Siemens
Siemens
Items 21 - 40 of 334
New surplus
Used
Defective
New No Box
front plug
bus plug
memory card
as shown on photo
Reset all filters
In stock
Siemens 6ES7153-4AA00-0XB0 ist ein ET 200M IM153-4 PN IO-Modul für S7-300, hohe Datenraten, einfache Integration, robustes Design für Industrieautomation.
In stock
ET 200pro DSE ST Direktstarter Standard mechanisch schaltend elektronischer Überlastschutz AC-3, 0,9 kW / 400 V 0,15 A...2,00 A ohne Bremskontakt Han Q4/2 - Han Q8/0
In stock
SIMATIC S5, ZG S5-135U/-155U ZENTRALGERAET, 21 STECKPLAETZE, OHNE CPU, OHNE GERAETEHANDBUCH, M. STROMVERS. AC230/115V;5V,18A
In stock
CP 1430 TCP TCP communication for SIMATIC
In stock
SIRIUS Sanftstarter S0 32 A, 15 kW/400 V, 40 °C AC 200-480 V, AC/DC 24 V Schraubklemmen
In stock
Siemens 6GK5744-1ST00-2AA6 used scalance X244-2 Managed Switch
In stock
SIMATIC S7-300, CPU 313C-2 DP Compact CPU with MPI, 16 DI/16 DO, 3 high-speed counters (30 kHz), integrated DP interface, Integr. power supply 24 V DC, work memory 64 KB,
In stock
SIMOVERT Masterdrives Bauform kompakt plus Funkentstörfilter, nach EN 55011, Gruppe 1, Klasse B 3 AC 380-480V, 50/60Hz, 2A mit Netzkommutierungsdrossel Rel. Kurzschlussspannung UK=2% UL-Zulassung
In stock
SIMATIC S7-1200, analog I/O SM 1234, 4 AI/2 AO, +/-10 V, 14-bit resolution or 0 (4)-20mA, 13-bit resolution
In stock
SIMATIC S7-1200, Digitale E/A SM 1223, 16 DI/16 DO, 16 DI DC 24V, M-/P-lesend, 16 DO, M-schaltend (sinking output), NPN Transistor 0,5A
In stock
SINAMICS Power Module PM240-2 with integrated class A filter with integrated brake chopper 3AC380-480V+10/-10% 47-63Hz power high overload: 0.75kW at 200% 3S, 150% 57S, 100% 240S; Ambient temperature -10 to +50°C; Low overload power: 1.1kW at 150% 3S, 110% 57S, 100% 240S; Ambient temperature -10 to +40°C 196x 73x 165 (HxWxD), FSA protection class IP20 without control unit and operating unit released from CU firmware version V4.6
In stock
SIRIUS Sanftstarter S0 25 A, 11 kW/400 V, 40 °C AC 200-480 V, AC/DC 24 V Schraubklemmen
In stock
SINAMICS G120 Control Unit CU230P-2 DP integriert PROFIBUS-DP 6 DI, 3 DO, 4 AI, 2 AO 1 Motortemperatur- Sensor-Eingang 2 PSU-out (DC 10V, DC 24V) 1 PSU-in (DC 24V) USB-und MMC-Interface Schutzart IP20
In stock
SIMATIC S7-200, PROFIBUS-DP slave module, 9.6KB to 12MB, 1 PROFIBUS-DP/MPI interface
In stock
SIMATIC S7-300, DIGITAL INPUT SM 321, OPTICALLY ISOLATED, 16DI, 24 V DC, 1 X 20 PIN
In stock
SINAMICS Power Module PM240-2 with integrated class A filter with integrated brake chopper 3AC380-480V+10/-10% 47-63Hz power high overload: 0.37kW at 200% 3S, 150% 57S, 100% 240S; Ambient temperature -10 to +50°C; Low overload power: 0.55kW at 150% 3S, 110% 57S, 100% 240S; Ambient temperature -10 to +40°C 196x 73x 165 (HxWxD), FSA protection class IP20 without control unit and operating unit released from CU firmware version V4.6
In stock
SIMATIC S7-1500, digital output module DQ16x24 V DC/0.5A HF; 16 channels in groups of 8; 4 A per group; single-channel diagnostics; substitute value: switching cycle counter for connected actuators. the module supports the safety-oriented shutdown of load groups up to SIL2 according to EN IEC 62061:2021 and Category 3 / PL d according to EN ISO 13849-1:2015. front connector (screw terminals or push-in) to be ordered separately
In stock
Power cable assembled type 6FX5002-5CN06 4x 1.5 C, Speed-connect size. 1 for SINAMICS S120 booksize motor modules C-/D-Types MOTION-CONNECT 500 UL/CSA, DESINA Dmax=8.4mm Length (m)= +0 +20 +0 +0
In stock
3-pole circuit breaker for system protection IR= 100...125A, ICU= 70KA/415V with overcurrent release on neutral release 625...1250A, fixed installation without auxiliary release, without auxiliary current and alarm switch
In stock
Power cable assembled type 6FX5002-5CN06 4x 1.5 C, Speed-connect size. 1 for SINAMICS S120 booksize motor modules C-/D-Types MOTION-CONNECT 500 UL/CSA, DESINA Dmax=8.4mm Length (m)= +0 +10 +0 +0
Items 21 - 40 of 334