Siemens
Siemens
Items 201 - 250 of 274
New sealed
New surplus
Used
Defective
bus plug
holding clamps
supply plug
memory card
as shown on photo
Reset all filters
In stock
Siemens 6es5951-7NB12 PLC power supply-used, top condition!
In stock
Signal cable assembled type: 6FX5002-2DC10 (SINAMICS Drive CLiQ) connector IP20/IP67, with 24V MOTION-CONNECT 500 length (m) = +0 +0 +8 +0
In stock
SITOP PSU300S 20 A Regulated power supply Input: 3 AC 400-500 V Output: DC 24 V/20 A
In stock
SINAMICS braking resistor R=370Ohm P_Duration=75W P_max=1500W/12s/5% ED stand-alone
In stock
Power cable assembled type 6FX5002-5CN06 4x 1.5 C, Speed-connect size. 1 for SINAMICS S120 booksize motor modules C-/D-Types MOTION-CONNECT 500 UL/CSA, DESINA Dmax=8.4mm Length (m)= +0 +0 +8 +0
In stock
SIMATIC ET 200SP, digital input module, DI 8x 24 V DC Standard, suitable for BU type A0, Color code CC01, Module diagnostics
In stock
Digital monitoring relay for voltage monitoring, 22.5 mm, 0.1-60 V AC/DC over- and under-voltage detection. Supply voltage: AC/DC 24 V DC and AC 50 to 60 Hz, without galvanic isolation from the measuring circuit. Peak delay 0.1 to 20 s. Hysteresis 0.1 to 30 V. 1 changeover contact with or without fault memory. Screw terminals.
In stock
ET 200pro DSE ST Direktstarter Standard mechanisch schaltend elektronischer Überlastschutz AC-3, 0,9 kW / 400 V 0,15 A...2,00 A ohne Bremskontakt Han Q4/2 - Han Q8/0
In stock
Siemens 3RV1042-4JB10 motor protection switch, robust & compact, for safe operation & overload protection, simple assembly, up to 36a. Ideal for industrial plants.
In stock
SIMATIC S7-300 GEREGELTE STROMVERSORGUNG PS307 EINGANG: AC 120/230 V AUSGANG: DC 24 V/10 A
In stock
SIMATIC S7, Micro Memory Card f. S7-300/C7/ET 200S IM151 CPU, 3,3V Nflash, 128 KByte
In stock
Power cable assembled type 6FX5002-5CN06 4x 1.5 C, Speed-connect size. 1 for SINAMICS S120 booksize motor modules C-/D-Types MOTION-CONNECT 500 UL/CSA, DESINA Dmax=8.4mm Length (m)= +0 +20 +0 +0
In stock
Siemens 6GK1901-1BB20-2AB0: Hochwertiger IE FC RJ45 Steckverbinder 180°, CAT 6, für industrielle Ethernet-Verbindungen, robustes Metallgehäuse, einfache Montage.
In stock
SIPLUS LOGO! Front panel installation kit 8TE for LOGO!+SIPLUS extreme with buttons, -40…+70°C,
In stock
Power contactor, AC-3 17 A, 7.5 kW / 400 V AC 110 V, 50 / 60 Hz 3-pole, size S0 spring-loaded connection !!! Discontinued product!!! The successor is SIRIUS 3RT2. The preferred successor type is >>3RT2018-2AF01<<
In stock
SIMATIC S7, TD 100C text display for S7-200, 4 lines, with installation accessories, configuration with STEP 7-Micro/WIN
In stock
SIRIUS safety switching device output extension 4RO with relay release circuits 4 NO contacts plus relay signaling circuit 1 NC contact Us = 24 V AC spring-loaded connection (push-in)
In stock
Compact Switch Module CSM 1277 for connecting SIMATIC S7-1200 and up to 3 further nodes to Industrial Ethernet with 10/100 Mbit/s, unmanaged switch, 4 RJ45 ports, ext. 24 V DC power supply LED diagnostics, S7-1200 module incl. electronic Equipment Manual on CD-ROM
In stock
Accessories for switches 3KA5040, 3KA5140, 3KA52, 3KA53 3KL5040, 3KL52, 3KL53 3KM52, 3KM53 Handle, black, 62mm long with shaft 8x 8mm
In stock
Signal cable assembled (absolute encoder in the motor) 3x 2x 0.14+4x 0.14+2x0.5+4x 0.23 C UL/CSA, DESINA MOTION-CONNECT 500 Dmax=9.9mm Type: 6FX5002-2EQ10 Length (m)= +0 +10 +5 +0
In stock
Drive-CLiQ cable type: 6FX5002-2DC30 assembled for direct measuring systems with 24V RJ45 connector, IP20 and M12 mating connector, IP67 MOTION-CONNECT 500 UL/CSA, DESINA Dmax=7.1mm Length (m)=8
In stock
Siemens 6GK7343-1GX11-0XE0: CP 343-1 Communication processor for SIMATIC S7-300, Ethernet TCP/IP, MPI, RJ45, S7-Comm., Fetch/Write, Diagnosis.
In stock
Power contactor, AC-3 95 A, 45 kW / 400 V 230 V AC, 50 Hz, 2 NO + 2 NC 3-pole, Size S3 Screw terminal
In stock
Siemens 6es7222-1BH32-0XB0 SPS module NEW without OVP
In stock
SINAMICS V20 1AC 200-240V -10/+10% 47-63Hz nominal power 0.25kW with 150% overload for 60 seconds integrated filter C1 I/O: 4 DI, 2 DO,2 AI, 1 AO Fieldbus: USS/MODBUS RTU with built-in BOP protection: IP20/ UL open Size: AA 68x142x108 (WxHxD)
In stock
SIMATIC HMI Anschluss-Box kompakt für Mobile Panels, Einbau in Schaltschrank, PROFINET und PROFIsafe, Anschluss Sicherheitsrelais, Anschlusspunkt-Erkennung
In stock
Power cable assembled type 6FX5002-5CN06 4x 1.5 C, Speed-connect size. 1 for SINAMICS S120 booksize motor modules C-/D-Types MOTION-CONNECT 500 UL/CSA, DESINA Dmax=8.4mm Length (m)= +0 +0 +8 +0
In stock
SIMATIC S7-300, digital input SM 321, isolated 16DE, DC 24V, M-reading, 1x 20-pin
In stock
SIMATIC S7-300, Digital output SM 322, isolated, 8 DO, 24 V DC, 2A, 1x 20-pole
In stock
Siemens 6es7216-2AD21-0XB0 S7-200 PLC CPU used
In stock
Power contactor, AC-3e/AC-3, 25 A, 11 kW / 400 V, 3-pole, DC 24 V, auxiliary contacts: 1 NO + 1 NC, screw terminal, size: S0
In stock
SINAMICS Power Module PM240-2 with integrated Class A filter and integrated brake chopper, 3AC 380-480V +10/-10%, 47-63Hz. High overload power: 0.55kW at 200% for 3s, 150% for 57s, 100% for 240s; ambient temperature -10 to +50°C; low overload power: 0.75kW at 150% for 3s, 110% for 57s, 100% for 240s; ambient temperature -10 to +40°C. Dimensions: 196 x 73 x 165 mm (H x W x D). FSA protection class IP20. Released from CU firmware version V4.6 without control unit and operator panel.
In stock
3-pole circuit breaker for system protection IR= 100...125A, ICU= 70KA/415V with overcurrent release on neutral release 625...1250A, fixed installation without auxiliary release, without auxiliary current and alarm switch
In stock
Power cable assembled type 6FX5002-5CN06 4x 1.5 C, Speed-connect size. 1 for SINAMICS S120 booksize motor modules C-/D-Types MOTION-CONNECT 500 UL/CSA, DESINA Dmax=8.4mm Length (m)= +0 +10 +0 +0
In stock
Power cable assembled Type 6FX5002-5DN06 4x 1.5 (2x1.5) C C plug Speed-connect size. 1 for SINAMICS S120 booksize motor modules C-/D-Types MOTION-CONNECT 500 UL/CSA, DESINA Dmax=10.8mm Length (m)= +0 +0 +8 +0
In stock
SIMATIC S7-300, dummy module DM 370, Dummy module Use for module replacement
In stock
Power cable assembled type 6FX5002-5CN06 4x 1.5 C, Speed-connect size. 1 for SINAMICS S120 booksize motor modules C-/D-Types MOTION-CONNECT 500 UL/CSA, DESINA Dmax=8.4mm Length (m)= +0 +20 +0 +0
In stock
SIMATIC S7-1500, digital output module DQ16x24 V DC/0.5A HF; 16 channels in groups of 8; 4 A per group; single-channel diagnostics; substitute value: switching cycle counter for connected actuators. the module supports the safety-oriented shutdown of load groups up to SIL2 according to EN IEC 62061:2021 and Category 3 / PL d according to EN ISO 13849-1:2015. front connector (screw terminals or push-in) to be ordered separately
In stock
SINAMICS Power Module PM240-2 with integrated class A filter with integrated brake chopper 3AC380-480V+10/-10% 47-63Hz power high overload: 0.37kW at 200% 3S, 150% 57S, 100% 240S; Ambient temperature -10 to +50°C; Low overload power: 0.55kW at 150% 3S, 110% 57S, 100% 240S; Ambient temperature -10 to +40°C 196x 73x 165 (HxWxD), FSA protection class IP20 without control unit and operating unit released from CU firmware version V4.6
In stock
SIMATIC S7, TD 200 TEXT DISPLAY FOR S7-200, 2 LINES WITH CABLE (2.5M)
In stock
Direct Starter High Feature; electronically switching; electronic overload protection up to 4kW / 400V; Setting range 2.8 .. 9A; PROFIenergy; Option: 3DI/LC module
In stock
SIMATIC S7-200, PROFIBUS-DP slave module, 9.6KB to 12MB, 1 PROFIBUS-DP/MPI interface
In stock
SIMATIC DP, 5 electronic modules for ET 200S, 2 DO High Feature 24 V DC/2 A, 15 mm width, Diagnostics short circuit and wire break, Substitute value output with LED SF (group fault) 5 units per packing unit
In stock
SINAMICS G120 Control Unit CU230P-2 DP integriert PROFIBUS-DP 6 DI, 3 DO, 4 AI, 2 AO 1 Motortemperatur- Sensor-Eingang 2 PSU-out (DC 10V, DC 24V) 1 PSU-in (DC 24V) USB-und MMC-Interface Schutzart IP20
In stock
SIRIUS Sanftstarter S0 25 A, 11 kW/400 V, 40 °C AC 200-480 V, AC/DC 24 V Schraubklemmen
In stock
SINAMICS Power Module PM240-2 with integrated class A filter with integrated brake chopper 3AC380-480V+10/-10% 47-63Hz power high overload: 0.75kW at 200% 3S, 150% 57S, 100% 240S; Ambient temperature -10 to +50°C; Low overload power: 1.1kW at 150% 3S, 110% 57S, 100% 240S; Ambient temperature -10 to +40°C 196x 73x 165 (HxWxD), FSA protection class IP20 without control unit and operating unit released from CU firmware version V4.6
In stock
SIMATIC S7-1200, Digitale E/A SM 1223, 16 DI/16 DO, 16 DI DC 24V, M-/P-lesend, 16 DO, M-schaltend (sinking output), NPN Transistor 0,5A
In stock
SIMATIC S7-1200, analog I/O SM 1234, 4 AI/2 AO, +/-10 V, 14-bit resolution or 0 (4)-20mA, 13-bit resolution
In stock
SIMATIC S7-300, CPU 313C-2 DP Compact CPU with MPI, 16 DI/16 DO, 3 high-speed counters (30 kHz), integrated DP interface, Integr. power supply 24 V DC, work memory 64 KB,
In stock
SIMOVERT Masterdrives Bauform kompakt plus Funkentstörfilter, nach EN 55011, Gruppe 1, Klasse B 3 AC 380-480V, 50/60Hz, 2A mit Netzkommutierungsdrossel Rel. Kurzschlussspannung UK=2% UL-Zulassung
Items 201 - 250 of 274