Items 61 - 80 of 518
EtherCAT P cable, PUR, flex, M8, plug, straight, male, 4-pin, P-coded – M8, plug, straight, male, 4-pin, P-coded, 5.00 m
EtherCAT P cable, PUR, flex, M8, plug, straight, male, 4-pin, P-coded – M8, plug, straight, male, 4-pin, P-coded, 8.00 m
8-channel digital input terminals 24 V DC
The CB1050 is a computer motherboard for industrial applications. Complying to the ATX form factor, it is
equipped with an mPGA479M socket which can accomodate Intel® CPUs of the Celeron® M and
Pentium® M types. With its two DIMM184 sockets memory can be added up to 2 GByte (DDR-333 max.).
Expansion cards can be added into six PCI slots and one AGP slot. The CB1050 also offers a wide range
of internal and external connectors, such as four serial ports, two LAN connectors, six USB channels, two
IDE connectors, digital and analogue audio, CRT/LCD connector etc.
The CB1050 is a computer motherboard for industrial applications. Complying to the ATX form factor, it is
equipped with an mPGA479M socket which can accomodate Intel® CPUs of the Celeron® M and
Pentium® M types. With its two DIMM184 sockets memory can be added up to 2 GByte (DDR-333 max.).
Expansion cards can be added into six PCI slots and one AGP slot. The CB1050 also offers a wide range
of internal and external connectors, such as four serial ports, two LAN connectors, six USB channels, two
IDE connectors, digital and analogue audio, CRT/LCD connector etc.
Multi-touch Control Panel CP39xx-0010 with CP-Link 4 – The One Cable Display Link, 12.1-inch display 1280 x 800, Display only, multi-finger touch screen with CP-Link 4
external braking resistor, 10 Ohm, 100 W, for EL9576 brake chopper terminal and for KL9570 Bus Terminal
highly flexible, drag-chain suitable cable with 5 mio. bending cycles, max. 240 m/min, max. 30 m/s²,
min. bending radius = 89 mm (7 x OD), max. drag-chain length horizontal 20 m, vertical 5 m,
(4 x 1.5 mm² + (2 x 0.75 mm²) + (2 x AWG22)), from 25 m motor choke required
The cable is UL and CSA listed.
xxxx = ordering indication of the length of the motor cable in decimetres
highly flexible, drag-chain suitable cable with 5 mio. bending cycles, max. 240 m/min, max. 30 m/s²,
min. bending radius = 81 mm (7 x OD), max. drag-chain length horizontal 20 m, vertical 5 m,
(4 x 1 mm² + (2 x 0.75 mm²) + (2 x AWG22)), from 25 m motor choke required
The cable is UL and CSA listed.
xxxx = ordering indication of the length of the motor cable in decimetres
highly flexible, drag-chain suitable cable with 5 million bending cycles, max. 240 m/min, max. 30 m/s²,
min. bending radius = 81 mm (7 x OD), max. drag-chain length horizontal 20 m, vertical 5 m,
(4 x 1 mm² + (2 x 0.75 mm²) + (2 x AWG22))
The cable is UL and CSA listed.
xxxx = ordering indication of the length of the motor cable in decimetres
EtherCAT-P-Leitung, PUR, flex, M8, Stecker, gerade, Stift, 4‑polig, P‑kodiert – M8, Stecker, gerade, Stift, 4‑polig, P-kodiert, 3,50 m
MULTI digital output module 24 transistor outputs 24 VDC, 0.5 A
MULTI digital input module 24 inputs 24 VDC, 10 msec, sink 2 electrically isolated input groups
MULTI application memory For type B CPUs and PPs 128 KB EPROM for 42 KB instructions and 34 KB system module
MULTI expansion receiver module For connection of an expansion rack to the main rack Can be used in MULTI module racks
Expansion cable for connecting an expansion rack to the main rack Length 0.5 m
MULTI expansion sender module For connection of up to 3 expansion racks Can be used in MULTI module racks
Bernecker & Rainer ECINT1-11 interface converter RS232 RS485 RS422 B&R
MULTI power supply module 24 VDC, 100 W With extended diagnostics functions Can be used in MULTI/MIDI module racks
MULTI power supply module 240 VAC, 100 W With extended diagnostics functions Can be used in MULTI/MIDI module racks
Items 61 - 80 of 518