms, 1-wire system
PROFIBUS Bus Coupler for up to 64 digital Bus Terminals, 12 Mbaud
AS interface potential feed terminal with filter
Potential distribution terminal, 4 x 24 V DC, 4 x 0 V DC
8-channel digital input terminals 24 V DC
EtherCAT P cable, PUR, flex, M8, plug, straight, male, 4-pin, P-coded – M8, plug, straight, male, 4-pin, P-coded, 3.00 m
EtherCAT P cable, PUR, flex, M8, plug, straight, male, 4-pin, P-coded – M8, plug, straight, male, 4-pin, P-coded, 5.00 m
EtherCAT-P-Leitung, PUR, flex, M8, Stecker, gerade, Stift, 4‑polig, P‑kodiert – M8, Stecker, gerade, Stift, 4‑polig, P-kodiert, 3,50 m
4-channel digital output terminal 12 V DC, 2 A, 2-wire system
Interface module for 10/100 Mbit Ethernet at CX1010 CPUs
EL2068 | EtherCAT Terminal, 8-channel digital output, 24 V DC, 0.5 A, with channel diagnostics
EtherCAT/Ethernet cable, PUR, highflex, M8, plug, straight, male, 4-pin, A?coded – M8, plug, straight, male, 4-pin, A-coded, 5.00 m
EtherCAT P cable, PUR, flex, M8, plug, straight, male, 4-pin, P-coded – M8, plug, straight, male, 4-pin, P-coded, 8.00 m
Power supply unit for CX1000, CX1010 and CX1020 core with K-bus capability
16-channel digital output terminal 24 V DC, 0.5 A, 1-wire system
PROFIBUS “Economy plus“ Bus Coupler for up to 64 Bus Terminals (255 with K-bus extension), 12 Mbaud
8-channel digital input terminal 24 V DC, filter 3.0 ms, 1-wire system
8-channel digital output terminal 24 V DC, 0.5 A, total current 3 A, 1-wire system
2-channel input terminal PT100 (RTD) for resistance sensors, 16 bit, 3-wire system
16-channel digital output terminal 24 V DC, 0.5 A, 1-wire system
highly flexible, drag-chain suitable cable with 5 million bending cycles, max. 240 m/min, max. 30 m/s²,
min. bending radius = 81 mm (7 x OD), max. drag-chain length horizontal 20 m, vertical 5 m,
(4 x 1 mm² + (2 x 0.75 mm²) + (2 x AWG22))
The cable is UL and CSA listed.
xxxx = ordering indication of the length of the motor cable in decimetres
AS interface potential feed terminal with filter
EtherCAT Coupler for E-bus terminals (ELxxxx)
Power supply terminal for E-bus, 24 V DC, 2 A
8-channel digital input terminal 24 V DC, filter 3.0 ms, 1-wire system
4-channel digital output terminal, TwinSAFE, 24 V DC, 0.5 A
8-channel digital input terminal, TwinSAFE Logic, 24 V DC
Lightbus Bus Coupler for up to 64 Bus Terminals
EtherCAT P Box, industrial housing, 4 digital inputs 24 V DC, 3.0 ms, 4 digital outputs 24 V DC, Imax = 0.5 A, 8 x M8; I/O connection with connector: M8, screw-type
IO-Link terminal
USB Extender 2.0 Tx for CP29xx-0000 and CP39xx-0000
– USB Extended 2.0 transmitter box
– 1 USB input with USB B socket to be connected to the PC in maximum 1 m distance
– 1 USB Extended 2.0 output with RJ45 socket for up to 50 m CAT5 cable for connecting a Control Panel
with DVI/USB Extended interface CP29xx-0000 or CP39xx-0000
– plastic housing for DIN rail installation
– USB transfer rate up to 480 Mbit/s for USB 2.0
– protection class IP 20
– operating temperature 0…55 °C
– dimensions (W x H x D) 34 x 98 x 77 mm (1.3“ x 3.9“ x 3“)
– power supply via USB
– 1 m USB connector cable
EtherCAT P extension
TwinSAFE drive option card for AX5000 up to 40 A, HW 2.0: Safe Motion
1-channel pulse train output terminal, 2 RS422 outputs (5 V level)
TwinSAFE Logic Bus Terminal
4-channel digital input terminal, TwinSAFE, 24 V DC
EtherCAT P Coupler for E-bus terminals (ELxxxx)
4-channel analog input terminal 0…20 mA, differential input, 16 bit
Items 1 - 50 of 74