12 months from delivery to the buyer
Items 1 - 20 of 147
Best sellers
SIMATIC ET 200SP, Digital output module, DQ 8x 24V DC/0,5A Standard, Source output (PNP,P-switching) Packing unit: 1 piece, fits to BU-type A0, Colour Code CC02, substitute value output, module diagnostics for: short-circuit to L+ and ground, wire break, supply voltage
Best sellers
Inductive Safety Sensor ifm electronic GF711S - GIFA4004-2PS/SIL2/V4A/US
Top
SIMATIC ET 200SP, BaseUnit BU15-P16+A10+2B, BU type A0, Push-in terminals, with 10 AUX terminals, bridged to the left, WxH: 15 mmx141 mm
In stock
SIMATIC DP, Electronics module f. ET200SP, F-RQ 1x 24 V DC/24..230VAC/5A ST, 20 mm overall width, 1 relay output (2 NO) Summation output current 5 A, load voltage 24 V DC and 24.. 230 V AC, Can be used up to PL E (ISO 13849-1: 2008)/ SIL 3 (IEC 61508: 2010) if control takes place by (e.g. 6ES7136-6DB00-0CA0) F-DQ
In stock
4-channel digital output terminal, TwinSAFE, 24 V DC, 0.5 A
In stock
Article number:E10903
for M12 sensors (for example light sensor )
only for PNP sensor
connection example see photo
In stock
SIMATIC DP, spare part Termination module for ET 200S
In stock
4-channel analog input terminal 0…10 V, single-ended, 12 bit, 4 x 2-wire system
In stock
4-channel input terminal PT100 (RTD) for resistance sensors, 16 bit, 2-wire system
In stock
2005 programmable I/O processor, 850 kB SRAM, 1.5 MB FlashPROM, 1 RS232 interface, 1 CAN interface, CAN: Electrically isolated, network-capable, max. 12 digital inputs 24 VDC, sink, max. 12 digital outputs 24 VDC, 0.1 A, 6 analog inputs ±10 V, 14-bit, 6 analog outputs ±10 V, 12-bit, 2 outputs with +10 V and -10 V per terminal block
In stock
Balluff BCC034E cable with plug M12x1 5-pole 10m 3 wires connected (Pin 1,3,4), A-coded, PVC cable,
BCC M415-0000-1A-001-VX8334-100
In stock
Fan cartridge for EtherCAT and Bus Terminals
In stock
SIMATIC ET 200SP, BaseUnit BU15-P16+A10+2D, BU type A0, Push-in terminals, with 10 AUX terminals, New load group, WxH: 15 mmx141 mm
In stock
1-channel loop-powered input terminal 4…20 mA, with power supply for transducers via power contacts, 12 bit
In stock
8-channel digital input terminal 24 V DC, filter 3.0 ms, 1-wire system
In stock
4-channel digital input terminal, TwinSAFE, 24 V DC
In stock
SIMATIC S7-1500, digital input module DI 32x24 V DC HF, 32 channels in groups of 16; of which 2 inputs as counters can be used; input delay 0.05..20 ms input type 3 (IEC 61131); diagnostics; hardware interrupts: front connector (screw terminals or push-in) to be ordered separately
In stock
Altech CS087A-LR touch switch M8x0,75 with cable 3m
In stock
Altech CS087A-LR touch switch M8x0,75 mit Stecker M8 3-polig
In stock
B&R X20 Feldklemme 12 pol. Safety codiert - X20TB52
Items 1 - 20 of 147