New No Box
Items 1 - 40 of 47
In stock
1-channel loop-powered input terminal 4…20 mA, with power supply for transducers via power contacts, 12 bit
In stock
SIMATIC S7-1500, digital input module DI 32x24 V DC HF, 32 channels in groups of 16; of which 2 inputs as counters can be used; input delay 0.05..20 ms input type 3 (IEC 61131); diagnostics; hardware interrupts: front connector (screw terminals or push-in) to be ordered separately
In stock
Altech CS087A-LR touch switch M8x0,75 with cable 3m
In stock
Altech CS087A-LR touch switch M8x0,75 mit Stecker M8 3-polig
In stock
B&R X20 Feldklemme 12 pol. Safety codiert - X20TB52
In stock
2005 programmable I/O processor, 850 kB SRAM, 1.5 MB FlashPROM, 1 RS232 interface, 1 CAN interface, CAN: Electrically isolated, network-capable, max. 12 digital inputs 24 VDC, sink, max. 12 digital outputs 24 VDC, 0.1 A, 6 analog inputs ±10 V, 14-bit, 6 analog outputs ±10 V, 12-bit, 2 outputs with +10 V and -10 V per terminal block
In stock
B&R X20 Bus module for SafeIO modules - X20BM33
In stock
Balluff BCC034E cable with plug M12x1 5-pole 10m 3 wires connected (Pin 1,3,4), A-coded, PVC cable,
BCC M415-0000-1A-001-VX8334-100
In stock
The AM2000 series of brushless Synchronous Servomotors are of outstanding Quality, they are highly dynamic, the rotors have low moments of inertia, they have excellent rotational characteristics and impressive overload capacity. The Synchronous Servomotors, in connection with digital Servo Drives from the AX2000/AX2500 series, are excellently suited for positioning tasks that make high demands on dynamics and stability. The servomotor rotors are fitted with neodymium permanent magnets. This magnetic material is an important factor in making it possible to drive these motors in a highly dynamic fashion. The motors are fitted with two-pole hollow shaft resolvers and as an option may be obtained with an holding brake.
In stock
1-port EtherCAT multi-mode fibre optic junction
In stock
IoT Bus Coupler for EtherCAT Terminals (ELxxxx)
In stock
TwinSAFE Logic, PROFIsafe master and slave support
In stock
The Industrial PC C6330 is designed for the installation in a control cabinet in combination with a Control Panel as operating unit. The PC is equipped with a slot motherboard on a passive backplane.
In stock
Standard connector for 1,000 µm plastic fibre
In stock
C&K 7401 switch 4-pole ON-NONE-ON
In stock
DIN rail perforated - NS 35/ 7,5 PERF 2000MM
In stock
The FDU AC Drive offers unmatched performance and control for variable torque applications such as pumps, fans, compressors, and blowers. A wide array of features such as patented Shaft Power Monitoring, and multi-pump control are also standard.
In stock
Service unit combination MSB6-1/2:C3:J1:F12-WP Size=6 Series=MS Actuator lock=(* Rotary knob with lock * with accessories lockable) Assembly position=Vertical +/- 5 Grade of filtration=40 m
In stock
Article number:E10903
for M12 sensors (for example light sensor )
only for PNP sensor
connection example see photo
In stock
Philips Nyquist PC20 output module OM23 9465 070 05201 946507005201 16DO 24V 0,5A
In stock
Philips Nyquist PC20 input module IM22 9465 070 03111 9465 070 03111 32DI 24V
In stock
Philips Nyquist PC20 serial interface RS449/423 VI21/1
In stock
Pilz 630304 cable with plug M12 4-pin 5m yellow PUR for safety switch PSEN
In stock
Safety relay (standalone), inputs: 2-channel wiring with detection of shorts across contacts, outputs: 2 N/O, 1 SC, manualstart, UB = 24 V DC, width: 22.5 mm, spring-loaded terminals not plug-in, safety relay for evaluating sensors with 2 SC outputs, compact height.
In stock
Rittal Optipanel CP6382.009 for Siemens KP1500 Comfort 6AV2124-1QC02-0AX1 control cabinet with handle 6385.010
some cosmetical scratches on the front and back cover, but in overall as new condition
In stock
Conductor Multi-Conductor Cable Violet 24 AWG 328.1'
price per m
In stock
Auxiliary switch on the front, 2 NO + 2 NC Current path 1 NO, 1 NC, 1 NC, 1 NO for 3RH and 3RT spring-type terminal 53/54, 61/62, 71/72, 83/84
In stock
SIMATIC S7, MICRO MEMORY CARD FOR S7-300/C7/ET 200, 3.3 V NFLASH, 64 KB
In stock
Continuous light element, yellow, 12-230 V AC/DC, 70 mm diameter, base BA 15d without light element
In stock
power contactor, AC-3 25 A, 11 kW / 400 V 1 NO + 1 NC, 220 V AC, 50 Hz 240 V, 60 Hz, 3-pole, Size S0, Spring-type terminal
In stock
power contactor, AC-3e/AC-3, 9 A, 4 kW / 400 V, 1 NO, 24 V AC, 50 / 60 Hz 3-pole, frame size S00 screw terminal
In stock
Power contactor, AC-3 16 A, 7.5 kW / 400 V 1 NO, 230 V AC, 50/60 Hz 3-pole, Size S00 Spring-type terminals RC element 3RT2916-1CD00 plugged on
In stock
SIMATIC S5, digitaloutput 441-4 Non-isolated Compact design 32 ouputs 24 V DC/0.5 A
In stock
SIMATIC S5, Analog input 466 for S5-90U/-95U/-100U, ET 100U, ET 200U 4 inputs 0 to 10V
In stock
ELECTRONIC PART FOR PRINTER INTERFACE RS 232/TTY INTERFACE FOR T2240/T2340
In stock
SIMATIC S5, Digital output 441 Non-isolated for S5-90U/-95U/-100U, ET 100U, ET 200U 8 outputs 24 V DC, 0.5 A
In stock
SIMATIC S5, IP 242A Counter module for detection and Pre-processing fast counter pulses, for S5-115U/-135U/-155U
In stock
SIMATIC S7-300, DIGITAL INPUT SM 321, OPTICALLY ISOLATED, 16DI, 24 V DC, 1 X 20 PIN
In stock
SIMATIC S7-300 CPU 315-2 PN/DP, CENTRAL PROCESSING UNIT WITH 384 KBYTE WORKING MEMORY, 1. INTERFACE MPI/DP 12MBIT/S, 2. INTERFACE ETHERNET PROFINET, WITH 2 PORT SWITCH, MICRO MEMORY CARD NECESSARY
In stock
SIMATIC DP, 5 ELECTRON. MODULES FOR ET 200S, 2 DO HIGH FEATURE 24V DC, 15 MM WIDTH DIAGNOSIS F. SHORT-CIRCUIT AND OPEN-CIRCUIT, FIRST-UP SIGNAL WITH LED SF (GROUP FAULT), 5 PIECES PER PACKAGING UNIT
Items 1 - 40 of 47