Siemens
Siemens
Items 161 - 180 of 192
In stock
SIMATIC DP, 5 electronic modules for ET 200S, 2 DO High Feature 24 V DC/2 A, 15 mm width, Diagnostics short circuit and wire break, Substitute value output with LED SF (group fault) 5 units per packing unit
In stock
SIMATIC DP, 5 ELEKTRONIKMODULE FUER ET 200S, 4 DO STANDARD DC 24V/0,5A, 15MM BAUBREITE 5 STUECK JE VERPACKUNGSEINHEIT
In stock
SIMATIC S7-300, CP 340 Communications processor with RS232C interface (RS-232-C)
In stock
SIMATIC-DP, 4POTDIS für ET 200 Potentialverteilermodul, 15mm Baubr.
In stock
SIMATIC S7-300, CPU 313C-2 DP Compact CPU with MPI, 16 DI/16 DO, 3 high-speed counters (30 kHz), integrated DP interface, Integr. power supply 24 V DC, work memory 64 KB,
In stock
Elektronikmodul für ET 200S, 8 DO DC 24V/0,5A, 15mm Baubr., 1 Stück je Verpackungseinheit
In stock
SIMATIC S5, CP 544B faster communication proc. for point-to-point connections suitable for use of Special drivers
In stock
SITOP rechargeable battery module 24 V/12 Ah for SITOP DC-USV Module 6 A, 15 A and 40 A
In stock
SITOP 10 A Regulated power supply Input: AC 120/230-500 V Output: DC 24 V/10 A
In stock
SITOP PSU300S 20 A Regulated power supply Input: 3 AC 400-500 V Output: DC 24 V/20 A
In stock
SITOP PSE200U 10 A selectivity module 4-channel Input: DC 24 V/40 A Output: DC 24 V/4x 10 A Threshold adjustable 3-10 A with general signaling contact
In stock
SITOP PSE200U 10 A selectivity module 4-channel Input: DC 24 V/40 A Output: DC 24 V/4x 10 A Threshold adjustable 3-10 A with status message per output
In stock
SIMATIC PN/PN Coupler for deterministic data exchange between max. 4 PN controllers per side, even across network boundaries, transmission of PROFIsafe, I/O, MSI, MSO and data set communication, redundant power supply PN connection via SIMATIC BusAdapter (BA), delivery without BusAdapter
In stock
Siemens 6es7216-2AD21-0XB0 S7-200 PLC CPU used
In stock
SIMATIC S7-200, PROFIBUS-DP slave module, 9.6KB to 12MB, 1 PROFIBUS-DP/MPI interface
In stock
Signal cable assembled type: 6FX5002-2DC10 (SINAMICS Drive CLiQ) connector IP20/IP67, with 24V MOTION-CONNECT 500 length (m) = +0 +0 +5 +0
In stock
SINAMICS G120C Rated power 3AC 380-480 V +10/-20% 47-63 Hz Low overload: 7.5 kW at 150% 3 s, 110% 57 s, 100% 240 s High overload: 5.5 kW at 200% 3 s, 150% 57 s, 100% 240 s Integrated filter class A External 24 V I/O interface: 6 DI, 2 DO, 1 AI, 1 AO, 1Mot_t Safe Torque Off integrated Fieldbus: USS / MODBUS RTU Protection: IP20/ UL unencapsulated Size: FSB 196x100x203(HxWxD)
In stock
Signal cable assembled type: 6FX5002-2DC10 (SINAMICS Drive CLiQ) connector IP20/IP67, with 24V MOTION-CONNECT 500 length (m) = +0 +0 +4 +0
In stock
SINAMICS Power Module PM240-2 with integrated Class A filter and integrated brake chopper, 3AC 380-480V +10/-10%, 47-63Hz. High overload power: 0.55kW at 200% for 3s, 150% for 57s, 100% for 240s; ambient temperature -10 to +50°C; low overload power: 0.75kW at 150% for 3s, 110% for 57s, 100% for 240s; ambient temperature -10 to +40°C. Dimensions: 196 x 73 x 165 mm (H x W x D). FSA protection class IP20. Released from CU firmware version V4.6 without control unit and operator panel.
In stock
SINAMICS V20 1AC 200-240V -10/+10% 47-63Hz nominal power 0.25kW with 150% overload for 60 seconds integrated filter C1 I/O: 4 DI, 2 DO,2 AI, 1 AO Fieldbus: USS/MODBUS RTU with built-in BOP protection: IP20/ UL open Size: AA 68x142x108 (WxHxD)
Items 161 - 180 of 192