Siemens
Siemens
Items 251 - 300 of 327
In stock
SIMOVERT Masterdrives Motion Control kompakt plus Umrichtergerät 3 AC 380-480V, 50/60Hz, 1,5A
In stock
SINAMICS S120 Smart Line Module Input: 3AC 380-480V, 50/60Hz Output: DC 600V, 27A, 16kW Design: booksize internal air cooling incl. DRIVE-CLiQ cable
In stock
SINAMICS G120 Control Unit CU230P-2 DP integriert PROFIBUS-DP 6 DI, 3 DO, 4 AI, 2 AO 1 Motortemperatur- Sensor-Eingang 2 PSU-out (DC 10V, DC 24V) 1 PSU-in (DC 24V) USB-und MMC-Interface Schutzart IP20
In stock
SINAMICS Power Module PM240-2 with integrated class A filter with integrated brake chopper 3AC380-480V+10/-10% 47-63Hz power high overload: 0.75kW at 200% 3S, 150% 57S, 100% 240S; Ambient temperature -10 to +50°C; Low overload power: 1.1kW at 150% 3S, 110% 57S, 100% 240S; Ambient temperature -10 to +40°C 196x 73x 165 (HxWxD), FSA protection class IP20 without control unit and operating unit released from CU firmware version V4.6
In stock
SINAMICS G120C rated power 3AC380-480V +10/-20% 47-63Hz low overload: 5,5kW at 150% 3s, 110% 57s, 100% 240s high overload: 4,0kW at 200% 3s, 150% 57s, 100% 240s integrated filter class A external 24V I/O interface: 6DI, 2DO,1AI,1AO, 1Mot_t Safe Torque Off integrated Fieldbus: PROFINET-PN Protection: IP20/ UL OPEN TYPE Size: FSB 196X100X203(HXWXD)
In stock
SINAMICS Power Module PM240-2 with integrated class A filter with integrated brake chopper 3AC380-480V+10/-10% 47-63Hz power high overload: 0.37kW at 200% 3S, 150% 57S, 100% 240S; Ambient temperature -10 to +50°C; Low overload power: 0.55kW at 150% 3S, 110% 57S, 100% 240S; Ambient temperature -10 to +40°C 196x 73x 165 (HxWxD), FSA protection class IP20 without control unit and operating unit released from CU firmware version V4.6
In stock
SINAMICS Power Module PM240-2 with integrated Class A filter and integrated brake chopper, 3AC 380-480V +10/-10%, 47-63Hz. High overload power: 0.55kW at 200% for 3s, 150% for 57s, 100% for 240s; ambient temperature -10 to +50°C; low overload power: 0.75kW at 150% for 3s, 110% for 57s, 100% for 240s; ambient temperature -10 to +40°C. Dimensions: 196 x 73 x 165 mm (H x W x D). FSA protection class IP20. Released from CU firmware version V4.6 without control unit and operator panel.
In stock
SINAMICS S120 Single Motor-Module Eingang: DC 600V Ausgang: 3AC 400V, 5A Bauform: booksize D-Typ interne Luftkühlung optimierte Pulsmuster und Unterstützung der extended Safety integrated Funktionen inkl. DRIVE-CLiQ Leitung
In stock
SINAMICS V20 1AC 200-240V -10/+10% 47-63Hz nominal power 0.25kW with 150% overload for 60 seconds integrated filter C1 I/O: 4 DI, 2 DO,2 AI, 1 AO Fieldbus: USS/MODBUS RTU with built-in BOP protection: IP20/ UL open Size: AA 68x142x108 (WxHxD)
In stock
The Siemens 6FX2003-0AA03 is a high-quality connector, ideal for industrial applications. It offers reliable data transmission and is robust against mechanical stress.
In stock
Power contactor, AC-3e/AC-3, 7 A, 3 kW / 400 V, 3-pole, DC 24 V, auxiliary contacts: 2 NO + 2 NC, screw terminals, size: S00, non-releasable auxiliary switch
In stock
MSP S0 0.7 - 1A SCREW
In stock
Circuit breaker size S0 for motor protection, CLASS 10 A-release 18...25 A N-release 325 A screw terminal standard switching capacity
In stock
Circuit breaker size S0 for motor protection, CLASS 10 A-release 34...40 A N-release 480 A Screw connection Standard breaking capacity
In stock
Circuit breaker size S3 for motor protection, CLASS 10 A-release 65...84 A N-release 1170 A Screw terminal Standard breaking capacity
In stock
Circuit breaker size S2 for motor protection, CLASS 10 A-release 42...52 A N-release 741 A Screw terminal Standard breaking capacity
In stock
SIRIUS Sanftstarter S0 25 A, 11 kW/400 V, 40 °C AC 200-480 V, AC/DC 24 V Schraubklemmen
In stock
Semiconductor contactor 1-phase 3RF2 AC 15 / 15 A / 40 °C 24-230 V / DC 24 V momentary switching
In stock
CIRCUIT BREAKER. SCREW-TYPE. 75 A
In stock
Circuit breaker size S00 for motor protection, CLASS 10 A-release 9...12.5 A N-release 163 A Screw connection Standard breaking capacity
In stock
Circuit breaker size S0 for motor protection, CLASS 10 A-release 10...16 A N-release 208 A Screw terminal Standard breaking capacity
In stock
Circuit breaker size S00 for motor protection, CLASS 10 A-release 10...16 A N-release 208 A Screw terminal Standard breaking capacity with transverse auxiliary switch 1NO+1NC
In stock
Circuit breaker size S0 for motor protection, CLASS 10 A-release 1.4...2 A N-release 26 A screw terminal standard switching capacity
In stock
Circuit breaker size S0 for motor protection, CLASS 10 A-release 7...10 A N-release 130 A screw connection standard switching capacity
In stock
SIRIUS Sanftstarter S0 32 A, 15 kW/400 V, 40 °C AC 200-480 V, AC/DC 24 V Schraubklemmen
In stock
Digital monitoring relay for voltage monitoring, 22.5 mm, 0.1-60 V AC/DC over- and under-voltage detection. Supply voltage: AC/DC 24 V DC and AC 50 to 60 Hz, without galvanic isolation from the measuring circuit. Peak delay 0.1 to 20 s. Hysteresis 0.1 to 30 V. 1 changeover contact with or without fault memory. Screw terminals.
In stock
SITAS transformer; Phases: 1; Pn/Pn(S6)(kVA): 0.315 / 1.12; Upri(V): 400 +/- 5%; Usec(V): 230; Isec(A): 1.37; F(Hz): 50...60; Switching size/shielding: II0 / 0; TA/Isokl: 40 / B; IP00; Connection: Screw/flat plug connection; Mounting: Screws; EN 61558-2-1, -2-2, -2-4 >UL/CSA-Recognized Control Transformer Isolation Transformer<
In stock
SITOP 10 A Regulated power supply Input: AC 120/230-500 V Output: DC 24 V/10 A
In stock
Siemens SITOP power 10 6EP1334-1SL11 Stromversorgung 6EP1 334-1SL11
In stock
SITOP PSE200U 10 A selectivity module 4-channel Input: DC 24 V/40 A Output: DC 24 V/4x 10 A Threshold adjustable 3-10 A with general signaling contact
In stock
SITOP PSE200U 10 A selectivity module 4-channel Input: DC 24 V/40 A Output: DC 24 V/4x 10 A Threshold adjustable 3-10 A with status message per output
In stock
SITOP POWER SUPPLY PSU200M 10A 230V 24V
In stock
SIMATIC PN/PN Coupler for deterministic data exchange between max. 4 PN controllers per side, even across network boundaries, transmission of PROFIsafe, I/O, MSI, MSO and data set communication, redundant power supply PN connection via SIMATIC BusAdapter (BA), delivery without BusAdapter
In stock
SIWAREX CS WAEGEELEKTRONIK FUER EINE WAAGE, 200S- KOPFSTATION IM 151-1 BASIC/ STANDARD/HIGH FEATURE UND IM 151-7 CPU RS232- SCHNITTSTELLE F. PC-ANSCHLUSS, TTY-SCHNITTSTELLE FUER FERN- ANZEIGER.
In stock
SIWAREX IS EX-BARRIERE F. EIGENSICHEREN ANSCHLUSS VON WAEGEZELLEN, HUTSCHIENENMONTAGE, STANDARD VERSION ZERTIFIZIERT NACH ATEX: (EEX IB) II C ALS ZUGEHOERIGES BETRIEBSMITTEL METROLOGISCHE ZULASSUNG
In stock
Electrical and mechanical link module for 3RV1.2 and 3RT1.2 DC operation (single-unit packaging) !!! Discontinued product !!! Successor is SIRIUS 3RA2. Preferred successor type is >>3RA2921-1BA00<<
In stock
Connector size S00 spring-loaded connection
In stock
*** SPARE PART*** SIMATIC PANEL PC 677 15" KEY, 1024X768; WITH FRONT S...
In stock
The VACON 100 FLOW is a variable speed drive designed to optimize flow control in applications in the water, wastewater, and building automation industries. It combines all the core features of the VACON 100 with application-relevant, purpose-built flow control functions—for example, for multi-pump solutions and application selection menus.
In stock
SIMATIC S7-200, CPU 224XP Compact unit, DC power supply 14 DI DC/10 DO DC, 2 AI, 1 AO, 12/16 KB progr./10 KB data, 2 PPI/user-programmable interface
In stock
SIMATIC DP, 5 universal terminal modules TM-E15C26-A1 for ET 200S for electronic modules 15 mm width, Spring-type terminals, 2x6 terminal connections with terminal access to AUX1, AUX1 continuous 5 units per packing unit
In stock
Siemens Simatic S7 terminal module 6ES7193-4CD30-0AA0 for distributed peripheral devices in automation systems.
In stock
Contact module with 1 contact element, 1 NO, spring-type terminal, for front plate mounting
In stock
Miniature circuit breaker 230/400 V 6kA, 1-pole, B, 10A
In stock
Miniature circuit breaker 230/400 V 6kA, 1-pole, B, 16A
In stock
SIMATIC ET 200SP, digital input module, DI 8x 24 V DC Standard, suitable for BU type A0, Color code CC01, Module diagnostics
In stock
Power contactor, AC-3 95 A, 45 kW / 400 V 230 V AC, 50 Hz, 2 NO + 2 NC 3-pole, Size S3 Screw terminal
In stock
Power contactor, AC-3 7 A, 3 kW / 400 V 1 NO, 24 V DC 3-pole, Size S00 screw terminal
In stock
Compact Switch Module CSM 1277 for connecting SIMATIC S7-1200 and up to 3 further nodes to Industrial Ethernet with 10/100 Mbit/s, unmanaged switch, 4 RJ45 ports, ext. 24 V DC power supply LED diagnostics, S7-1200 module incl. electronic Equipment Manual on CD-ROM
In stock
SIMATIC S7-1200, analog I/O SM 1234, 4 AI/2 AO, +/-10 V, 14-bit resolution or 0 (4)-20mA, 13-bit resolution
Items 251 - 300 of 327