Items 561 - 600 of 677
Compact Switch Module CSM 1277 for connecting SIMATIC S7-1200 and up to 3 further nodes to Industrial Ethernet with 10/100 Mbit/s, unmanaged switch, 4 RJ45 ports, ext. 24 V DC power supply LED diagnostics, S7-1200 module incl. electronic Equipment Manual on CD-ROM
SIMATIC S7-1200, analog I/O SM 1234, 4 AI/2 AO, +/-10 V, 14-bit resolution or 0 (4)-20mA, 13-bit resolution
Siemens SIMATIC S7 1P 6ES7 138-4CA01-0AA0 Gebraucht
SIMATIC S7-300, DIGITAL INPUT SM 321, OPTICALLY ISOLATED, 16DI, 24 V DC, 20 PIN
SIMATIC S7-300, Digital output SM 322, isolated, 16 DO, 24 V DC, 0.5A, 1x 20-pole, Total current 4 A/group (8 A/module)
MODULE OUTPUT S7300 2AO 11/12BITS 20P
Siemens Simatic S7 terminal module 6ES7193-4CD30-0AA0 for distributed peripheral devices in automation systems.
SIMATIC S7-300, Analog input SM 331, isolated, 8 AI, Resolution 9/12/14 bits, U/I/thermocouple/resistor, alarm, diagnostics, 1x 20-pole Removing/inserting with active backplane bus
SIMATIC_BUSADAPTER_PN_BA_2XRJ45
SIMATIC DP, 5 ELEKTRONIKMODULE FUER ET 200S, 4 DO STANDARD DC 24V/0,5A, 15MM BAUBREITE 5 STUECK JE VERPACKUNGSEINHEIT
SIMATIC-DP, 4POTDIS für ET 200 Potentialverteilermodul, 15mm Baubr.
SIMATIC S7-300, CP 340 Communications processor with RS232C interface (RS-232-C)
SIMATIC S7-300, dummy module DM 370, Dummy module Use for module replacement
SIMATIC DP, ELECTRONIC MODULE FOR ET 200S, 1 SI SERIAL INTERFACE ONE CHANNEL, 15MM WIDE RS232/422, 485 ASCII, 3964R
Current detection module, setting current 10...100 A, width 55 mm, through-plug transformer
SIMOVERT Masterdrives Bauform kompakt plus Funkentstörfilter, nach EN 55011, Gruppe 1, Klasse B 3 AC 380-480V, 50/60Hz, 2A mit Netzkommutierungsdrossel Rel. Kurzschlussspannung UK=2% UL-Zulassung
SIMOVERT Masterdrives Motion Control kompakt plus Umrichtergerät 3 AC 380-480V, 50/60Hz, 1,5A
SINAMICS Power Module PM240-2 with integrated Class A filter and integrated brake chopper, 3AC 380-480V +10/-10%, 47-63Hz. High overload power: 0.55kW at 200% for 3s, 150% for 57s, 100% for 240s; ambient temperature -10 to +50°C; low overload power: 0.75kW at 150% for 3s, 110% for 57s, 100% for 240s; ambient temperature -10 to +40°C. Dimensions: 196 x 73 x 165 mm (H x W x D). FSA protection class IP20. Released from CU firmware version V4.6 without control unit and operator panel.
SINAMICS V20 1AC 200-240V -10/+10% 47-63Hz nominal power 0.25kW with 150% overload for 60 seconds integrated filter C1 I/O: 4 DI, 2 DO,2 AI, 1 AO Fieldbus: USS/MODBUS RTU with built-in BOP protection: IP20/ UL open Size: AA 68x142x108 (WxHxD)
CP 1430 TCP TCP communication for SIMATIC
The Siemens 6FX2003-0AA03 is a high-quality connector, ideal for industrial applications. It offers reliable data transmission and is robust against mechanical stress.
Power contactor, AC-3 95 A, 45 kW / 400 V 230 V AC, 50 Hz, 2 NO + 2 NC 3-pole, Size S3 Screw terminal
Power contactor, AC-3 7 A, 3 kW / 400 V 1 NO, 24 V DC 3-pole, Size S00 screw terminal
Power contactor, AC-3e/AC-3, 7 A, 3 kW / 400 V, 3-pole, DC 24 V, auxiliary contacts: 2 NO + 2 NC, screw terminals, size: S00, non-releasable auxiliary switch
MSP S0 0.7 - 1A SCREW
Circuit breaker size S0 for motor protection, CLASS 10 A-release 18...25 A N-release 325 A screw terminal standard switching capacity
Circuit breaker size S0 for motor protection, CLASS 10 A-release 34...40 A N-release 480 A Screw connection Standard breaking capacity
Circuit breaker size S3 for motor protection, CLASS 10 A-release 65...84 A N-release 1170 A Screw terminal Standard breaking capacity
Circuit breaker size S2 for motor protection, CLASS 10 A-release 42...52 A N-release 741 A Screw terminal Standard breaking capacity
Contact module with 1 contact element, 1 NO, spring-type terminal, for front plate mounting
Semiconductor contactor 1-phase 3RF2 AC 15 / 15 A / 40 °C 24-230 V / DC 24 V momentary switching
CIRCUIT BREAKER. SCREW-TYPE. 75 A
Circuit breaker size S00 for motor protection, CLASS 10 A-release 9...12.5 A N-release 163 A Screw connection Standard breaking capacity
Circuit breaker size S0 for motor protection, CLASS 10 A-release 10...16 A N-release 208 A Screw terminal Standard breaking capacity
Circuit breaker size S00 for motor protection, CLASS 10 A-release 10...16 A N-release 208 A Screw terminal Standard breaking capacity with transverse auxiliary switch 1NO+1NC
Circuit breaker size S0 for motor protection, CLASS 10 A-release 1.4...2 A N-release 26 A screw terminal standard switching capacity
Circuit breaker size S0 for motor protection, CLASS 10 A-release 7...10 A N-release 130 A screw connection standard switching capacity
SITAS transformer; Phases: 1; Pn/Pn(S6)(kVA): 0.315 / 1.12; Upri(V): 400 +/- 5%; Usec(V): 230; Isec(A): 1.37; F(Hz): 50...60; Switching size/shielding: II0 / 0; TA/Isokl: 40 / B; IP00; Connection: Screw/flat plug connection; Mounting: Screws; EN 61558-2-1, -2-2, -2-4 >UL/CSA-Recognized Control Transformer Isolation Transformer<
SITOP 10 A Regulated power supply Input: AC 120/230-500 V Output: DC 24 V/10 A
Siemens SITOP power 10 6EP1334-1SL11 Stromversorgung 6EP1 334-1SL11
Items 561 - 600 of 677