Beckhoff
Items 1 - 14 of 14
In stock
Basic CPU module CX1010, 256 Mbyte RAM, DVI/USB, Windows CE, TwinCAT 2 PLC run-time
In stock
The AM2000 series of brushless Synchronous Servomotors are of outstanding Quality, they are highly dynamic, the rotors have low moments of inertia, they have excellent rotational characteristics and impressive overload capacity. The Synchronous Servomotors, in connection with digital Servo Drives from the AX2000/AX2500 series, are excellently suited for positioning tasks that make high demands on dynamics and stability. The servomotor rotors are fitted with neodymium permanent magnets. This magnetic material is an important factor in making it possible to drive these motors in a highly dynamic fashion. The motors are fitted with two-pole hollow shaft resolvers and as an option may be obtained with an holding brake.
In stock
Beckhoff AX2003-AS S60301-520 servo drive digital + AX2090-B900 Ethernet adapter
In stock
Ethernet TCP/IP Bus Coupler for up to 64 Bus Terminals; Ethernet protocols TwinCAT ADS, Modbus TCP,
Beckhoff real-time Ethernet
In stock
Beckhoff CP6900 Control Panel CP6900-1400-0000 10 Zoll Edelstahlfront mit DVI/USB-Extended-Anschluss
In stock
Basic CPU module CX1010, 256 Mbyte RAM, DVI/USB, Free Dos
In stock
Basic CPU module CX1010, 256 Mbyte RAM, DVI/USB, Free Dos
In stock
DIN rail Industrial PC
– 800 MHz ARM Cortex™-A9 processor (TC3: 20)
– 512 MB DDR3 RAM internal memory (not expandable)
– flash memory: slot for microSD card, 512 MB included (expandable)
– protocol: real-time Ethernet, ADS UDP, ADS TCP, EAP (EtherCAT Automation Protocol)
– programming: TwinCAT 3 (see TwinCAT Price List)
– interfaces: 1 x Ethernet 10/100 Mbit/s (RJ45)
– bus interface: 2 x Ethernet RJ45 (switched)
– I/O connection: E-bus (EtherCAT Terminals) or K-bus (Bus Terminals), automatic detection
– clock: internal battery-backed clock for time and date (battery behind the front flap, exchangeable)
– UPS: 1-second UPS (for 1 MB of persistent data)
– operating system: Microsoft Windows Embedded Compact 7
– max. power consumption: 4 W
– max. power consumption (with loading UPS): 9 W
– protection class: IP 20
– operating/storage temperature: -25...+60 °C/-40...+85 °C
– weight approx. 230 g
– dimensions (W x H x D) 71 x 100 x 73 mm
In stock
IoT Bus Coupler for EtherCAT Terminals (ELxxxx)
In stock
DIN rail Industrial PC
– 32 bit, 400 MHz CPU
– 512 MB microSD flash memory (optionally 1 GB, 2 GB, 4 GB or 8 GB)
– 64 MB internal main memory
– protocol: CANopen master, CAN Layer 2 Kommunikation
– operating system: Microsoft Windows Embedded CE 6.0
– programming: TwinCAT 2 PLC
– interfaces: 1 x Ethernet 10/100 Mbit/s (RJ45), 1 x USB device (behind the front flap)
– bus interface: D-sub connector, 9-pin according to CANopen specification, galvanically decoupled
– I/O connection: E-bus (EtherCAT Terminals) or K-bus (Bus Terminals), automatic detection
– clock: internal battery-backed clock for time and date (battery behind the front flap, exchangeable)
– UPS: 1-second UPS (for 1 MB of persistent data)
– protection class: IP 20
– weight approx. 180 g
– dimensions (W x H x D) 64 x 100 x 73 mm
In stock
Modbus TCP Bus Coupler for EtherCAT Terminals (ELxxxx)
In stock
Power supply unit for CX1000, CX1010 and CX1020 core with K-bus capability
– 24 V DC (-15 %/+20 %)
– integrated K-bus controller
– K-bus power supply up to max. 1.75 A
– 8 kB NOVRAM
– 2 kB DPRAM I/O memory for K-bus process data
– FSTN display 2 lines x 16 characters of text, lighted, Navi switch 4+1
– protection class IP 20
– operating/storage temperature 0 °C ... +55 °C/-25 °C ... +85 °C
– weight approx. 250 g
– dimensions (W x H x D) 40 x 100 x 91 mm
In stock
PROFINET RT controller terminal
In stock
SERCOS interface Bus Coupler for up to 64 Bus Terminals, 2.4 Mbaud
Items 1 - 14 of 14