Siemens
Siemens
Items 81 - 92 of 92
New surplus
Defective
New No Box
bus plug
holding clamps
memory card
as shown on photo
Reset all filters
In stock
SIMATIC S7-1500, digital output module DQ16x24 V DC/0.5A HF; 16 channels in groups of 8; 4 A per group; single-channel diagnostics; substitute value: switching cycle counter for connected actuators. the module supports the safety-oriented shutdown of load groups up to SIL2 according to EN IEC 62061:2021 and Category 3 / PL d according to EN ISO 13849-1:2015. front connector (screw terminals or push-in) to be ordered separately
In stock
SIMATIC S7-200, CPU 224, COMPACT UNIT, AC POWER SUPPLY 14 DI DC/10 DO, RELAY, 8/12 KB CODE/8 KB DATA, PROFIBUS DP EXTENDABLE
In stock
SINAMICS S120 Smart Line Module Input: 3AC 380-480V, 50/60Hz Output: DC 600V, 27A, 16kW Design: booksize internal air cooling incl. DRIVE-CLiQ cable
In stock
SINAMICS G120 Control Unit CU230P-2 DP integriert PROFIBUS-DP 6 DI, 3 DO, 4 AI, 2 AO 1 Motortemperatur- Sensor-Eingang 2 PSU-out (DC 10V, DC 24V) 1 PSU-in (DC 24V) USB-und MMC-Interface Schutzart IP20
In stock
SINAMICS Power Module PM240-2 with integrated class A filter with integrated brake chopper 3AC380-480V+10/-10% 47-63Hz power high overload: 0.75kW at 200% 3S, 150% 57S, 100% 240S; Ambient temperature -10 to +50°C; Low overload power: 1.1kW at 150% 3S, 110% 57S, 100% 240S; Ambient temperature -10 to +40°C 196x 73x 165 (HxWxD), FSA protection class IP20 without control unit and operating unit released from CU firmware version V4.6
In stock
SINAMICS G120C Rated power 3AC 380-480 V +10/-20% 47-63 Hz Low overload: 7.5 kW at 150% 3 s, 110% 57 s, 100% 240 s High overload: 5.5 kW at 200% 3 s, 150% 57 s, 100% 240 s Integrated filter class A External 24 V I/O interface: 6 DI, 2 DO, 1 AI, 1 AO, 1Mot_t Safe Torque Off integrated Fieldbus: USS / MODBUS RTU Protection: IP20/ UL unencapsulated Size: FSB 196x100x203(HxWxD)
In stock
SINAMICS Power Module PM240-2 with integrated class A filter with integrated brake chopper 3AC380-480V+10/-10% 47-63Hz power high overload: 0.37kW at 200% 3S, 150% 57S, 100% 240S; Ambient temperature -10 to +50°C; Low overload power: 0.55kW at 150% 3S, 110% 57S, 100% 240S; Ambient temperature -10 to +40°C 196x 73x 165 (HxWxD), FSA protection class IP20 without control unit and operating unit released from CU firmware version V4.6
In stock
SINAMICS S120 Single Motor-Module Eingang: DC 600V Ausgang: 3AC 400V, 5A Bauform: booksize D-Typ interne Luftkühlung optimierte Pulsmuster und Unterstützung der extended Safety integrated Funktionen inkl. DRIVE-CLiQ Leitung
In stock
SIRIUS Sanftstarter S0 25 A, 11 kW/400 V, 40 °C AC 200-480 V, AC/DC 24 V Schraubklemmen
In stock
SIRIUS Sanftstarter S0 32 A, 15 kW/400 V, 40 °C AC 200-480 V, AC/DC 24 V Schraubklemmen
In stock
Digital monitoring relay for voltage monitoring, 22.5 mm, 0.1-60 V AC/DC over- and under-voltage detection. Supply voltage: AC/DC 24 V DC and AC 50 to 60 Hz, without galvanic isolation from the measuring circuit. Peak delay 0.1 to 20 s. Hysteresis 0.1 to 30 V. 1 changeover contact with or without fault memory. Screw terminals.
In stock
SIMATIC DP, 5 Universal-Terminalmodule TM-E15C26-A1 für ET 200S für Elektronikmodule 15mm Baubr., Federzugklemmen, 2x6 Klemmenanschlüsse mit Klemmenzugriff auf AUX1, AUX1 durchgezogen 5 Stück je Verpackungseinheit
Items 81 - 92 of 92