Siemens
Siemens
Items 151 - 200 of 206
In stock
SINAMICS G120 Control Unit CU230P-2 PN integriert PROFINET 6 DI, 3 DO, 4 AI, 2 AO 1 Motortemperatur- Sensor-Eingang 2 PSU-out (DC 10V, DC 24V) 1 PSU-in (DC 24V) USB-und MMC-Interface Schutzart IP20
In stock
SINAMICS G110 PC INVERTER CONNECTION KIT
In stock
SINAMICS G120C Nennleistung: 1,5kW mit 150% Überlast für 3 Sec. 3AC380-480V+10/-20% 47-63Hz integrierter Filter Klasse A I/O-Interface: 6DI, 2DO, 1AI, 1AO Safe-Torque-Off integriert Feldbus integriert: PROFINET-PN Schutzart IP20/UL Open Typ Größe: FSAA 173x 73x 178 (HxBxT) externe 24V
In stock
SINAMICS G120C rated power 3AC380-480V +10/-20% 47-63Hz low overload: 5,5kW at 150% 3s, 110% 57s, 100% 240s high overload: 4,0kW at 200% 3s, 150% 57s, 100% 240s integrated filter class A external 24V I/O interface: 6DI, 2DO,1AI,1AO, 1Mot_t Safe Torque Off integrated Fieldbus: PROFINET-PN Protection: IP20/ UL OPEN TYPE Size: FSB 196X100X203(HXWXD)
In stock
Siemens Sinamics PM240-2 Power Module 6SL3210-1PB13-0AL0
In stock
SINAMICS Power Module PM240-2 with integrated Class A filter and integrated brake chopper, 3AC 380-480V +10/-10%, 47-63Hz. High overload power: 0.55kW at 200% for 3s, 150% for 57s, 100% for 240s; ambient temperature -10 to +50°C; low overload power: 0.75kW at 150% for 3s, 110% for 57s, 100% for 240s; ambient temperature -10 to +40°C. Dimensions: 196 x 73 x 165 mm (H x W x D). FSA protection class IP20. Released from CU firmware version V4.6 without control unit and operator panel.
In stock
SINAMICS S120 Bedienteil mit Miniaturanzeige BOP 20 2-zeilig, 6 Tasten zur Parametrierung und DIAGNOSE. passend für Control Units CU305, CU310, CU320
In stock
SINAMICS S120 Single Motor-Module Eingang: DC 600V Ausgang: 3AC 400V, 5A Bauform: booksize D-Typ interne Luftkühlung optimierte Pulsmuster und Unterstützung der extended Safety integrated Funktionen inkl. DRIVE-CLiQ Leitung
In stock
SINAMICS V20 200-240V 1AC -10/+10% 47-63Hz rated power 0.37 kW with 150% overload for 60 sec. integrated filter C1 I/O: 4 DI, 2 DO,2 AI, 1 AQ fieldbus: USS/MODBUS RTU with built-in BOP protection: IP20/ UL open size: AA 68x142x108 (WxHxD)
In stock
Overload relay 3.5...5 A for motor protection, size S00, CLASS 10, single installation. Main circuit: spring-loaded terminal. Auxiliary circuit: spring-loaded terminal. Manual/automatic reset.
In stock
Auxiliary switch block, 80 E, 4 NO EN 50011 Screw terminal for contactor relays, 4-pole
In stock
Power contactor, AC-3 32 A, 15 kW / 400 V 1 NO + 1 NC, 24 V AC, 50 Hz 3-pole, size S0 Screw terminal
In stock
Circuit breaker size S0 for motor protection CLASS 10 A-release 0.55...0.80 A N-release 10 A Screw terminal Standard breaking capacity with transverse auxiliary switch 1NO+1NC
In stock
Circuit breaker size S00 for motor protection, CLASS 10 A-release 0.22...0.32 A N-release 4.2 A screw terminal Standard switching capacity
In stock
Circuit breaker size S00 for motor protection, CLASS 10 A release 0.22...0.32 A N release 4.2 A Spring-loaded connection Standard switching capacity
In stock
Circuit breaker size S00 for motor protection, CLASS 10 A-release 0.45...0.63 A N-release 8.2 A screw terminal Standard switching capacity
Top
Circuit breaker size S00 for motor protection, CLASS 10 A-release 0.55...0.8 A N-release 10 A screw terminal Standard switching capacity
In stock
Circuit breaker size S00 for motor protection, CLASS 10 A-release 5.5...8 A N-release 104 A screw terminal Standard switching capacity
In stock
Circuit breaker size S00 for motor protection, CLASS 10 A-release 10...16 A N-release 208 A Spring-type terminal Standard switching capacity
In stock
LED module with integrated LED 24 V AC/DC, red, Spring-loaded terminal, for front plate mounting
In stock
Siemens Sirius Halbleiterschütz, 3RF1211-0JA16
In stock
Circuit breaker size S0 for motor protection CLASS 10 A release 1.4...2 A N release 26 A screw connection Standard switching capacity!!! Discontinued product!!! The successor is SIRIUS 3RV2. The preferred successor type is >>3RV2011-1BA10<<
In stock
Surge suppressor, diode combination, 12 ... 250 V DC, for contactor relays and motor contactors Size S00
In stock
Überspannungsbegrenzer, Diodenkombination mit LED, DC 24 V, für Schütze 3RT2.2
In stock
Überspannungsbegrenzer, RC-Glied, AC 127-240 V, 50/60 Hz, DC 150-250 V, für Schütze 3RT2.3
In stock
UEBERLASTRELAIS FUER EINZELAUFSTELLUNG 0,1...0,16 A, 1S+1 OE
In stock
Connection cable length 0.025 m, flat, for connecting the basic device with expansion modules via the system interface
In stock
Cable connector size S00 Spring-type terminal
In stock
SIMATIC DP, Sealing caps M12 with internal thread, for protection of the PROFIBUS interface X01/DP1 for ET200PRO IM154-8 PN/DP CPU, 5 units per packing unit
In stock
Verschlusskappe für 9-polige Energiebuchsen
In stock
SIMATIC DP, 5 ELECTRON. MODULES FOR ET 200S, 4 DI HIGH FEATURE 24V DC, 15 MM WIDTH WITH PARAM. F. INPUT DELAY DIAGNOSIS F. ENCODER SHORT- CIRCUIT W. LED SF (GROUP FAULT) 5 PIECES PER PACKAGING UNIT
Top
SIMATIC DP, Electronics module ET 200SP, F-DQ 8XDC 24V0.5A PP, 15 mm width, up to PL E (ISO 13849) up to SIL 3 (IEC 61508)
In stock
SIMATIC DP, Electronics module f. ET200SP, F-RQ 1x 24 V DC/24..230VAC/5A ST, 20 mm overall width, 1 relay output (2 NO) Summation output current 5 A, load voltage 24 V DC and 24.. 230 V AC, Can be used up to PL E (ISO 13849-1: 2008)/ SIL 3 (IEC 61508: 2010) if control takes place by (e.g. 6ES7136-6DB00-0CA0) F-DQ
In stock
SIMATIC DP, electronic module for ET 200SP, F-DI 8x 24 V DC HF, 15 mm width, up to PLe (ISO 13849-1)/ SIL3 (IEC 61508)
In stock
SIMATIC DP, Electronics module for ET 200SP, F-DQ 4X24 V DC/2A, 15 mm width, up to PL E (ISO 13849) up to SIL 3 (IEC 61508)
In stock
SIMATIC ET 200SP, ANALOG INPUT MODULE, AI 4XI 2-/4-WIRE STANDARD, PACKING UNIT: 1 PIECE, FITS TO BU-TYPE A0, A1, COLOR CODE CC03, MODULE DIAGNOSIS, 16BIT, +/-0,3%
In stock
SIMATIC ET 200SP, BaseUnit BU15-P16+A10+2D, BU type A0, Push-in terminals, with 10 AUX terminals, New load group, WxH: 15 mmx141 mm
Top
SIMATIC ET 200SP, BaseUnit BU15-P16+A10+2B, BU type A0, Push-in terminals, with 10 AUX terminals, bridged to the left, WxH: 15 mmx141 mm
In stock
SIMATIC ET 200SP, BusAdapter BA 2xRJ45, 2 RJ45 sockets
In stock
SIMATIC ET 200SP, Digital output module, DQ 16x 24V DC/0,5A Standard, Source output (PNP,P-switching) Packing unit: 1 piece, fits to BU-type A0, Colour Code CC00, substitute value output, module diagnostics for: short-circuit to L+ and ground, wire break, supply voltage
In stock
SIMATIC ET 200SP, digital output module, DQ 4x 24VDC/2A Standard, suitable for BU type A0, Color code CC02, Module diagnostics
In stock
SIMATIC ET 200SP, PROFINET interface module IM 155-6PN Basic, Max. 12 I/O modules, 2x integrated RJ45 sockets incl. server module
In stock
SIMATIC ET 200SP, PROFINET interface module IM 155-6PN Basic, Max. 12 I/O modules, 2x integrated RJ45 sockets incl. server module
In stock
SIMATIC ET 200SP, Relay module, RQ NO 4x 120V DC..230VAC/5A ST. 4 normally open contacts, isolated contacts, packing unit: 1 piece, fits to BU-type B0 and B1, Colour Code CC40, substitute value output, module diagnostics for: supply voltage
In stock
SIMATIC HMI connection box Standard for Mobile Panels, wall mounting, PROFINET and PROFIsafe, connection of safety relay, terminal detection, integrated switch
In stock
Industrial Ethernet SOFTNET Security Client V4+HF1 Software for establishing secure IP-based VPN connections from a PC/PG to network segments that are secured by SCALANCE S, SCALANCE M Single license for 1 installation Runtime software, software and electrical. Manual on CD-ROM, software in 2 languages (de, en); HB 5 languages (de, en, fr, sp, it) for Windows 7 Ultimate, Professional (32+64 bit), as well as Windows XP Prof.+SP3 (32 bit)
Top
SIMATIC ET 200SP, Digital input module, DI 8x 24V DC Standard, type 3 (IEC 61131), sink input, (PNP, P-reading), Packing unit: 1 piece, fits to BU-type A0, Colour Code CC01, input delay time 0,05..20ms, module diagnostics for: short-circuit of sensor supply, wire break, supply voltage
Top
SIMATIC S7-1200, CPU 1212C, compact CPU, AC/DC/relay, onboard I/O: 8 DI 24 V DC, 6 DO relay 2 A, 2 AI 0-10 V DC, Power supply: AC 85-264 V AC at 47-63 Hz, Program/data memory 75 KB
Top
SIMATIC S7-1200, Relay output SM 1226, F-DQ 2x RLY 5A, PROFIsafe, 70 mm overall width, up to PL E (ISO 13849-1)/ SIL3 (IEC 61508)
Top
SIMATIC S7-1200F, CPU 1215 FC, compact CPU, DC/DC/DC, 2 PROFINET ports, onboard I/O: 14 DI 24 V DC, 10 DO 24 V DC, 0.5A, 2 AI 0-10 V DC, 2 AO 0-20 mA DC, Power supply: DC 20.4-28.8V DC, Program/data memory 150 KB
Items 151 - 200 of 206