Beckhoff
Beckhoff implements open automation systems based on PC Control technology.
The product range covers Industrial PCs, I/O and Fieldbus Components, Drive Technology and automation software.
Products that can be used as separate components or integrated into a complete and seamless control system
are available for all industries.
The Beckhoff New Automation Technology philosophy represents universal and open control and automation solutions
that are used worldwide in a wide variety of different applications,
ranging from CNC-controlled machine tools to intelligent building automation.
Items 1 - 50 of 84
In stock
Up/down counter 24 V DC, 1 kHz, 32 bit counter depth
In stock
TwinSAFE Logic, safety protocol: TwinSAFE/Safety over EtherCAT
In stock
SERCOS interface Bus Coupler for up to 64 Bus Terminals, 2.4 Mbaud
In stock
PROFINET RT controller terminal
In stock
Power supply terminal for E-bus, 24 V DC, 2 A
In stock
Passive potential feed terminal, 24 V DC
In stock
Interface module for 2 x RS232 connections (COM3 + COM4)
– can only be used instead and not simultaneously with system interface CX1010-N041
– full 115 kbaud on both channels
– electrically isolated interfaces (optically isolated)
– pre-assembled ex factory, no field modification possible
– protection class IP 20
– operating/storage temperature 0 °C ... +55 °C/-25 °C ... +85 °C
– weight approx. 80 g
– dimensions (W x H x D) 19 x 100 x 51 mm
In stock
Extension Box, 4 digital inputs 24 V DC, 0.2 ms, 4 digital outputs 24 V DC, Imax = 2 A (? 4 A), M8, I/O connection with connector: M8, 3-pin, screw-type
In stock
EtherCAT/Ethernet cable, PUR, highflex, M8, plug, straight, male, 4-pin, A?coded – M8, plug, straight, male, 4-pin, A-coded, 5.00 m
In stock
EtherCAT/Ethernet cable, PUR, highflex, M8, plug, straight, male, 4-pin, A?coded – M8, plug, straight, male, 4-pin, A-coded, 4.00 m
In stock
EtherCAT/Ethernet cable, PUR, highflex, M8, plug, straight, male, 4-pin, A?coded – M8, plug, straight, male, 4-pin, A-coded, 2.50 m
In stock
EtherCAT/Ethernet cable, PUR, highflex, M8, plug, straight, male, 4-pin, A?coded – M8, plug, straight, male, 4-pin, A-coded, 2.00 m
In stock
EtherCAT/Ethernet cable, PUR, highflex, M8, plug, straight, male, 4-pin, A?coded – M8, plug, straight, male, 4-pin, A-coded, 0.60 m
In stock
EtherCAT/Ethernet cable, PUR, highflex, M8, plug, straight, male, 4-pin, A?coded – M8, plug, straight, male, 4-pin, A-coded, 0.30 m
In stock
EtherCAT/Ethernet cable, PUR, highflex, M8, plug, straight, male, 4-pin, A-coded – M8, plug, straight, male, 4-pin, A-coded, 10.00 m
In stock
EtherCAT P Box, industrial housing, 16-channel digital output 24 V DC, Imax = 0.5 A (? 3 A), 2 x D-sub, 9-pin
In stock
EtherCAT Coupler for E-bus terminals (ELxxxx)
In stock
EtherCAT Box, industrial housing, 8-channel digital input, TwinSAFE, 24 V DC
In stock
DIN rail Industrial PC
– 32 bit, 400 MHz CPU
– 512 MB microSD flash memory (optionally 1 GB, 2 GB, 4 GB or 8 GB)
– 64 MB internal main memory
– protocol: CANopen master, CAN Layer 2 Kommunikation
– operating system: Microsoft Windows Embedded CE 6.0
– programming: TwinCAT 2 PLC
– interfaces: 1 x Ethernet 10/100 Mbit/s (RJ45), 1 x USB device (behind the front flap)
– bus interface: D-sub connector, 9-pin according to CANopen specification, galvanically decoupled
– I/O connection: E-bus (EtherCAT Terminals) or K-bus (Bus Terminals), automatic detection
– clock: internal battery-backed clock for time and date (battery behind the front flap, exchangeable)
– UPS: 1-second UPS (for 1 MB of persistent data)
– protection class: IP 20
– weight approx. 180 g
– dimensions (W x H x D) 64 x 100 x 73 mm
In stock
EtherCAT-/Ethernet-plug M8 female, metall, IP 67, 4-pin, screwed
In stock
EtherCAT-/Ethernet-plug M8, metall, IP 67, 4-pin, screwed
In stock
EtherCAT-P-Leitung, PUR, flex, M8, Stecker, gerade, Stift, 4‑polig, P‑kodiert – M8, Stecker, gerade, Stift, 4‑polig, P-kodiert, 3,50 m
In stock
EtherCAT P cable, PUR, flex, M8, plug, straight, male, 4-pin, P-coded – M8, plug, straight, male, 4-pin, P-coded, 2.00 m
In stock
EtherCAT P cable, PUR, flex, M8, plug, straight, male, 4-pin, P-coded – M8, plug, straight, male, 4-pin, P-coded, 1.50 m
In stock
highly flexible, drag-chain suitable cable with 5 million bending cycles, max. 240 m/min, max. 30 m/s²,
min. bending radius = 81 mm (7 x OD), max. drag-chain length horizontal 20 m, vertical 5 m,
(4 x 1 mm² + (2 x 0.75 mm²) + (2 x AWG22))
The cable is UL and CSA listed.
xxxx = ordering indication of the length of the motor cable in decimetres
In stock
highly flexible, drag-chain suitable cable with 5 mio. bending cycles, max. 240 m/min, max. 30 m/s²,
min. bending radius = 81 mm (7 x OD), max. drag-chain length horizontal 20 m, vertical 5 m,
(4 x 1 mm² + (2 x 0.75 mm²) + (2 x AWG22)), from 25 m motor choke required
The cable is UL and CSA listed.
xxxx = ordering indication of the length of the motor cable in decimetres
In stock
highly flexible, drag-chain suitable cable with 5 mio. bending cycles, max. 240 m/min, max. 30 m/s²,
min. bending radius = 89 mm (7 x OD), max. drag-chain length horizontal 20 m, vertical 5 m,
(4 x 1.5 mm² + (2 x 0.75 mm²) + (2 x AWG22)), from 25 m motor choke required
The cable is UL and CSA listed.
xxxx = ordering indication of the length of the motor cable in decimetres
In stock
EtherCAT/Ethernet patch cable, PUR, RJ45, plug, straight, male, 8-pin – RJ45, plug, straight, male, 8-pin, 0.26 m
In stock
EtherCAT/Ethernet cable, PUR, flex, M8, plug, straight, male, 4-pin, A-coded – M12, flange, straight, female, 4-pin, D-coded, 2.00 m
In stock
external braking resistor, 10 Ohm, 100 W, for EL9576 brake chopper terminal and for KL9570 Bus Terminal
In stock
Fan cartridge for EtherCAT and Bus Terminals
In stock
Multi-touch Control Panel CP39xx-0010 with CP-Link 4 – The One Cable Display Link, 12.1-inch display 1280 x 800, Display only, multi-finger touch screen with CP-Link 4
In stock
The CB1050 is a computer motherboard for industrial applications. Complying to the ATX form factor, it is
equipped with an mPGA479M socket which can accomodate Intel® CPUs of the Celeron® M and
Pentium® M types. With its two DIMM184 sockets memory can be added up to 2 GByte (DDR-333 max.).
Expansion cards can be added into six PCI slots and one AGP slot. The CB1050 also offers a wide range
of internal and external connectors, such as four serial ports, two LAN connectors, six USB channels, two
IDE connectors, digital and analogue audio, CRT/LCD connector etc.
In stock
The CB1050 is a computer motherboard for industrial applications. Complying to the ATX form factor, it is
equipped with an mPGA479M socket which can accomodate Intel® CPUs of the Celeron® M and
Pentium® M types. With its two DIMM184 sockets memory can be added up to 2 GByte (DDR-333 max.).
Expansion cards can be added into six PCI slots and one AGP slot. The CB1050 also offers a wide range
of internal and external connectors, such as four serial ports, two LAN connectors, six USB channels, two
IDE connectors, digital and analogue audio, CRT/LCD connector etc.
In stock
8-channel digital input terminals 24 V DC
In stock
EtherCAT P cable, PUR, flex, M8, plug, straight, male, 4-pin, P-coded – M8, plug, straight, male, 4-pin, P-coded, 8.00 m
In stock
EtherCAT P cable, PUR, flex, M8, plug, straight, male, 4-pin, P-coded – M8, plug, straight, male, 4-pin, P-coded, 5.00 m
In stock
EtherCAT P cable, PUR, flex, M8, plug, straight, male, 4-pin, P-coded – M8, plug, straight, male, 4-pin, P-coded, 3.00 m
In stock
EtherCAT P Box, industrial housing, 8 digital inputs 24 V DC, 10 µs, or outputs 24 V DC, Imax = 0.5 A, 8 x M8
In stock
EtherCAT P Box, industrial housing, 4 digital inputs 24 V DC, 3.0 ms, 4 digital outputs 24 V DC, Imax = 0.5 A, 8 x M8; I/O connection with connector: M8, screw-type
In stock
EtherCAT Box, industrial housing, 4 analog inputs for thermocouples, type J, K, L…U, 16 bit, 4 x M12; I/O connection with connector: M12, screw-type
In stock
EtherCAT Box mit ID-Switch
In stock
PROFIsafe segment end terminal
In stock
AS interface potential feed terminal with filter
In stock
Potential distribution terminal, 4 x 24 V DC, 4 x 0 V DC
In stock
Potential distribution terminal, 8 x 24 V DC, 8 x 0 V DC
In stock
TwinSAFE Logic, PROFIsafe master and slave support
In stock
EtherCAT bridge terminal
In stock
IO-Link terminal
In stock
License key EtherCAT Terminal for TwinCAT 3.1 (with factory-installed licences)
Items 1 - 50 of 84