Items 1 - 32 of 32
1-channel incremental encoder interface, 32 bit
1-channel pulse train output terminal, 2 RS422 outputs (5 V level)
TwinSAFE drive option card for AX5000 up to 40 A, HW 2.0: Safe Motion
8-channel digital input terminal 24 V DC, filter 3.0 ms, 1-wire system
USB Extender 2.0 Tx for CP29xx-0000 and CP39xx-0000
– USB Extended 2.0 transmitter box
– 1 USB input with USB B socket to be connected to the PC in maximum 1 m distance
– 1 USB Extended 2.0 output with RJ45 socket for up to 50 m CAT5 cable for connecting a Control Panel
with DVI/USB Extended interface CP29xx-0000 or CP39xx-0000
– plastic housing for DIN rail installation
– USB transfer rate up to 480 Mbit/s for USB 2.0
– protection class IP 20
– operating temperature 0…55 °C
– dimensions (W x H x D) 34 x 98 x 77 mm (1.3“ x 3.9“ x 3“)
– power supply via USB
– 1 m USB connector cable
EtherCAT P Coupler for E-bus terminals (ELxxxx)
EtherCAT P extension
Modbus TCP Bus Coupler for EtherCAT Terminals (ELxxxx)
4-channel digital output terminal 12 V DC, 2 A, 2-wire system
EL2068 | EtherCAT Terminal, 8-channel digital output, 24 V DC, 0.5 A, with channel diagnostics
16-channel digital output terminal 24 V DC, 0.5 A, 1-wire system
16-channel digital output terminal 24 V DC, 0.5 A, 1-wire system
Potential supply terminal, TwinSAFE Logic, 24 V DC, 10 A, 4 safe inputs, 1 safe output
4-channel analog input terminal 0…20 mA, differential input, 16 bit
IO-Link terminal
Potential distribution terminal, 4 x 24 V DC, 4 x 0 V DC
AS interface potential feed terminal with filter
PROFIsafe segment end terminal
EtherCAT P Box, industrial housing, 4 digital inputs 24 V DC, 3.0 ms, 4 digital outputs 24 V DC, Imax = 0.5 A, 8 x M8; I/O connection with connector: M8, screw-type
EtherCAT P cable, PUR, flex, M8, plug, straight, male, 4-pin, P-coded – M8, plug, straight, male, 4-pin, P-coded, 3.00 m
EtherCAT P cable, PUR, flex, M8, plug, straight, male, 4-pin, P-coded – M8, plug, straight, male, 4-pin, P-coded, 5.00 m
EtherCAT P cable, PUR, flex, M8, plug, straight, male, 4-pin, P-coded – M8, plug, straight, male, 4-pin, P-coded, 8.00 m
8-channel digital input terminals 24 V DC
highly flexible, drag-chain suitable cable with 5 mio. bending cycles, max. 240 m/min, max. 30 m/s²,
min. bending radius = 89 mm (7 x OD), max. drag-chain length horizontal 20 m, vertical 5 m,
(4 x 1.5 mm² + (2 x 0.75 mm²) + (2 x AWG22)), from 25 m motor choke required
The cable is UL and CSA listed.
xxxx = ordering indication of the length of the motor cable in decimetres
highly flexible, drag-chain suitable cable with 5 mio. bending cycles, max. 240 m/min, max. 30 m/s²,
min. bending radius = 81 mm (7 x OD), max. drag-chain length horizontal 20 m, vertical 5 m,
(4 x 1 mm² + (2 x 0.75 mm²) + (2 x AWG22)), from 25 m motor choke required
The cable is UL and CSA listed.
xxxx = ordering indication of the length of the motor cable in decimetres
highly flexible, drag-chain suitable cable with 5 million bending cycles, max. 240 m/min, max. 30 m/s²,
min. bending radius = 81 mm (7 x OD), max. drag-chain length horizontal 20 m, vertical 5 m,
(4 x 1 mm² + (2 x 0.75 mm²) + (2 x AWG22))
The cable is UL and CSA listed.
xxxx = ordering indication of the length of the motor cable in decimetres
EtherCAT-P-Leitung, PUR, flex, M8, Stecker, gerade, Stift, 4‑polig, P‑kodiert – M8, Stecker, gerade, Stift, 4‑polig, P-kodiert, 3,50 m
DIN rail Industrial PC
– 32 bit, 400 MHz CPU
– 512 MB microSD flash memory (optionally 1 GB, 2 GB, 4 GB or 8 GB)
– 64 MB internal main memory
– protocol: CANopen master, CAN Layer 2 Kommunikation
– operating system: Microsoft Windows Embedded CE 6.0
– programming: TwinCAT 2 PLC
– interfaces: 1 x Ethernet 10/100 Mbit/s (RJ45), 1 x USB device (behind the front flap)
– bus interface: D-sub connector, 9-pin according to CANopen specification, galvanically decoupled
– I/O connection: E-bus (EtherCAT Terminals) or K-bus (Bus Terminals), automatic detection
– clock: internal battery-backed clock for time and date (battery behind the front flap, exchangeable)
– UPS: 1-second UPS (for 1 MB of persistent data)
– protection class: IP 20
– weight approx. 180 g
– dimensions (W x H x D) 64 x 100 x 73 mm
EtherCAT/Ethernet cable, PUR, highflex, M8, plug, straight, male, 4-pin, A?coded – M8, plug, straight, male, 4-pin, A-coded, 5.00 m
Passive potential feed terminal, 24 V DC
Power supply terminal for E-bus, 24 V DC, 2 A
Up/down counter 24 V DC, 1 kHz, 32 bit counter depth
Items 1 - 32 of 32