Beckhoff
Beckhoff
Items 1 - 50 of 56
In stock
Bus end cover for ELxxxx, cover for power and E-bus contacts, grey
In stock
Power cable, PUR, flex, M8, socket, straight, female, 4-pin, A-coded – open end, 2.00 m
In stock
2-channel digital output terminals 24 V DC
In stock
Power cable, PUR, flex, M8, plug, straight, male, 4-pin, A?coded – M8, socket, straight, female, 4-pin, A-coded, 0.50 m
In stock
Beckhoff Power cable M8 4-pin connector 0.5 m ZK2020-3334-0005
In stock
2-channel digital input terminal 24 V DC, filter 0.2 ms, 4-wire system
In stock
EtherCAT/Ethernet cable, PUR, flex, M12, plug, straight, male, 4-pin, D‑coded – M12, plug, straight, male, 4-pin, D-coded, 0.50 m
In stock
2-channel digital input terminal 24 V DC with short-circuit protected sensor supply and diagnostics
In stock
9-pin D-sub connector for PROFIBUS (12 Mbaud) with switchable termination resistor and programming interface
In stock
EtherCAT/Ethernet cable, PUR, flex, M12, plug, straight, male, 4-pin, D?coded – RJ45, plug, straight, male, 8-pin, 1.00 m
In stock
8-channel digital input terminals 24 V DC
In stock
8-point digital output terminal 24 V DC
In stock
EtherCAT P cable, PUR, flex, M8, plug, straight, male, 4-pin, P-coded – M8, plug, straight, male, 4-pin, P-coded, 3.00 m
In stock
EtherCAT P cable, PUR, flex, M8, plug, straight, male, 4-pin, P-coded – M8, plug, straight, male, 4-pin, P-coded, 5.00 m
In stock
EtherCAT-P-Leitung, PUR, flex, M8, Stecker, gerade, Stift, 4‑polig, P‑kodiert – M8, Stecker, gerade, Stift, 4‑polig, P-kodiert, 3,50 m
In stock
Power supply terminal for E-bus, 24 V DC, 2 A with diagnostics
In stock
8-channel digital input terminal 24 V DC, filter 3.0 ms, 1-wire system
In stock
EL2068 | EtherCAT Terminal, 8-channel digital output, 24 V DC, 0.5 A, with channel diagnostics
In stock
2-channel relay module 230 V AC, 6 A, manual/automatic operation, switch and relay state readable
In stock
EtherCAT P cable, PUR, flex, M8, plug, straight, male, 4-pin, P-coded – M8, plug, straight, male, 4-pin, P-coded, 8.00 m
In stock
2-channel relay module 230 V AC, 6 A, manual/automatic operation, switch and relay state readable
In stock
16-channel digital output terminal 24 V DC, 0.5 A, 1-wire system
In stock
Extension Box, 4 digital inputs 24 V DC, 0.2 ms, 4 digital outputs 24 V DC, IMAX = 2 A (? 4 A), M8, I/O connection with connector: M8, 3-pin, screw-type
In stock
16-channel digital output terminal 24 V DC, 0.5 A, 1-wire system
In stock
EtherCAT Box, industrial housing, 8-channel digital input, 24 V DC, 3.0 ms, 8 x M8; I/O connection with connector: M8, screw-type
In stock
AS interface potential feed terminal with filter
In stock
Power supply terminal for E-bus, 24 V DC, 2 A
In stock
CPU-Module CX1010, 256 MByte RAM, operating system Free DOS on Compact Flash CX1900-0013
In stock
1-port Ethernet Switch terminal
In stock
2-channel analog output terminal 0-10 V, manual/automatic operation
In stock
IO-Link terminal
In stock
EtherCAT P Coupler for E-bus terminals (ELxxxx)
In stock
4-channel analog input terminal 0…20 mA, differential input, 16 bit
In stock
1-channel SinCos encoder interface, 1 VPP
In stock
Up/down counter 24 V DC, 1 kHz, 32 bit counter depth
In stock
highly flexible, drag-chain suitable cable with 5 mio. bending cycles, max. 240 m/min, max. 30 m/s²,
min. bending radius = 89 mm (7 x OD), max. drag-chain length horizontal 20 m, vertical 5 m,
(4 x 1.5 mm² + (2 x 0.75 mm²) + (2 x AWG22)), from 25 m motor choke required
The cable is UL and CSA listed.
xxxx = ordering indication of the length of the motor cable in decimetres
In stock
highly flexible, drag-chain suitable cable with 5 mio. bending cycles, max. 240 m/min, max. 30 m/s²,
min. bending radius = 81 mm (7 x OD), max. drag-chain length horizontal 20 m, vertical 5 m,
(4 x 1 mm² + (2 x 0.75 mm²) + (2 x AWG22)), from 25 m motor choke required
The cable is UL and CSA listed.
xxxx = ordering indication of the length of the motor cable in decimetres
In stock
PROFIsafe segment end terminal
In stock
Beckhoff servo motor EtherCAT terminal EL7211-9014 servo motor terminal 48VDC 1xSTO
In stock
1-channel incremental encoder interface, 32 bit
In stock
EtherCAT Box, 2-channel analog input + 2-channel analog output, multi-function, ±10 V, 0/4…20 mA, 16 bit, differential, M12
In stock
EtherCAT Box, industrial housing, 4 analog outputs -10…+10 V or 0/4…20 mA, parameterisable, 16 bit, 4 x M12; I/O connection with connector: M12, screw-type
In stock
EtherCAT Box, industrial housing, 4 analog differential inputs -10…+10 V or 0/4…20 mA, parameterisable, 16 bit, 4 x M12; I/O connection with connector: M12, screw-type
In stock
Ethernet TCP/IP Bus Coupler for up to 64 Bus Terminals; Ethernet protocols TwinCAT ADS, Modbus TCP,
Beckhoff real-time Ethernet
In stock
Servomotor, 24…48 V DC, Mo = 2.37 Nm, Io = 8.0 A, nn = 1000 min-1
In stock
Incremental encoder interface with differential input, 16/32 bit
In stock
DIN rail Industrial PC
– 800 MHz ARM Cortex™-A9 processor (TC3: 20)
– 512 MB DDR3 RAM internal memory (not expandable)
– flash memory: slot for microSD card, 512 MB included (expandable)
– protocol: real-time Ethernet, ADS UDP, ADS TCP, EAP (EtherCAT Automation Protocol)
– programming: TwinCAT 3 (see TwinCAT Price List)
– interfaces: 1 x Ethernet 10/100 Mbit/s (RJ45)
– bus interface: 2 x Ethernet RJ45 (switched)
– I/O connection: E-bus (EtherCAT Terminals) or K-bus (Bus Terminals), automatic detection
– clock: internal battery-backed clock for time and date (battery behind the front flap, exchangeable)
– UPS: 1-second UPS (for 1 MB of persistent data)
– operating system: Microsoft Windows Embedded Compact 7
– max. power consumption: 4 W
– max. power consumption (with loading UPS): 9 W
– protection class: IP 20
– operating/storage temperature: -25...+60 °C/-40...+85 °C
– weight approx. 230 g
– dimensions (W x H x D) 71 x 100 x 73 mm
In stock
Basic CPU module CX1010, 256 Mbyte RAM, DVI/USB, Free Dos
In stock
Ultra-compact Industrial PC C6015-0010
with option C9900-C582:processor Intel Atom® E3827, 1.75 GHz, 2 cores (TC2, TC3: 40) and memory extension to 4 GB DDR3L RAM
In stock
CX9020 CPU module, Microsoft Windows Embedded Compact 7, TwinCAT 3 Runtime (XAR),
with options:
CX9020-U900 internal capacitive 1-second UPS for securely saving persistent application data to the MicroSD card
CX1900-0123 1 GB MicroSD card, instead of 512 MB MicroSD card
TC1200-0030 TwinCAT 3 PLC, Platform Level 30 (Economy Plus)
Items 1 - 50 of 56