Siemens
Siemens
Items 221 - 240 of 267
In stock
SIMATIC DP, ELECTRONIC MODULE FOR ET 200S, 1 SI SERIAL INTERFACE ONE CHANNEL, 15MM WIDE RS232/422, 485 ASCII, 3964R
In stock
SIMATIC S7-1500, digital output module DQ16x24 V DC/0.5A HF; 16 channels in groups of 8; 4 A per group; single-channel diagnostics; substitute value: switching cycle counter for connected actuators. the module supports the safety-oriented shutdown of load groups up to SIL2 according to EN IEC 62061:2021 and Category 3 / PL d according to EN ISO 13849-1:2015. front connector (screw terminals or push-in) to be ordered separately
In stock
SIMATIC S7-200, CPU 224, COMPACT UNIT, AC POWER SUPPLY 14 DI DC/10 DO, RELAY, 8/12 KB CODE/8 KB DATA, PROFIBUS DP EXTENDABLE
In stock
SIMATIC S7-300, CPU 313C-2 DP Compact CPU with MPI, 16 DI/16 DO, 3 high-speed counters (30 kHz), integrated DP interface, Integr. power supply 24 V DC, work memory 64 KB,
In stock
Current detection module, setting current 10...100 A, width 55 mm, through-plug transformer
In stock
SIMOVERT Masterdrives Bauform kompakt plus Funkentstörfilter, nach EN 55011, Gruppe 1, Klasse B 3 AC 380-480V, 50/60Hz, 2A mit Netzkommutierungsdrossel Rel. Kurzschlussspannung UK=2% UL-Zulassung
In stock
SIMOVERT Masterdrives Motion Control kompakt plus Umrichtergerät 3 AC 380-480V, 50/60Hz, 1,5A
In stock
SINAMICS S120 Smart Line Module Input: 3AC 380-480V, 50/60Hz Output: DC 600V, 27A, 16kW Design: booksize internal air cooling incl. DRIVE-CLiQ cable
In stock
SINAMICS G120 Control Unit CU230P-2 DP integriert PROFIBUS-DP 6 DI, 3 DO, 4 AI, 2 AO 1 Motortemperatur- Sensor-Eingang 2 PSU-out (DC 10V, DC 24V) 1 PSU-in (DC 24V) USB-und MMC-Interface Schutzart IP20
In stock
SINAMICS Power Module PM240-2 with integrated class A filter with integrated brake chopper 3AC380-480V+10/-10% 47-63Hz power high overload: 0.75kW at 200% 3S, 150% 57S, 100% 240S; Ambient temperature -10 to +50°C; Low overload power: 1.1kW at 150% 3S, 110% 57S, 100% 240S; Ambient temperature -10 to +40°C 196x 73x 165 (HxWxD), FSA protection class IP20 without control unit and operating unit released from CU firmware version V4.6
In stock
SINAMICS Power Module PM240-2 with integrated class A filter with integrated brake chopper 3AC380-480V+10/-10% 47-63Hz power high overload: 0.37kW at 200% 3S, 150% 57S, 100% 240S; Ambient temperature -10 to +50°C; Low overload power: 0.55kW at 150% 3S, 110% 57S, 100% 240S; Ambient temperature -10 to +40°C 196x 73x 165 (HxWxD), FSA protection class IP20 without control unit and operating unit released from CU firmware version V4.6
In stock
SINAMICS Power Module PM240-2 with integrated Class A filter and integrated brake chopper, 3AC 380-480V +10/-10%, 47-63Hz. High overload power: 0.55kW at 200% for 3s, 150% for 57s, 100% for 240s; ambient temperature -10 to +50°C; low overload power: 0.75kW at 150% for 3s, 110% for 57s, 100% for 240s; ambient temperature -10 to +40°C. Dimensions: 196 x 73 x 165 mm (H x W x D). FSA protection class IP20. Released from CU firmware version V4.6 without control unit and operator panel.
In stock
SINAMICS S120 Single Motor-Module Eingang: DC 600V Ausgang: 3AC 400V, 5A Bauform: booksize D-Typ interne Luftkühlung optimierte Pulsmuster und Unterstützung der extended Safety integrated Funktionen inkl. DRIVE-CLiQ Leitung
In stock
SINAMICS V20 1AC 200-240V -10/+10% 47-63Hz nominal power 0.25kW with 150% overload for 60 seconds integrated filter C1 I/O: 4 DI, 2 DO,2 AI, 1 AO Fieldbus: USS/MODBUS RTU with built-in BOP protection: IP20/ UL open Size: AA 68x142x108 (WxHxD)
In stock
CP 1430 TCP TCP communication for SIMATIC
In stock
The Siemens 6FX2003-0AA03 is a high-quality connector, ideal for industrial applications. It offers reliable data transmission and is robust against mechanical stress.
In stock
Power contactor, AC-3 95 A, 45 kW / 400 V 230 V AC, 50 Hz, 2 NO + 2 NC 3-pole, Size S3 Screw terminal
In stock
Power contactor, AC-3 7 A, 3 kW / 400 V 1 NO, 24 V DC 3-pole, Size S00 screw terminal
In stock
Power contactor, AC-3e/AC-3, 7 A, 3 kW / 400 V, 3-pole, DC 24 V, auxiliary contacts: 2 NO + 2 NC, screw terminals, size: S00, non-releasable auxiliary switch
In stock
Circuit breaker size S0 for motor protection, CLASS 10 A-release 18...25 A N-release 325 A screw terminal standard switching capacity
Items 221 - 240 of 267