Items 41 - 60 of 515
16-channel digital output terminal 24 V DC, 0.5 A, 1-wire system
16-channel digital output terminal 24 V DC, 0.5 A, 1-wire system
Potential supply terminal, TwinSAFE Logic, 24 V DC, 10 A, 4 safe inputs, 1 safe output
4-channel analog input terminal 0…20 mA, differential input, 16 bit
License key EtherCAT Terminal for TwinCAT 3.1 (with factory-installed licences)
IO-Link terminal
Potential distribution terminal, 4 x 24 V DC, 4 x 0 V DC
AS interface potential feed terminal with filter
PROFIsafe segment end terminal
EtherCAT Box mit ID-Switch
EtherCAT P Box, industrial housing, 4 digital inputs 24 V DC, 3.0 ms, 4 digital outputs 24 V DC, Imax = 0.5 A, 8 x M8; I/O connection with connector: M8, screw-type
EtherCAT P cable, PUR, flex, M8, plug, straight, male, 4-pin, P-coded – M8, plug, straight, male, 4-pin, P-coded, 3.00 m
EtherCAT P cable, PUR, flex, M8, plug, straight, male, 4-pin, P-coded – M8, plug, straight, male, 4-pin, P-coded, 5.00 m
EtherCAT P cable, PUR, flex, M8, plug, straight, male, 4-pin, P-coded – M8, plug, straight, male, 4-pin, P-coded, 8.00 m
8-channel digital input terminals 24 V DC
The CB1050 is a computer motherboard for industrial applications. Complying to the ATX form factor, it is
equipped with an mPGA479M socket which can accomodate Intel® CPUs of the Celeron® M and
Pentium® M types. With its two DIMM184 sockets memory can be added up to 2 GByte (DDR-333 max.).
Expansion cards can be added into six PCI slots and one AGP slot. The CB1050 also offers a wide range
of internal and external connectors, such as four serial ports, two LAN connectors, six USB channels, two
IDE connectors, digital and analogue audio, CRT/LCD connector etc.
The CB1050 is a computer motherboard for industrial applications. Complying to the ATX form factor, it is
equipped with an mPGA479M socket which can accomodate Intel® CPUs of the Celeron® M and
Pentium® M types. With its two DIMM184 sockets memory can be added up to 2 GByte (DDR-333 max.).
Expansion cards can be added into six PCI slots and one AGP slot. The CB1050 also offers a wide range
of internal and external connectors, such as four serial ports, two LAN connectors, six USB channels, two
IDE connectors, digital and analogue audio, CRT/LCD connector etc.
Multi-touch Control Panel CP39xx-0010 with CP-Link 4 – The One Cable Display Link, 12.1-inch display 1280 x 800, Display only, multi-finger touch screen with CP-Link 4
external braking resistor, 10 Ohm, 100 W, for EL9576 brake chopper terminal and for KL9570 Bus Terminal
highly flexible, drag-chain suitable cable with 5 mio. bending cycles, max. 240 m/min, max. 30 m/s²,
min. bending radius = 89 mm (7 x OD), max. drag-chain length horizontal 20 m, vertical 5 m,
(4 x 1.5 mm² + (2 x 0.75 mm²) + (2 x AWG22)), from 25 m motor choke required
The cable is UL and CSA listed.
xxxx = ordering indication of the length of the motor cable in decimetres
Items 41 - 60 of 515