Items 1 - 10 of 138
EtherCAT-/Ethernet-plug M8, metall, IP 67, 4-pin, screwed
Inductive Safety Sensor ifm electronic GF711S - GIFA4004-2PS/SIL2/V4A/US
Fan cartridge for EtherCAT and Bus Terminals
SIMATIC ET 200SP, BaseUnit BU15-P16+A10+2B, BU type A0, Push-in terminals, with 10 AUX terminals, bridged to the left, WxH: 15 mmx141 mm
SIMATIC DP, Electronics module f. ET200SP, F-RQ 1x 24 V DC/24..230VAC/5A ST, 20 mm overall width, 1 relay output (2 NO) Summation output current 5 A, load voltage 24 V DC and 24.. 230 V AC, Can be used up to PL E (ISO 13849-1: 2008)/ SIL 3 (IEC 61508: 2010) if control takes place by (e.g. 6ES7136-6DB00-0CA0) F-DQ
EtherCAT-/Ethernet-plug M8 female, metall, IP 67, 4-pin, screwed
B&R Automation System 2005 CP152 CP153 PLC key
2005 programmable I/O processor, 850 kB SRAM, 1.5 MB FlashPROM, 1 RS232 interface, 1 CAN interface, CAN: Electrically isolated, network-capable, max. 12 digital inputs 24 VDC, sink, max. 12 digital outputs 24 VDC, 0.1 A, 6 analog inputs ±10 V, 14-bit, 6 analog outputs ±10 V, 12-bit, 2 outputs with +10 V and -10 V per terminal block
4-channel digital output terminal, TwinSAFE, 24 V DC, 0.5 A
Article number:E10903
for M12 sensors (for example light sensor )
only for PNP sensor
connection example see photo
Items 1 - 10 of 138