Siemens
Siemens
Items 141 - 160 of 189
In stock
SIMATIC S5, CP 544B faster communication proc. for point-to-point connections suitable for use of Special drivers
In stock
Compact Switch Module CSM 1277 for connecting SIMATIC S7-1200 and up to 3 further nodes to Industrial Ethernet with 10/100 Mbit/s, unmanaged switch, 4 RJ45 ports, ext. 24 V DC power supply LED diagnostics, S7-1200 module incl. electronic Equipment Manual on CD-ROM
In stock
SIMATIC S7-1200, analog I/O SM 1234, 4 AI/2 AO, +/-10 V, 14-bit resolution or 0 (4)-20mA, 13-bit resolution
In stock
SIMATIC S7, TD 100C text display for S7-200, 4 lines, with installation accessories, configuration with STEP 7-Micro/WIN
In stock
SIMATIC S7-300, DIGITAL INPUT SM 321, OPTICALLY ISOLATED, 16DI, 24 V DC, 20 PIN
In stock
Siemens Simatic S7 terminal module 6ES7193-4CD30-0AA0 for distributed peripheral devices in automation systems.
In stock
SIMATIC S7, TD 200 TEXT DISPLAY FOR S7-200, 2 LINES WITH CABLE (2.5M)
In stock
SIMATIC S7-300, Digital output SM 322, isolated, 8 DO, 24 V DC, 2A, 1x 20-pole
In stock
SIMATIC DP, 5 ELEKTRONIKMODULE FUER ET 200S, 4 DO STANDARD DC 24V/0,5A, 15MM BAUBREITE 5 STUECK JE VERPACKUNGSEINHEIT
In stock
SIMATIC-DP, 4POTDIS für ET 200 Potentialverteilermodul, 15mm Baubr.
In stock
SIMATIC ET 200SP, Digital output module, DQ 8x 24V DC/0,5A Standard, Source output (PNP,P-switching) Packing unit: 1 piece, fits to BU-type A0, Colour Code CC02, substitute value output, module diagnostics for: short-circuit to L+ and ground, wire break, supply voltage
In stock
SIMATIC S7-300, CP 340 Communications processor with RS232C interface (RS-232-C)
In stock
SIMATIC DP, ELECTRONIC MODULE FOR ET 200S, 1 SI SERIAL INTERFACE ONE CHANNEL, 15MM WIDE RS232/422, 485 ASCII, 3964R
In stock
SIMATIC S7-300, CPU 313C-2 DP Compact CPU with MPI, 16 DI/16 DO, 3 high-speed counters (30 kHz), integrated DP interface, Integr. power supply 24 V DC, work memory 64 KB,
In stock
Current detection module, setting current 10...100 A, width 55 mm, through-plug transformer
In stock
SIMOVERT Masterdrives Bauform kompakt plus Funkentstörfilter, nach EN 55011, Gruppe 1, Klasse B 3 AC 380-480V, 50/60Hz, 2A mit Netzkommutierungsdrossel Rel. Kurzschlussspannung UK=2% UL-Zulassung
In stock
SIMOVERT Masterdrives Motion Control kompakt plus Umrichtergerät 3 AC 380-480V, 50/60Hz, 1,5A
In stock
SINAMICS G120C Rated power 3AC 380-480 V +10/-20% 47-63 Hz Low overload: 7.5 kW at 150% 3 s, 110% 57 s, 100% 240 s High overload: 5.5 kW at 200% 3 s, 150% 57 s, 100% 240 s Integrated filter class A External 24 V I/O interface: 6 DI, 2 DO, 1 AI, 1 AO, 1Mot_t Safe Torque Off integrated Fieldbus: USS / MODBUS RTU Protection: IP20/ UL unencapsulated Size: FSB 196x100x203(HxWxD)
In stock
SINAMICS Power Module PM240-2 with integrated Class A filter and integrated brake chopper, 3AC 380-480V +10/-10%, 47-63Hz. High overload power: 0.55kW at 200% for 3s, 150% for 57s, 100% for 240s; ambient temperature -10 to +50°C; low overload power: 0.75kW at 150% for 3s, 110% for 57s, 100% for 240s; ambient temperature -10 to +40°C. Dimensions: 196 x 73 x 165 mm (H x W x D). FSA protection class IP20. Released from CU firmware version V4.6 without control unit and operator panel.
In stock
SINAMICS V20 1AC 200-240V -10/+10% 47-63Hz nominal power 0.25kW with 150% overload for 60 seconds integrated filter C1 I/O: 4 DI, 2 DO,2 AI, 1 AO Fieldbus: USS/MODBUS RTU with built-in BOP protection: IP20/ UL open Size: AA 68x142x108 (WxHxD)
Items 141 - 160 of 189