Items 61 - 80 of 168
Power contactor, AC-3 7 A, 3 kW / 400 V 1 NO, 24 V DC 3-pole, Size S00 Spring-type terminal
Contactor relay, 6 NO + 2 NC, 24 V DC, Size S00, spring-type terminal, Removable auxiliary switch
SCHUETZ BAUGROESSE 0 3POLIG AC-3, 4 KW, 400 V / 380 V HILFSSCHALTER 11 (1NO+1NC) WECHSELSTROMBETAETIGUNG AC 230/220V 50HZ, 276/264V 60HZ
SENTRON, measuring device, 7KM PAC4200, LCD, L-L: 690 V, L-N: 400 V, 5 A, 3-phase, Modbus TCP, optional Modbus RTU / PROFINET / PROFIBUS / DI/DO, apparent/active/reactive energy / cos phi, harmonics: 2.-64., THD, class 0.2 acc. to IEC61557-12 or cl. 0.2S acc. to IEC62053-22, wide-range pwr sup. unit AC/DC, screw terminals
Siemens SENTRON 3LD2003-0TK53, Switch disconnector 3LD, emergency switching-off switch, 3- pole, 16A
SENTRON, Switch disconnector 3LD, emergency switching-off switch, 3- pole, Iu: 16 A, operating power / at AC-23 A 400 V: 7.5 kW, front-mounted, rotary operating mechanism, Red / yellow, 4-hole mounting of the handle
SIRIUS safety relay Output expansion 4RO with relay enabling circuits 4 NO contacts plus Relay signaling circuit 1 NC contact Us = 24 V DC screw terminal
MEMORY SUBMODULE FOR OP30 V2.03 W. OPER. SYSTEM IN 256KB EPROM AND 256KB FLASH-EPROM
SIMATIC S5 EPROM PROGRAMMER F. PG 695/AT-COMPATIBLE PCS
SIMATIC DP, 5 ELEKTRONIKMODULE FUER ET 200S, 2 DO HIGH FEATURE DC 24V/0,5A, 15MM BAUBREITE DIAGNOSE KURZSCHLUSS UND DRAHTBRUCH, ERSATZWERTAUSGABE MIT LED SF (SAMMELFEHLER) 5 STUECK JE VERPACKUNGSEINHEIT
SIMATIC DP, 5 electronic modules for ET 200S, 2 DO High Feature 24 V DC/2 A, 15 mm width, Diagnostics short circuit and wire break, Substitute value output with LED SF (group fault) 5 units per packing unit
SIMATIC S7, Safety protector between F and standard modules With redundant ET 200M interface modules, use only with partition
SIMATIC DP, Electronic modules for ET 200 PRO 4 DO 24 V DC, 2.0A High Feature, Channel diagnostics, short-circuit and wire break, incl. bus module,
SIMATIC ET 200SP, CM 4xIO-Link ST Communication module IO-Link Master V1.1
SIMATIC DP, PROFIBUS-DP Interface-Modul IM 154-2 High Feature für ET 200 PRO
SIMATIC ET 200SP, BaseUnit BU15-P16+A0+2B, BU type A0, Push-in terminals, without AUX terminals, bridged to the left, WxH: 15x 117 mm
SIMATIC ET 200SP, BaseUnit BU15-P16+A0+2D, BU type A0, Push-in terminals, without AUX terminals, New load group, WxH: 15x 117 mm
SIMATIC ET 200SP, BaseUnit BU20-P8+A4+0B, BU type F0, Push-in terminals, with 4 AUX terminals, bridged to the left, WxH: 20 mmx117 mm
Communications processor CP 343-1 for connection of SIMATIC S7-300 to Industrial Ethernet over PROFNET IO Controllers, ISO, TCP/IP and UDP, S7 communication, fetch/write, SEND/RECEIVE, with and without RFC1006 Diagnostic add-ons Multicast, chargeable Communication modules, SNMP diagnostics, Initialization via LAN, DHCP, NTP-CPU Sync, 10/100 MBit, only RJ45 connection
SIMATIC HMI KTP900F Mobile, 9.0" TFT display, 800x 480 pixel, 16m colors, key and touch operation, 10 function keys, 1x PROFINET/Industrial Ethernet interface, 1x multimedia card, 1x USB, Key-operated switch, acknowledgement button, 1 emergency stop/stop button configurable from WinCC Comfort V13 SP1
Kommunikationsprozessor CP 1243-7 LTE EU zum Anschluss von SIMATIC S7-1200 an LTE-Netz im Europäischen Frequenzbereich.
Items 61 - 80 of 168