Beckhoff
Beckhoff implements open automation systems based on PC Control technology.
The product range covers Industrial PCs, I/O and Fieldbus Components, Drive Technology and automation software.
Products that can be used as separate components or integrated into a complete and seamless control system
are available for all industries.
The Beckhoff New Automation Technology philosophy represents universal and open control and automation solutions
that are used worldwide in a wide variety of different applications,
ranging from CNC-controlled machine tools to intelligent building automation.
Items 101 - 120 of 140
In stock
The CB1050 is a computer motherboard for industrial applications. Complying to the ATX form factor, it is
equipped with an mPGA479M socket which can accomodate Intel® CPUs of the Celeron® M and
Pentium® M types. With its two DIMM184 sockets memory can be added up to 2 GByte (DDR-333 max.).
Expansion cards can be added into six PCI slots and one AGP slot. The CB1050 also offers a wide range
of internal and external connectors, such as four serial ports, two LAN connectors, six USB channels, two
IDE connectors, digital and analogue audio, CRT/LCD connector etc.
In stock
Multi-touch Control Panel CP39xx-0010 with CP-Link 4 – The One Cable Display Link, 12.1-inch display 1280 x 800, Display only, multi-finger touch screen with CP-Link 4
In stock
Standard connector for 1,000 µm plastic fibre
In stock
Fan cartridge for EtherCAT and Bus Terminals
In stock
external braking resistor, 10 Ohm, 100 W, for EL9576 brake chopper terminal and for KL9570 Bus Terminal
In stock
EtherCAT/Ethernet cable, PUR, flex, M8, plug, straight, male, 4-pin, A-coded – M12, flange, straight, female, 4-pin, D-coded, 2.00 m
In stock
EtherCAT/Ethernet patch cable, PUR, RJ45, plug, straight, male, 8-pin – RJ45, plug, straight, male, 8-pin, 0.26 m
In stock
highly flexible, drag-chain suitable cable with 5 mio. bending cycles, max. 240 m/min, max. 30 m/s²,
min. bending radius = 89 mm (7 x OD), max. drag-chain length horizontal 20 m, vertical 5 m,
(4 x 1.5 mm² + (2 x 0.75 mm²) + (2 x AWG22)), from 25 m motor choke required
The cable is UL and CSA listed.
xxxx = ordering indication of the length of the motor cable in decimetres
In stock
highly flexible, drag-chain suitable cable with 5 mio. bending cycles, max. 240 m/min, max. 30 m/s²,
min. bending radius = 81 mm (7 x OD), max. drag-chain length horizontal 20 m, vertical 5 m,
(4 x 1 mm² + (2 x 0.75 mm²) + (2 x AWG22)), from 25 m motor choke required
The cable is UL and CSA listed.
xxxx = ordering indication of the length of the motor cable in decimetres
In stock
highly flexible, drag-chain suitable cable with 5 million bending cycles, max. 240 m/min, max. 30 m/s²,
min. bending radius = 81 mm (7 x OD), max. drag-chain length horizontal 20 m, vertical 5 m,
(4 x 1 mm² + (2 x 0.75 mm²) + (2 x AWG22))
The cable is UL and CSA listed.
xxxx = ordering indication of the length of the motor cable in decimetres
In stock
EtherCAT P cable, PUR, flex, M8, plug, straight, male, 4-pin, P-coded – M8, plug, straight, male, 4-pin, P-coded, 1.50 m
In stock
EtherCAT P cable, PUR, flex, M8, plug, straight, male, 4-pin, P-coded – M8, plug, straight, male, 4-pin, P-coded, 2.00 m
In stock
EtherCAT-P-Leitung, PUR, flex, M8, Stecker, gerade, Stift, 4‑polig, P‑kodiert – M8, Stecker, gerade, Stift, 4‑polig, P-kodiert, 3,50 m
In stock
EtherCAT-/Ethernet-plug M8, metall, IP 67, 4-pin, screwed
In stock
EtherCAT-/Ethernet-plug M8 female, metall, IP 67, 4-pin, screwed
In stock
PROFIBUS “Economy plus“ Bus Coupler for up to 64 Bus Terminals (255 with K-bus extension), 12 Mbaud
In stock
Bus end cover for ELxxxx, cover for power and E-bus contacts, grey
In stock
DIN rail Industrial PC
– 32 bit, 400 MHz CPU
– 512 MB microSD flash memory (optionally 1 GB, 2 GB, 4 GB or 8 GB)
– 64 MB internal main memory
– protocol: CANopen master, CAN Layer 2 Kommunikation
– operating system: Microsoft Windows Embedded CE 6.0
– programming: TwinCAT 2 PLC
– interfaces: 1 x Ethernet 10/100 Mbit/s (RJ45), 1 x USB device (behind the front flap)
– bus interface: D-sub connector, 9-pin according to CANopen specification, galvanically decoupled
– I/O connection: E-bus (EtherCAT Terminals) or K-bus (Bus Terminals), automatic detection
– clock: internal battery-backed clock for time and date (battery behind the front flap, exchangeable)
– UPS: 1-second UPS (for 1 MB of persistent data)
– protection class: IP 20
– weight approx. 180 g
– dimensions (W x H x D) 64 x 100 x 73 mm
In stock
EtherCAT Coupler for E-bus terminals (ELxxxx)
In stock
EtherCAT Box, industrial housing, 8-channel digital input, TwinSAFE, 24 V DC
Items 101 - 120 of 140