Siemens
Siemens
Items 1 - 20 of 45
In stock
Communications processor CP 343-1 for connection of SIMATIC S7-300 to Industrial Ethernet over PROFNET IO Controllers, ISO, TCP/IP and UDP, S7 communication, fetch/write, SEND/RECEIVE, with and without RFC1006 Diagnostic add-ons Multicast, chargeable Communication modules, SNMP diagnostics, Initialization via LAN, DHCP, NTP-CPU Sync, 10/100 MBit, only RJ45 connection
In stock
LED module with integrated LED 24 V AC/DC, red, Spring-loaded terminal, for front plate mounting
In stock
SIMATIC S7, memory cards for S7-300, Short design, 5V Flash EPROM, 64 KB
In stock
SIMATIC S5, Adaption capsule for S5-115U/F (Design ES 902) for connection of up to 2 modules S5-135U/155U
In stock
SIMATIC DP, TERMINAL BLOCK TB1/DC (ET 200B) FOR DIGITAL ELECTR. SUBMODULES WITH 3-WIRE SCREW TERMINALS, W=160MM
In stock
SIMATIC DP, Terminal module TM-P15C23-A1 for ET 200S for power modules, 15 mm width, spring-type terminals (Cage Clamp) 2x3 terminal connections with terminal access to AUX1, AUX1 continuous
In stock
SIMATIC S7-300, Digital output SM 322, isolated, 8 DO, 24 V DC, 2A, 1x 20-pole
In stock
SIMATIC S7-300, ANALOGBAUGRUPPE SM 334, POTENTIALGEBUNDEN 4 AE/2 AA, 1 X 20-POLIG, ZIEHEN U. STECKEN MIT AKTIVEM RUECKWANDBUS MOEGLICH
In stock
SIMATIC S7, Safety protector between F and standard modules With redundant ET 200M interface modules, use only with partition
In stock
SIMATIC DP, 5 electronic modules for ET 200S, 2 DO High Feature 24 V DC/2 A, 15 mm width, Diagnostics short circuit and wire break, Substitute value output with LED SF (group fault) 5 units per packing unit
In stock
SIMATIC DP, 5 ELECTRON. MODULES FOR ET 200S, 4 DI HIGH FEATURE 24V DC, 15 MM WIDTH WITH PARAM. F. INPUT DELAY DIAGNOSIS F. ENCODER SHORT- CIRCUIT W. LED SF (GROUP FAULT) 5 PIECES PER PACKAGING UNIT
In stock
SIMATIC DP, 5 ELEKTRONIKMODULE FUER ET 200S, 2 DO HIGH FEATURE DC 24V/0,5A, 15MM BAUBREITE DIAGNOSE KURZSCHLUSS UND DRAHTBRUCH, ERSATZWERTAUSGABE MIT LED SF (SAMMELFEHLER) 5 STUECK JE VERPACKUNGSEINHEIT
In stock
SIMATIC ET 200SP, digital output module, DQ 4x 24VDC/2A Standard, suitable for BU type A0, Color code CC02, Module diagnostics
In stock
SIMATIC ET 200SP, BaseUnit BU15-P16+A0+2B, BU type A0, Push-in terminals, without AUX terminals, bridged to the left, WxH: 15x 117 mm
In stock
SIMATIC ET 200SP, BaseUnit BU15-P16+A0+2D, BU type A0, Push-in terminals, without AUX terminals, New load group, WxH: 15x 117 mm
Top
SIMATIC ET 200SP, BaseUnit BU15-P16+A10+2B, BU type A0, Push-in terminals, with 10 AUX terminals, bridged to the left, WxH: 15 mmx141 mm
In stock
SIMATIC ET 200SP, BaseUnit BU15-P16+A10+2D, BU type A0, Push-in terminals, with 10 AUX terminals, New load group, WxH: 15 mmx141 mm
In stock
SIMATIC ET 200SP, BusAdapter BA 2xRJ45, 2 RJ45 sockets
In stock
SIMATIC ET 200SP, CM 4xIO-Link ST Communication module IO-Link Master V1.1
In stock
SIMATIC DP, Electronics module for ET 200SP, F-DQ 4X24 V DC/2A, 15 mm width, up to PL E (ISO 13849) up to SIL 3 (IEC 61508)
Items 1 - 20 of 45