Siemens
Siemens
Items 1 - 20 of 54
In stock
SITOP POWER 7, SPECIAL LINE STABILIZED AS-I POWER SUPPLY INPUT: 120/230 V AC OUTPUT: 30 V DC/7 A S7-300 DESIGN
various defects, see photos;
untested, no guarantee or warranty, no Returns;
In stock
Communications processor CP 343-1 for connection of SIMATIC S7-300 to Industrial Ethernet over PROFNET IO Controllers, ISO, TCP/IP and UDP, S7 communication, fetch/write, SEND/RECEIVE, with and without RFC1006 Diagnostic add-ons Multicast, chargeable Communication modules, SNMP diagnostics, Initialization via LAN, DHCP, NTP-CPU Sync, 10/100 MBit, only RJ45 connection
In stock
Communications processor CP 342-5 for connection of SIMATIC S7-300 to PROFIBUS DP, S5-compatible, PG/OP and S7 communication
defective: bus error;
In stock
Siemens SIMATIC S7-300 CPU 1P 6ES7 315-2AG10-0AB0 DC 24V Defekt
In stock
LED module with integrated LED 24 V AC/DC, red, Spring-loaded terminal, for front plate mounting
In stock
SIMATIC S7, memory cards for S7-300, Short design, 5V Flash EPROM, 64 KB
In stock
Siemens 6GK7343-1GX11-0XE0: CP 343-1 Communication processor for SIMATIC S7-300, Ethernet TCP/IP, MPI, RJ45, S7-Comm., Fetch/Write, Diagnosis.
In stock
SINAMICS G120D Power Module PM250D with integrated Class A filter capable of energy recovery. 380-480 V 3 AC+10/-10% 47-63Hz Power high overload: 0.75kW at 200% 3s, 150% 60S, 100% 300S Ambient temperature -10 to +55 °C 210x 450x 110 (HxWxD), FSA Degree of protection IP65 without Control Unit
Heatsink slightly damaged, but in working order
In stock
SIMATIC S5, Adaption capsule for S5-115U/F (Design ES 902) for connection of up to 2 modules S5-135U/155U
In stock
SIMATIC DP, INTERFACE IM 153-1, FOR ET 200M, FOR MAX. 8 S7-300 MODULES
defective: bus error;
In stock
SIMATIC DP, TERMINAL BLOCK TB1/DC (ET 200B) FOR DIGITAL ELECTR. SUBMODULES WITH 3-WIRE SCREW TERMINALS, W=160MM
In stock
SIMATIC DP, Terminal module TM-P15C23-A1 for ET 200S for power modules, 15 mm width, spring-type terminals (Cage Clamp) 2x3 terminal connections with terminal access to AUX1, AUX1 continuous
In stock
SIMATIC S7-300, Digital output SM 322, isolated, 8 DO, 24 V DC, 2A, 1x 20-pole
In stock
SIMATIC S7-300, Digital output SM 322, isolated, 16 DO, 24 V DC, 0.5A, 1x 20-pole, Total current 4 A/group (8 A/module)
defective: module is not recognized in Simatic manager
In stock
SM323, 16DI/DO, DC24V, 0,5A
In stock
SIMATIC S7-300, ANALOGBAUGRUPPE SM 334, POTENTIALGEBUNDEN 4 AE/2 AA, 1 X 20-POLIG, ZIEHEN U. STECKEN MIT AKTIVEM RUECKWANDBUS MOEGLICH
In stock
SIMATIC S7, Safety protector between F and standard modules With redundant ET 200M interface modules, use only with partition
In stock
SIMATIC DP, 5 electronic modules for ET 200S, 2 DO High Feature 24 V DC/2 A, 15 mm width, Diagnostics short circuit and wire break, Substitute value output with LED SF (group fault) 5 units per packing unit
In stock
SIMATIC DP, 5 ELECTRON. MODULES FOR ET 200S, 4 DI HIGH FEATURE 24V DC, 15 MM WIDTH WITH PARAM. F. INPUT DELAY DIAGNOSIS F. ENCODER SHORT- CIRCUIT W. LED SF (GROUP FAULT) 5 PIECES PER PACKAGING UNIT
In stock
SIMATIC DP, 5 ELEKTRONIKMODULE FUER ET 200S, 2 DO HIGH FEATURE DC 24V/0,5A, 15MM BAUBREITE DIAGNOSE KURZSCHLUSS UND DRAHTBRUCH, ERSATZWERTAUSGABE MIT LED SF (SAMMELFEHLER) 5 STUECK JE VERPACKUNGSEINHEIT
Items 1 - 20 of 54