Siemens
Siemens
Items 81 - 95 of 95
New sealed
New surplus
Defective
used - cosmetical damage see photos
bus plug
holding clamps
supply plug
as shown on photo
12 months from delivery to the buyer
Reset all filters
In stock
SIMATIC ET 200SP, digital input module, DI 8x 24 V DC Standard, suitable for BU type A0, Color code CC01, Module diagnostics
In stock
SIMATIC ET 200SP, Digital output module, DQ 8x 24V DC/0,5A Standard, Source output (PNP,P-switching) Packing unit: 1 piece, fits to BU-type A0, Colour Code CC02, substitute value output, module diagnostics for: short-circuit to L+ and ground, wire break, supply voltage
In stock
SIMATIC ET 200SP, Digital output module, DQ 8x 24V DC/0,5A Standard, Source output (PNP,P-switching) Packing unit: 1 piece, fits to BU-type A0, Colour Code CC02, substitute value output, module diagnostics for: short-circuit to L+ and ground, wire break, supply voltage
In stock
SIMATIC S7-1500, digital output module DQ16x24 V DC/0.5A HF; 16 channels in groups of 8; 4 A per group; single-channel diagnostics; substitute value: switching cycle counter for connected actuators. the module supports the safety-oriented shutdown of load groups up to SIL2 according to EN IEC 62061:2021 and Category 3 / PL d according to EN ISO 13849-1:2015. front connector (screw terminals or push-in) to be ordered separately
In stock
SIMATIC S7-200, CPU 224, COMPACT UNIT, AC POWER SUPPLY 14 DI DC/10 DO, RELAY, 8/12 KB CODE/8 KB DATA, PROFIBUS DP EXTENDABLE
In stock
SINAMICS S120 Smart Line Module Input: 3AC 380-480V, 50/60Hz Output: DC 600V, 27A, 16kW Design: booksize internal air cooling incl. DRIVE-CLiQ cable
In stock
SINAMICS G120 Control Unit CU230P-2 DP integriert PROFIBUS-DP 6 DI, 3 DO, 4 AI, 2 AO 1 Motortemperatur- Sensor-Eingang 2 PSU-out (DC 10V, DC 24V) 1 PSU-in (DC 24V) USB-und MMC-Interface Schutzart IP20
In stock
SINAMICS Power Module PM240-2 with integrated class A filter with integrated brake chopper 3AC380-480V+10/-10% 47-63Hz power high overload: 0.75kW at 200% 3S, 150% 57S, 100% 240S; Ambient temperature -10 to +50°C; Low overload power: 1.1kW at 150% 3S, 110% 57S, 100% 240S; Ambient temperature -10 to +40°C 196x 73x 165 (HxWxD), FSA protection class IP20 without control unit and operating unit released from CU firmware version V4.6
In stock
SINAMICS Power Module PM240-2 with integrated class A filter with integrated brake chopper 3AC380-480V+10/-10% 47-63Hz power high overload: 0.37kW at 200% 3S, 150% 57S, 100% 240S; Ambient temperature -10 to +50°C; Low overload power: 0.55kW at 150% 3S, 110% 57S, 100% 240S; Ambient temperature -10 to +40°C 196x 73x 165 (HxWxD), FSA protection class IP20 without control unit and operating unit released from CU firmware version V4.6
In stock
SINAMICS S120 Single Motor-Module Eingang: DC 600V Ausgang: 3AC 400V, 5A Bauform: booksize D-Typ interne Luftkühlung optimierte Pulsmuster und Unterstützung der extended Safety integrated Funktionen inkl. DRIVE-CLiQ Leitung
In stock
SIRIUS Sanftstarter S0 25 A, 11 kW/400 V, 40 °C AC 200-480 V, AC/DC 24 V Schraubklemmen
In stock
LED module with integrated LED 24 V AC/DC, red, Spring-loaded terminal, for front plate mounting
In stock
SIRIUS Sanftstarter S0 32 A, 15 kW/400 V, 40 °C AC 200-480 V, AC/DC 24 V Schraubklemmen
In stock
Digital monitoring relay for voltage monitoring, 22.5 mm, 0.1-60 V AC/DC over- and under-voltage detection. Supply voltage: AC/DC 24 V DC and AC 50 to 60 Hz, without galvanic isolation from the measuring circuit. Peak delay 0.1 to 20 s. Hysteresis 0.1 to 30 V. 1 changeover contact with or without fault memory. Screw terminals.
In stock
SIMATIC DP, 5 Universal-Terminalmodule TM-E15C26-A1 für ET 200S für Elektronikmodule 15mm Baubr., Federzugklemmen, 2x6 Klemmenanschlüsse mit Klemmenzugriff auf AUX1, AUX1 durchgezogen 5 Stück je Verpackungseinheit
Items 81 - 95 of 95