Siemens
Siemens
Items 201 - 220 of 687
In stock
Wendestarter, 3RM1, 500 V, 0 - 0,12 kW, 0,1 - 0,5 A, DC 24 V, Schraubanschluss
In stock
SIMATIC DP, Electronic modules for ET 200 PRO 4 DO 24 V DC, 2.0A High Feature, Channel diagnostics, short-circuit and wire break, incl. bus module,
In stock
SIMATIC DP, Electronics module f. ET200SP, F-RQ 1x 24 V DC/24..230VAC/5A ST, 20 mm overall width, 1 relay output (2 NO) Summation output current 5 A, load voltage 24 V DC and 24.. 230 V AC, Can be used up to PL E (ISO 13849-1: 2008)/ SIL 3 (IEC 61508: 2010) if control takes place by (e.g. 6ES7136-6DB00-0CA0) F-DQ
In stock
Siemens 3RG7200-3CC00 Neuware (Überschussbestand)
In stock
Siemens 3RG7201-3CC00 Neu, unbenutzt
In stock
circuit breaker VL160N without Electronic Trip Unit standard breaking ...
In stock
Siemens 4AM5260-3AB VDE08550 Trafo 480V 420V 380V / 230V 400V Gebraucht
In stock
Circuit breaker size S0 for system protection without phase failure protection, A-release 18...25 A, N-release 325 A, screw terminals, standard breaking capacity
In stock
Siemens RAK-TW.1200B-H
Temperature monitor, 40...120 °C, protective tube 100 mm
In stock
SIMATIC DP, electronics module for ET 200S, 2/4 AI RTD Standard, 15mm form factor, 15 bits + VZ Pt100 STD; Pt100 KL; NI100 STD; NI100 KL; 150 Ohm; 300 Ohm; 600 Ohm; cycle time 110ms/channel with LED SF (collective fault)
In stock
CIRCUIT BREAKER. SCREW-TYPE. 75 A
In stock
Digital monitoring relay for voltage monitoring, 22.5 mm, 0.1-60 V AC/DC over- and under-voltage detection. Supply voltage: AC/DC 24 V DC and AC 50 to 60 Hz, without galvanic isolation from the measuring circuit. Peak delay 0.1 to 20 s. Hysteresis 0.1 to 30 V. 1 changeover contact with or without fault memory. Screw terminals.
In stock
Signal cable assembled type: 6FX5002-2DC10 (SINAMICS Drive CLiQ) plug IP20/IP67, with 24V MOTION-CONNECT 500 length (m) = +0 +10 +1 +0
In stock
Power cable assembled type 6FX5002-5CN06 4x 1.5 C, Speed-connect size. 1 for SINAMICS S120 booksize motor modules C-/D-Types MOTION-CONNECT 500 UL/CSA, DESINA Dmax=8.4mm Length (m)= +0 +0 +8 +0
In stock
SIMATIC S7-300, Analog input SM 331, isolated, 8 AI, Resolution 9/12/14 bits, U/I/thermocouple/resistor, alarm, diagnostics, 1x 20-pole Removing/inserting with active backplane bus
In stock
Siemens Simatic S7 ET200B Digital IN 6ES7 131-0BL00-0XB0 6ES7131-0BL00-0XB0
In stock
SIMATIC ET 200SP, digital input module, DI 8x 24 V DC Standard, suitable for BU type A0, Color code CC01, Module diagnostics
In stock
SIMATIC S7-300,INTERFACE MODULE IM 361 IN EXPANSION RACK FOR CONNECTING TO CENTRAL RACK (IM360),24 V DC SUPPLY VOLTAGE, WITH K-BUS
In stock
Communications processor CP 342-5 for connection of SIMATIC S7-300 to PROFIBUS DP, S5-compatible, PG/OP and S7 communication
defective: bus error;
In stock
SIMATIC ET 200SP, digital output module, DQ 4x 24VDC/2A Standard, suitable for BU type A0, Color code CC02, Module diagnostics
Items 201 - 220 of 687