Beckhoff
Items 81 - 100 of 130
In stock
2-channel digital output terminals 24 V DC
In stock
2-channel digital output terminals 24 V DC
In stock
4-channel digital output terminal 24 V DC
In stock
KL3362 | Busklemme, 2-Kanal-Analog-Eingang, Spannung, ±10 V, 15 Bit, Oszilloskopfunktion
In stock
Beckhoff KL9010 bus end terminal
In stock
Potential distribution terminal, 8 x 24 V DC
In stock
Power supply terminal for any voltage up to 230 V, without LED
In stock
AS interface potential feed terminal with filter
In stock
2-channel relay module 230 V AC, 6 A, manual/automatic operation, switch and relay state readable
In stock
2-channel relay module 230 V AC, 6 A, manual/automatic operation, switch and relay state readable
In stock
2-channel analog output terminal 0-10 V, manual/automatic operation
In stock
Standard connector for 1,000 µm plastic fibre
In stock
Fan cartridge for EtherCAT and Bus Terminals
In stock
external braking resistor, 10 Ohm, 100 W, for EL9576 brake chopper terminal and for KL9570 Bus Terminal
In stock
EtherCAT/Ethernet cable, PUR, flex, M8, plug, straight, male, 4-pin, A-coded – M12, flange, straight, female, 4-pin, D-coded, 2.00 m
In stock
EtherCAT/Ethernet patch cable, PUR, RJ45, plug, straight, male, 8-pin – RJ45, plug, straight, male, 8-pin, 0.26 m
In stock
highly flexible, drag-chain suitable cable with 5 mio. bending cycles, max. 240 m/min, max. 30 m/s²,
min. bending radius = 89 mm (7 x OD), max. drag-chain length horizontal 20 m, vertical 5 m,
(4 x 1.5 mm² + (2 x 0.75 mm²) + (2 x AWG22)), from 25 m motor choke required
The cable is UL and CSA listed.
xxxx = ordering indication of the length of the motor cable in decimetres
In stock
highly flexible, drag-chain suitable cable with 5 mio. bending cycles, max. 240 m/min, max. 30 m/s²,
min. bending radius = 81 mm (7 x OD), max. drag-chain length horizontal 20 m, vertical 5 m,
(4 x 1 mm² + (2 x 0.75 mm²) + (2 x AWG22)), from 25 m motor choke required
The cable is UL and CSA listed.
xxxx = ordering indication of the length of the motor cable in decimetres
In stock
highly flexible, drag-chain suitable cable with 5 million bending cycles, max. 240 m/min, max. 30 m/s²,
min. bending radius = 81 mm (7 x OD), max. drag-chain length horizontal 20 m, vertical 5 m,
(4 x 1 mm² + (2 x 0.75 mm²) + (2 x AWG22))
The cable is UL and CSA listed.
xxxx = ordering indication of the length of the motor cable in decimetres
In stock
EtherCAT P cable, PUR, flex, M8, plug, straight, male, 4-pin, P-coded – M8, plug, straight, male, 4-pin, P-coded, 1.50 m
Items 81 - 100 of 130