Siemens
Siemens
Items 1 - 20 of 54
In stock
Siemens 6ES7153-4AA00-0XB0 ist ein ET 200M IM153-4 PN IO-Modul für S7-300, hohe Datenraten, einfache Integration, robustes Design für Industrieautomation.
In stock
SCALANCE XB008 Unmanaged Industrial Ethernet Switch for 10/100 Mbit/s, for setting up small star and line topologies, LED diagnostics, IP20, 24 V AC/DC power supply, with 8x 10/100 Mbit/s twisted pair ports with RJ45 sockets, Manual available as a download .
In stock
SCALANCE XC108, Unmanaged IE switch, 8x 10/100 Mbit/s RJ45 ports, LED diagnostics, error-signaling contact with set pushbutton, redundant power supply Manual available as a download
In stock
SITOP POWER 7, SPECIAL LINE STABILIZED AS-I POWER SUPPLY INPUT: 120/230 V AC OUTPUT: 30 V DC/7 A S7-300 DESIGN
various defects, see photos;
untested, no guarantee or warranty, no Returns;
In stock
SIMATIC DP, Terminal module TM-P15C23-A1 for ET 200S for power modules, 15 mm width, spring-type terminals (Cage Clamp) 2x3 terminal connections with terminal access to AUX1, AUX1 continuous
In stock
SIMATIC S7-1500, digital output module DQ16x24 V DC/0.5A HF, 16 channels in groups of 8, 4 A per group, single-channel diagnostics, substitute value: switching cycle counter for connected actuators. the module supports the safety-oriented shutdown of load groups up to SIL2 according to EN IEC 62061:2021 and Category 3 / PL d according to EN ISO 13849-1:2015. front connector (screw terminals or push-in) to be ordered separately
In stock
Siemens 6GK7343-1GX11-0XE0: CP 343-1 Communication processor for SIMATIC S7-300, Ethernet TCP/IP, MPI, RJ45, S7-Comm., Fetch/Write, Diagnosis.
In stock
SIMATIC ET 200SP, PROFINET interface module IM155-6PN High Speed max. 30 I/O modules, 0.125 ms isochronous mode Multi-hotswap, incl. server module
In stock
SIMATIC DP, 5 ELEKTRONIKMODULE FUER ET 200S, 2 DO HIGH FEATURE DC 24V/0,5A, 15MM BAUBREITE DIAGNOSE KURZSCHLUSS UND DRAHTBRUCH, ERSATZWERTAUSGABE MIT LED SF (SAMMELFEHLER) 5 STUECK JE VERPACKUNGSEINHEIT
In stock
SIMATIC DP, 5 electronic modules for ET 200S, 2 DO High Feature 24 V DC/2 A, 15 mm width, Diagnostics short circuit and wire break, Substitute value output with LED SF (group fault) 5 units per packing unit
In stock
SIMATIC S7, Safety protector between F and standard modules With redundant ET 200M interface modules, use only with partition
In stock
SIMATIC ET 200SP, CM 4xIO-Link ST Communication module IO-Link Master V1.1
In stock
SIMATIC ET 200SP, BaseUnit BU15-P16+A0+2B, BU type A0, Push-in terminals, without AUX terminals, bridged to the left, WxH: 15x 117 mm
In stock
SIMATIC ET 200SP, BaseUnit BU15-P16+A0+2D, BU type A0, Push-in terminals, without AUX terminals, New load group, WxH: 15x 117 mm
In stock
SIMATIC ET 200SP, BaseUnit BU20-P8+A4+0B, BU type F0, Push-in terminals, with 4 AUX terminals, bridged to the left, WxH: 20 mmx117 mm
In stock
Communications processor CP 343-1 for connection of SIMATIC S7-300 to Industrial Ethernet over PROFNET IO Controllers, ISO, TCP/IP and UDP, S7 communication, fetch/write, SEND/RECEIVE, with and without RFC1006 Diagnostic add-ons Multicast, chargeable Communication modules, SNMP diagnostics, Initialization via LAN, DHCP, NTP-CPU Sync, 10/100 MBit, only RJ45 connection
In stock
SIMATIC HMI KTP900F Mobile, 9.0 inch TFT display, 800x 480 pixel, 16m colors, key and touch operation, 10 function keys, 1x PROFINET/Industrial Ethernet interface, 1x multimedia card, 1x USB, Key-operated switch, acknowledgement button, 1 emergency stop/stop button configurable from WinCC Comfort V13 SP1
In stock
SIMATIC S5, Interface module for CP 524 and CPU 928B 20 mA interface (TTY)
In stock
SIMATIC S5, Interface module for CP 524 and CPU 928B V.24/V.28 (RS 232C)
In stock
SIMATIC S5, Memory module 373 CMOS-EPROM, 32 KB
Items 1 - 20 of 54